Apache2::SizeLimit(3)
NAME
Apache2::SizeLimit - Because size does matter.
Synopsis
This module allows you to kill off Apache httpd processes if they grow
too large. You can choose to set up the process size limiter to check
the process size on every request:
# in your startup.pl, or a <Perl> section:
use Apache2::SizeLimit;
# sizes are in KB
$Apache2::SizeLimit::MAX_PROCESS_SIZE = 12000; # 12MB
$Apache2::SizeLimit::MIN_SHARE_SIZE = 6000; # 6MB
$Apache2::SizeLimit::MAX_UNSHARED_SIZE = 5000; # 5MB
# in your httpd.conf:
PerlCleanupHandler Apache2::SizeLimit
Or you can just check those requests that are likely to get big, such
as CGI requests. This way of checking is also easier for those who are
mostly just running CGI scripts under "ModPerl::Registry":
# in your script:
use Apache2::SizeLimit;
# sizes are in KB
Apache2::SizeLimit::setmax(12000);
Apache2::SizeLimit::setmin(6000);
Apache2::SizeLimit::setmax_unshared(5000);
This will work in places where you are using "SetHandler perl-script"
or anywhere you enable "PerlOptions +GlobalRequest". If you want to
avoid turning on "GlobalRequest", you can pass an "Apache2::RequestRec"
object as the second argument in these subs:
my $r = shift; # if you don't have $r already
Apache2::SizeLimit::setmax(12000, $r);
Apache2::SizeLimit::setmin(6000, $r);
Apache2::SizeLimit::setmax_unshared(5000, $r);
Since checking the process size can take a few system calls on some
platforms (e.g. linux), you may want to only check the process size
every N times. To do so, put this in your startup.pl or CGI:
$Apache2::SizeLimit::CHECK_EVERY_N_REQUESTS = 2;
This will only check the process size every other time the process size
checker is called.
Description
This module is highly platform dependent, please read the Caveats
section. It also does not work under threaded MPMs.
This module was written in response to questions on the mod_perl
mailing list on how to tell the httpd process to exit if it gets too
big.
Actually there are two big reasons your httpd children will grow.
First, it could have a bug that causes the process to increase in size
dramatically, until your system starts swapping. Second, it may just
do things that requires a lot of memory, and the more different kinds
of requests your server handles, the larger the httpd processes grow
over time.
This module will not really help you with the first problem. For that
you should probably look into "Apache2::Resource" or some other means
of setting a limit on the data size of your program. BSD-ish systems
have "setrlimit()" which will croak your memory gobbling processes.
However it is a little violent, terminating your process in mid-
request.
This module attempts to solve the second situation where your process
slowly grows over time. The idea is to check the memory usage after
every request, and if it exceeds a threshold, exit gracefully.
By using this module, you should be able to discontinue using the
Apache configuration directive "MaxRequestsPerChild", although you can
use both if you are feeling paranoid. Most users use the technique
shown in this module and set their "MaxRequestsPerChild" value to 0.
Shared Memory Options
In addition to simply checking the total size of a process, this module
can factor in how much of the memory used by the process is actually
being shared by copy-on-write. If you don't understand how memory is
shared in this way, take a look at the extensive documentation at
http://perl.apache.org/docs/.
You can take advantage of the shared memory information by setting a
minimum shared size and/or a maximum unshared size. Experience on one
heavily trafficked mod_perl site showed that setting maximum unshared
size and leaving the others unset is the most effective policy. This
is because it only kills off processes that are truly using too much
physical RAM, allowing most processes to live longer and reducing the
process churn rate.
Caveats
This module is platform-dependent, since finding the size of a process
is pretty different from OS to OS, and some platforms may not be
supported. In particular, the limits on minimum shared memory and
maximum shared memory are currently only supported on Linux and BSD.
If you can contribute support for another OS, please do.
Supported OSes
linux
For linux we read the process size out of /proc/self/statm. This
seems to be fast enough on modern systems. If you are worried about
performance, try setting the "CHECK_EVERY_N_REQUESTS" option.
Since linux 2.6 /proc/self/statm does not report the amount of
memory shared by the copy-on-write mechanism as shared memory.
Hence decisions made on the basis of "MAX_UNSHARED_SIZE" or
"MIN_SHARE_SIZE" are inherently wrong.
To correct the situation there is a patch to the linux kernel that
adds a /proc/self/smaps entry for each process. At the time of this
writing the patch is included in the mm-tree (linux-2.6.13-rc4-mm1)
and is expected to make it into the vanilla kernel in the near
future.
/proc/self/smaps reports various sizes for each memory segment of a
process and allows to count the amount of shared memory correctly.
If "Apache2::SizeLimit" detects a kernel that supports
/proc/self/smaps and if the "Linux::Smaps" module is installed it
will use them instead of /proc/self/statm. You can prevent
"Apache2::SizeLimit" from using /proc/self/smaps and turn on the
old behaviour by setting $Apache2::SizeLimit::USE_SMAPS to 0 before
the first check.
"Apache2::SizeLimit" also resets $Apache2::SizeLimit::USE_SMAPS to
0 if it somehow decides not to use /proc/self/smaps. Thus, you can
check it to determine what is actually used.
NOTE: Reading /proc/self/smaps is expensive compared to
/proc/self/statm. It must look at each page table entry of a
process. Further, on multiprocessor systems the access is
synchronized with spinlocks. Hence, you are encouraged to set the
"CHECK_EVERY_N_REQUESTS" option.
The following example shows the effect of copy-on-write:
<Perl>
require Apache2::SizeLimit;
package X;
use strict;
use Apache2::RequestRec ();
use Apache2::RequestIO ();
use Apache2::Const -compile=>qw(OK);
my $x= "a" x (1024*1024);
sub handler {
my $r = shift;
my ($size, $shared) = $Apache2::SizeLimit::HOW_BIG_IS_IT->();
$x =~ tr/a/b/;
my ($size2, $shared2) = $Apache2::SizeLimit::HOW_BIG_IS_IT->();
$r->content_type('text/plain');
$r->print("1: size=$size shared=$shared\n");
$r->print("2: size=$size2 shared=$shared2\n");
return Apache2::Const::OK;
}
</Perl>
<Location /X>
SetHandler modperl
PerlResponseHandler X
</Location>
The parent apache allocates a megabyte for the string in $x. The
"tr"-command then overwrites all "a" with "b" if the handler is
called with an argument. This write is done in place, thus, the
process size doesn't change. Only $x is not shared anymore by means
of copy-on-write between the parent and the child.
If /proc/self/smaps is available curl shows:
r2@s93:~/work/mp2> curl http://localhost:8181/X
1: size=13452 shared=7456
2: size=13452 shared=6432
Shared memory has lost 1024 kB. The process' overall size remains
unchanged.
Without /proc/self/smaps it says:
r2@s93:~/work/mp2> curl http://localhost:8181/X
1: size=13052 shared=3628
2: size=13052 shared=3636
One can see the kernel lies about the shared memory. It simply
doesn't count copy-on-write pages as shared.
Solaris 2.6 and above
For Solaris we simply retrieve the size of /proc/self/as, which
contains the address-space image of the process, and convert to KB.
Shared memory calculations are not supported.
NOTE: This is only known to work for solaris 2.6 and above.
Evidently the /proc filesystem has changed between 2.5.1 and 2.6.
Can anyone confirm or deny?
BSD Uses "BSD::Resource::getrusage()" to determine process size. This
is pretty efficient (a lot more efficient than reading it from the
/proc fs anyway).
AIX?
Uses "BSD::Resource::getrusage()" to determine process size. Not
sure if the shared memory calculations will work or not. AIX
users?
Win32
Under mod_perl 1, SizeLimit provided basic functionality by using
"Win32::API" to access process memory information. This worked
because there was only one mod_perl thread. With mod_perl 2, Win32
runs a true threaded MPM, which unfortunately means that we can't
tell the size of each interpreter. Win32 support is disabled until
a solution for this can be found.
If your platform is not supported, and if you can tell us how to check
for the size of a process under your OS (in KB), then we will add it to
the list. The more portable/efficient the solution, the better, of
course.
Supported MPMs
At this time, "Apache2::SizeLimit" does not support use under threaded
MPMs. This is because there is no efficient way to get the memory
usage of a thread, or make a thread exit cleanly. Suggestions and
patches are welcome on the mod_perl dev mailing list.
Copyright
mod_perl 2.0 and its core modules are copyrighted under The Apache
Software License, Version 2.0.
Author
Doug Bagley <doug+modperl bagley.org>, channeling Procrustes.
Brian Moseley <ix maz.org>: Solaris 2.6 support
Doug Steinwand and Perrin Harkins <perrin elem.com>: added support for
shared memory and additional diagnostic info
Matt Phillips <mphillips virage.com> and Mohamed Hendawi <mhendawi
virage.com>: Win32 support
Torsten Foertsch <torsten.foertsch gmx.net>: Linux::Smaps support
perl v5.10.0 Apache2::SizeLimit(3)
Mac OS X 10.6 - Generated Thu Sep 17 20:10:32 CDT 2009