Creating a SoupServer

As with the client API, there is a single object that will encapsulate most of your interactions with libsoup. In this case, SoupServer.

You create the server with soup_server_new, and as with the SoupSession constructor, you can specify a few additional options:

Adding Listening Sockets

To tell the server where to listen, call soup_server_listen (to listen on a specific GSocketAddress), soup_server_listen_all (to listen on a given port on all network interfaces), or soup_server_listen_local (to listen to a given port on the loopback interface only). You can call any of these functions multiple times, to set up multiple listening sockets.

To set up an HTTPS server, you must first either set the SOUP_SERVER_TLS_CERTIFICATE property, or else call soup_server_set_ssl_cert_file. After that you can pass the SOUP_SERVER_LISTEN_HTTPS option to soup_server_listen, etc.

By default, servers listen for both IPv4 and IPv6 connections; if you don't want this, use the SOUP_SERVER_LISTEN_IPV4_ONLY or SOUP_SERVER_LISTEN_IPV6_ONLY options.

The server runs asynchronously, in the thread-default GMainContext of the thread in which the "listen" calls were made.

The Old SoupServer Listening API

soup_server_listen, etc, are available only in libsoup 2.46 and later. In earlier versions, there was a simpler API, in which a server could only listen on a single port, determined at construct time either by passing the SOUP_SERVER_INTERFACE property (to specify a SoupAddress to listen on), or the SOUP_SERVER_PORT property (to specify a port to listen on, on all interfaces). The SOUP_SERVER_SSL_CERT_FILE and SOUP_SERVER_SSL_KEY_FILE properties could be used to create an HTTP server.

When using this API, if SoupServer is unable to bind the listening socket, or unable to read the provided certificate or key files, then it will return NULL from its constructor (with no further indication of what exactly went wrong).

Additionally, when using this API, it is necessary to call soup_server_run or soup_server_run_async to start the server after creating it.

Adding Handlers

By default, SoupServer returns "404 Not Found" in response to all requests (except ones that it can't parse, which get "400 Bad Request"). To override this behavior, call soup_server_add_handler to set a callback to handle certain URI paths.

1
2

soup_server_add_handler (server, "/foo", server_callback,
                         data, destroy_notify);

The "/foo" indicates the base path for this handler. When a request comes in, if there is a handler registered for exactly the path in the request's Request-URI, then that handler will be called. Otherwise libsoup will strip path components one by one until it finds a matching handler. So for example, a request of the form "GET /foo/bar/baz.php?a=1&b=2 HTTP/1.1" would look for handlers for "/foo/bar/baz.php", "/foo/bar", and "/foo". If a handler has been registered with a NULL base path, then it is used as the default handler for any request that doesn't match any other handler.

Responding to Requests

A handler callback looks something like this:

1
2
3
4
5
6
7
8
9
10

static void
server_callback (SoupServer        *server,
                 SoupMessage       *msg, 
                 const char        *path,
                 GHashTable        *query,
                 SoupClientContext *client,
                 gpointer           user_data)
{
	...
}

msg is the request that has been received and user_data is the data that was passed to soup_server_add_handler. path is the path (from msg's URI), and query contains the result of parsing the URI query field. (It is NULL if there was no query.) client is a SoupClientContext, which contains additional information about the client (including its IP address, and whether or not it used HTTP authentication).

By default, libsoup assumes that you have completely finished processing the message when you return from the callback, and that it can therefore begin sending the response. If you are not ready to send a response immediately (eg, you have to contact another server, or wait for data from a database), you must call soup_server_pause_message on the message before returning from the callback. This will delay sending a response until you call soup_server_unpause_message. (You must also connect to the finished signal on the message in this case, so that you can break off processing if the client unexpectedly disconnects before you start sending the data.)

To set the response status, call soup_message_set_status or soup_message_set_status_full. If the response requires a body, you must decide whether to use Content-Length encoding (the default), or chunked encoding.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

static void
server_callback (SoupServer        *server,
                 SoupMessage       *msg, 
                 const char        *path,
                 GHashTable        *query,
                 SoupClientContext *client,
                 gpointer           user_data)
{
	MyServerData *server_data = user_data;
	const char *mime_type;
	GByteArray *body;

	if (msg->method != SOUP_METHOD_GET) {
		soup_message_set_status (msg, SOUP_STATUS_NOT_IMPLEMENTED);
		return;
	}

	/* This is somewhat silly. Presumably your server will do
	 * something more interesting.
	 */
	body = g_hash_table_lookup (server_data->bodies, path);
	mime_type = g_hash_table_lookup (server_data->mime_types, path);
	if (!body || !mime_type) {
		soup_message_set_status (msg, SOUP_STATUS_NOT_FOUND);
		return;
	}

	soup_message_set_status (msg, SOUP_STATUS_OK);
	soup_message_set_response (msg, mime_type, SOUP_MEMORY_COPY,
	                           body->data, body->len);
}

Handling Authentication

To have SoupServer handle HTTP authentication for you, create a SoupAuthDomainBasic or SoupAuthDomainDigest, and pass it to soup_server_add_auth_domain:

1
2
3
4
5
6
7
8
9
10
11

SoupAuthDomain *domain;

domain = soup_auth_domain_basic_new (
	SOUP_AUTH_DOMAIN_REALM, "My Realm",
	SOUP_AUTH_DOMAIN_BASIC_AUTH_CALLBACK, auth_callback,
	SOUP_AUTH_DOMAIN_BASIC_AUTH_DATA, auth_data,
	SOUP_AUTH_DOMAIN_ADD_PATH, "/foo",
	SOUP_AUTH_DOMAIN_ADD_PATH, "/bar/private",
	NULL);
soup_server_add_auth_domain (server, domain);
g_object_unref (domain);

Then, every request under one of the auth domain's paths will be passed to the auth_callback first before being passed to the server_callback:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

static gboolean
auth_callback (SoupAuthDomain *domain, SoupMessage *msg,
               const char *username, const char *password,
               gpointer user_data)
{
	MyServerData *server_data = user_data;
	MyUserData *user;

	user = my_server_data_lookup_user (server_data, username);
	if (!user)
		return FALSE;

	/* FIXME: Don't do this. Keeping a cleartext password database
	 * is bad.
	 */
	return strcmp (password, user->password) == 0;
}

The SoupAuthDomainBasicAuthCallback is given the username and password from the Authorization header and must determine, in some server-specific manner, whether or not to accept them. (In this example we compare the password against a cleartext password database, but it would be better to store the password somehow encoded, as in the UNIX password database. Alternatively, you may need to delegate the password check to PAM or some other service.)

If you are using Digest authentication, note that SoupAuthDomainDigestAuthCallback works completely differently (since the server doesn't receive the cleartext password from the client in that case, so there's no way to compare it directly). See the documentation for SoupAuthDomainDigest for more details.

You can have multiple SoupAuthDomains attached to a SoupServer, either in separate parts of the path hierarchy, or overlapping. (Eg, you might want to accept either Basic or Digest authentication for a given path.) When more than one auth domain covers a given path, the request will be accepted if the user authenticates successfully against any of the domains.

If you want to require authentication for some requests under a certain path, but not all of them (eg, you want to authenticate PUT requests, but not GET requests), use a SoupAuthDomainFilter.