manpagez: man pages & more
info gnupg
Home | html | info | man

File: gnupg.info,  Node: Howto Create a Server Cert,  Up: Howtos

12.1 Creating a TLS server certificate
======================================

Here is a brief run up on how to create a server certificate.  It has
actually been done this way to get a certificate from CAcert to be used
on a real server.  It has only been tested with this CA, but there
shouldn't be any problem to run this against any other CA.

   We start by generating an X.509 certificate signing request.  As
there is no need for a configuration file, you may simply enter:

       $ gpgsm --generate-key >example.com.cert-req.pem
       Please select what kind of key you want:
          (1) RSA
          (2) Existing key
          (3) Existing key from card
       Your selection? 1

   I opted for creating a new RSA key.  The other option is to use an
already existing key, by selecting '2' and entering the so-called
keygrip.  Running the command 'gpgsm --dump-secret-key USERID' shows you
this keygrip.  Using '3' offers another menu to create a certificate
directly from a smart card based key.

   Let's continue:

       What keysize do you want? (3072)
       Requested keysize is 3072 bits

   Hitting enter chooses the default RSA key size of 3072 bits.  Keys
smaller than 2048 bits are too weak on the modern Internet.  If you
choose a larger (stronger) key, your server will need to do more work.

       Possible actions for a RSA key:
          (1) sign, encrypt
          (2) sign
          (3) encrypt
       Your selection? 1

   Selecting "sign" enables use of the key for Diffie-Hellman key
exchange mechanisms (DHE and ECDHE) in TLS, which are preferred because
they offer forward secrecy.  Selecting "encrypt" enables RSA key
exchange mechanisms, which are still common in some places.  Selecting
both enables both key exchange mechanisms.

   Now for some real data:

       Enter the X.509 subject name: CN=example.com

   This is the most important value for a server certificate.  Enter
here the canonical name of your server machine.  You may add other
virtual server names later.

       E-Mail addresses (end with an empty line):
       >

   We don't need email addresses in a TLS server certificate and CAcert
would anyway ignore such a request.  Thus just hit enter.

   If you want to create a client certificate for email encryption, this
would be the place to enter your mail address (e.g.  ).
You may enter as many addresses as you like, however the CA may not
accept them all or reject the entire request.

       Enter DNS names (optional; end with an empty line):
       > example.com
       > www.example.com
       >

   Here I entered the names of the services which the machine actually
provides.  You almost always want to include the canonical name here
too.  The browser will accept a certificate for any of these names.  As
usual the CA must approve all of these names.

       URIs (optional; end with an empty line):
       >

   It is possible to insert arbitrary URIs into a certificate; for a
server certificate this does not make sense.

       Create self-signed certificate? (y/N)

   Since we are creating a certificate signing request, and not a full
certificate, we answer no here, or just hit enter for the default.

   We have now entered all required information and 'gpgsm' will display
what it has gathered and ask whether to create the certificate request:

       These parameters are used:
           Key-Type: RSA
           Key-Length: 3072
           Key-Usage: sign, encrypt
           Name-DN: CN=example.com
           Name-DNS: example.com
           Name-DNS: www.example.com

       Proceed with creation? (y/N) y

   'gpgsm' will now start working on creating the request.  As this
includes the creation of an RSA key it may take a while.  During this
time you will be asked 3 times for a passphrase to protect the created
private key on your system.  A pop up window will appear to ask for it.
The first two prompts are for the new passphrase and for re-entering it;
the third one is required to actually create the certificate signing
request.

   When it is ready, you should see the final notice:

       Ready.  You should now send this request to your CA.

   Now, you may look at the created request:

       $ cat example.com.cert-req.pem
       -----BEGIN CERTIFICATE REQUEST-----
       MIIClTCCAX0CAQAwFjEUMBIGA1UEAxMLZXhhbXBsZS5jb20wggEiMA0GCSqGSIb3
       DQEBAQUAA4IBDwAwggEKAoIBAQDP1QEcbTvOLLCX4gAoOzH9AW7jNOMj7OSOL0uW
       h2bCdkK5YVpnX212Z6COTC3ZG0pJiCeGt1TbbDJUlTa4syQ6JXavjK66N8ASZsyC
       Rwcl0m6hbXp541t1dbgt2VgeGk25okWw3j+brw6zxLD2TnthJxOatID0lDIG47HW
       GqzZmA6WHbIBIONmGnReIHTpPAPCDm92vUkpKG1xLPszuRmsQbwEl870W/FHrsvm
       DPvVUUSdIvTV9NuRt7/WY6G4nPp9QlIuTf1ESPzIuIE91gKPdrRCAx0yuT708S1n
       xCv3ETQ/bKPoAQ67eE3mPBqkcVwv9SE/2/36Lz06kAizRgs5AgMBAAGgOjA4Bgkq
       hkiG9w0BCQ4xKzApMCcGA1UdEQQgMB6CC2V4YW1wbGUuY29tgg93d3cuZXhhbXBs
       ZS5jb20wDQYJKoZIhvcNAQELBQADggEBAEWD0Qqz4OENLYp6yyO/KqF0ig9FDsLN
       b5/R+qhms5qlhdB5+Dh+j693Sj0UgbcNKc6JT86IuBqEBZmRCJuXRoKoo5aMS1cJ
       hXga7N9IA3qb4VBUzBWvlL92U2Iptr/cEbikFlYZF2Zv3PBv8RfopVlI3OLbKV9D
       bJJTt/6kuoydXKo/Vx4G0DFzIKNdFdJk86o/Ziz8NOs9JjZxw9H9VY5sHKFM5LKk
       VcLwnnLRlNjBGB+9VK/Tze575eG0cJomTp7UGIB+1xzIQVAhUZOizRDv9tHDeaK3
       k+tUhV0kuJcYHucpJycDSrP/uAY5zuVJ0rs2QSjdnav62YrRgEsxJrU=
       -----END CERTIFICATE REQUEST-----
       $

   You may now proceed by logging into your account at the CAcert
website, choose 'Server Certificates - New', check 'sign by class 3 root
certificate', paste the above request block into the text field and
click on 'Submit'.

   If everything works out fine, a certificate will be shown.  Now run

     $ gpgsm --import

   and paste the certificate from the CAcert page into your terminal
followed by a Ctrl-D

       -----BEGIN CERTIFICATE-----
       MIIEIjCCAgqgAwIBAgIBTDANBgkqhkiG9w0BAQQFADBUMRQwEgYDVQQKEwtDQWNl
        [...]
       rUTFlNElRXCwIl0YcJkIaYYqWf7+A/aqYJCi8+51usZwMy3Jsq3hJ6MA3h1BgwZs
       Rtct3tIX
       -----END CERTIFICATE-----
       gpgsm: issuer certificate (#/CN=CAcert Class 3 Ro[...]) not found
       gpgsm: certificate imported

       gpgsm: total number processed: 1
       gpgsm:               imported: 1

   'gpgsm' tells you that it has imported the certificate.  It is now
associated with the key you used when creating the request.  The root
certificate has not been found, so you may want to import it from the
CACert website.

   To see the content of your certificate, you may now enter:

       $ gpgsm -K example.com
       /home/foo/.gnupg/pubring.kbx
       ---------------------------
       Serial number: 4C
              Issuer: /CN=CAcert Class 3 Root/OU=http:\x2f\x2fwww.[...]
             Subject: /CN=example.com
                 aka: (dns-name example.com)
                 aka: (dns-name www.example.com)
            validity: 2015-07-01 16:20:51 through 2016-07-01 16:20:51
            key type: 3072 bit RSA
           key usage: digitalSignature keyEncipherment
       ext key usage: clientAuth (suggested), serverAuth (suggested), [...]
         fingerprint: 0F:9C:27:B2:DA:05:5F:CB:33:D8:19:E9:65:B9:4F:BD:B1:98:CC:57

   I used '-K' above because this will only list certificates for which
a private key is available.  To see more details, you may use
'--dump-secret-keys' instead of '-K'.

   To make actual use of the certificate you need to install it on your
server.  Server software usually expects a PKCS\#12 file with key and
certificate.  To create such a file, run:

       $ gpgsm --export-secret-key-p12 -a >example.com-cert.pem

   You will be asked for the passphrase as well as for a new passphrase
to be used to protect the PKCS\#12 file.  The file now contains the
certificate as well as the private key:

       $ cat example-cert.pem
       Issuer ...: /CN=CAcert Class 3 Root/OU=http:\x2f\x2fwww.CA[...]
       Serial ...: 4C
       Subject ..: /CN=example.com
           aka ..: (dns-name example.com)
           aka ..: (dns-name www.example.com)

       -----BEGIN PKCS12-----
       MIIHlwIBAzCCB5AGCSqGSIb37QdHAaCCB4EEggd9MIIHeTk1BJ8GCSqGSIb3DQEu
       [...many more lines...]
       -----END PKCS12-----
       $

   Copy this file in a secure way to the server, install it there and
delete the file then.  You may export the file again at any time as long
as it is available in GnuPG's private key database.

© manpagez.com 2000-2024
Individual documents may contain additional copyright information.