manpagez: man pages & more
man BIO_s_mem(3)
Home | html | info | man
BIO_S_MEM(3ossl)                    OpenSSL                   BIO_S_MEM(3ossl)



NAME

       BIO_s_secmem, BIO_s_dgram_mem, BIO_s_mem, BIO_set_mem_eof_return,
       BIO_get_mem_data, BIO_set_mem_buf, BIO_get_mem_ptr, BIO_new_mem_buf -
       memory BIO


SYNOPSIS

        #include <openssl/bio.h>

        const BIO_METHOD *BIO_s_mem(void);
        const BIO_METHOD *BIO_s_dgram_mem(void);
        const BIO_METHOD *BIO_s_secmem(void);

        BIO_set_mem_eof_return(BIO *b, int v);
        long BIO_get_mem_data(BIO *b, char **pp);
        BIO_set_mem_buf(BIO *b, BUF_MEM *bm, int c);
        BIO_get_mem_ptr(BIO *b, BUF_MEM **pp);

        BIO *BIO_new_mem_buf(const void *buf, int len);


DESCRIPTION

       BIO_s_mem(3) returns the memory BIO method function.

       A memory BIO is a source/sink BIO which uses memory for its I/O. Data
       written to a memory BIO is stored in a BUF_MEM structure which is
       extended as appropriate to accommodate the stored data.

       BIO_s_mem(3) except that the secure heap is used
       for buffer storage.

       BIO_s_dgram_mem() is a memory BIO that respects datagram semantics. A
       single call to BIO_write(3) will write a single datagram to the memory
       BIO. A subsequent call to BIO_read(3) will read the data in that
       datagram. The BIO_read(3) call will never return more data than was
       written in the original BIO_write(3) call even if there were subsequent
       BIO_write(3) calls that wrote more datagrams. Each successive call to
       BIO_read(3) will read the next datagram. If a BIO_read(3) call supplies
       a read buffer that is smaller than the size of the datagram, then the
       read buffer will be completely filled and the remaining data from the
       datagram will be discarded.

       It is not possible to write a zero length datagram. Calling
       BIO_write(3) in this case will return 0 and no datagrams will be
       written. Calling BIO_read(3) when there are no datagrams in the BIO to
       read will return a negative result and the "retry" flags will be set
       (i.e. calling BIO_should_retry(3) will return true). A datagram mem BIO
       will never return true from BIO_eof(3).

       Any data written to a memory BIO can be recalled by reading from it.
       Unless the memory BIO is read only any data read from it is deleted
       from the BIO.

       Memory BIOs except BIO_s_dgram_mem() support BIO_gets() and BIO_puts().

       BIO_s_dgram_mem() supports BIO_sendmmsg(3) and BIO_recvmmsg(3) calls
       and calls related to BIO_ADDR and MTU handling similarly to the
       BIO_s_dgram_pair(3).

       If the BIO_CLOSE flag is set when a memory BIO is freed then the
       underlying BUF_MEM structure is also freed.

       Calling BIO_reset() on a read write memory BIO clears any data in it if
       the flag BIO_FLAGS_NONCLEAR_RST is not set, otherwise it just restores
       the read pointer to the state it was just after the last write was
       performed and the data can be read again. On a read only BIO it
       similarly restores the BIO to its original state and the read only data
       can be read again.

       BIO_eof() is true if no data is in the BIO.

       BIO_ctrl_pending() returns the number of bytes currently stored.

       BIO_set_mem_eof_return() sets the behaviour of memory BIO b when it is
       empty. If the v is zero then an empty memory BIO will return EOF (that
       is it will return zero and BIO_should_retry(b) will be false. If v is
       non zero then it will return v when it is empty and it will set the
       read retry flag (that is BIO_read_retry(b) is true). To avoid ambiguity
       with a normal positive return value v should be set to a negative
       value, typically -1.  Calling this macro will fail for datagram mem
       BIOs.

       BIO_get_mem_data() sets *pp to a pointer to the start of the memory
       BIOs data and returns the total amount of data available. It is
       implemented as a macro.  Note the pointer returned by this call is
       informative, no transfer of ownership of this memory is implied.  See
       notes on BIO_set_close().

       BIO_set_mem_buf() sets the internal BUF_MEM structure to bm and sets
       the close flag to c, that is c should be either BIO_CLOSE or
       BIO_NOCLOSE. It is a macro.

       BIO_get_mem_ptr() places the underlying BUF_MEM structure in *pp. It is
       a macro.

       BIO_new_mem_buf() creates a memory BIO using len bytes of data at buf,
       if len is -1 then the buf is assumed to be nul terminated and its
       length is determined by strlen. The BIO is set to a read only state and
       as a result cannot be written to. This is useful when some data needs
       to be made available from a static area of memory in the form of a BIO.
       The supplied data is read directly from the supplied buffer: it is not
       copied first, so the supplied area of memory must be unchanged until
       the BIO is freed.

       All of the five functions described above return an error with
       BIO_s_dgram_mem().


NOTES

       Writes to memory BIOs will always succeed if memory is available: that
       is their size can grow indefinitely. An exception is BIO_s_dgram_mem()
       when BIO_set_write_buf_size(3) is called on it. In such case the write
       buffer size will be fixed and any writes that would overflow the buffer
       will return an error.

       Every write after partial read (not all data in the memory buffer was
       read) to a read write memory BIO will have to move the unread data with
       an internal copy operation, if a BIO contains a lot of data and it is
       read in small chunks intertwined with writes the operation can be very
       slow. Adding a buffering BIO to the chain can speed up the process.

       Calling BIO_set_mem_buf() on a secmem or dgram BIO will give undefined
       results, including perhaps a program crash.

       Switching a memory BIO from read write to read only is not supported
       and can give undefined results including a program crash. There are two
       notable exceptions to the rule. The first one is to assign a static
       memory buffer immediately after BIO creation and set the BIO as read
       only.

       The other supported sequence is to start with a read write BIO then
       temporarily switch it to read only and call BIO_reset() on the read
       only BIO immediately before switching it back to read write. Before the
       BIO is freed it must be switched back to the read write mode.

       Calling BIO_get_mem_ptr() on read only BIO will return a BUF_MEM that
       contains only the remaining data to be read. If the close status of the
       BIO is set to BIO_NOCLOSE, before freeing the BUF_MEM the data pointer
       in it must be set to NULL as the data pointer does not point to an
       allocated memory.

       Calling BIO_reset() on a read write memory BIO with
       BIO_FLAGS_NONCLEAR_RST flag set can have unexpected outcome when the
       reads and writes to the BIO are intertwined. As documented above the
       BIO will be reset to the state after the last completed write
       operation. The effects of reads preceding that write operation cannot
       be undone.

       Calling BIO_get_mem_ptr() prior to a BIO_reset() call with
       BIO_FLAGS_NONCLEAR_RST set has the same effect as a write operation.

       Calling BIO_set_close() with BIO_NOCLOSE orphans the BUF_MEM internal
       to the BIO, _not_ its actual data buffer. See the examples section for
       the proper method for claiming ownership of the data pointer for a
       deferred free operation.


RETURN VALUES

       BIO_s_mem(3), BIO_s_dgram_mem() and BIO_s_secmem() return a valid memory
       BIO_METHOD structure.

       BIO_set_mem_eof_return(), BIO_set_mem_buf() and BIO_get_mem_ptr()
       return 1 on success or a value which is less than or equal to 0 if an
       error occurred.

       BIO_get_mem_data() returns the total number of bytes available on
       success, 0 if b is NULL, or a negative value in case of other errors.

       BIO_new_mem_buf() returns a valid BIO structure on success or NULL on
       error.


EXAMPLES

       Create a memory BIO and write some data to it:

        BIO *mem = BIO_new(BIO_s_mem());

        BIO_puts(mem, "Hello World\n");

       Create a read only memory BIO:

        char data[] = "Hello World";
        BIO *mem = BIO_new_mem_buf(data, -1);

       Extract the BUF_MEM structure from a memory BIO and then free up the
       BIO:

        BUF_MEM *bptr;

        BIO_get_mem_ptr(mem, &bptr);
        BIO_set_close(mem, BIO_NOCLOSE); /* So BIO_free() leaves BUF_MEM alone */
        BIO_free(mem);

       Extract the BUF_MEM ptr, claim ownership of the internal data and free
       the BIO and BUF_MEM structure:

        BUF_MEM *bptr;
        char *data;

        BIO_get_mem_data(bio, &data);
        BIO_get_mem_ptr(bio, &bptr);
        BIO_set_close(mem, BIO_NOCLOSE); /* So BIO_free orphans BUF_MEM */
        BIO_free(bio);
        bptr->data = NULL; /* Tell BUF_MEM to orphan data */
        BUF_MEM_free(bptr);
        ...
        free(data);


COPYRIGHT

       Copyright 2000-2023 The OpenSSL Project Authors. All Rights Reserved.

       Licensed under the Apache License 2.0 (the "License").  You may not use
       this file except in compliance with the License.  You can obtain a copy
       in the file LICENSE in the source distribution or at
       <https://www.openssl.org/source/license.html>.

3.4.0                             2024-10-29                  BIO_S_MEM(3ossl)

openssl 3.4.0 - Generated Fri Nov 1 16:44:45 CDT 2024
© manpagez.com 2000-2024
Individual documents may contain additional copyright information.