Class::Accessor(3) User Contributed Perl Documentation Class::Accessor(3)
NAME
Class::Accessor - Automated accessor generation
SYNOPSIS
package Employee;
use base qw(Class::Accessor);
Employee->mk_accessors(qw(name role salary));
# Meanwhile, in a nearby piece of code!
# Class::Accessor provides new().
my $mp = Foo->new({ name => "Marty", role => "JAPH" });
my $job = $mp->role; # gets $mp->{role}
$mp->salary(400000); # sets $mp->{salary} = 400000 (I wish)
# like my @info = @{$mp}{qw(name role)}
my @info = $mp->get(qw(name role));
# $mp->{salary} = 400000
$mp->set('salary', 400000);
DESCRIPTION
This module automagically generates accessors/mutators for your class.
Most of the time, writing accessors is an exercise in cutting and
pasting. You usually wind up with a series of methods like this:
sub name {
my $self = shift;
if(@_) {
$self->{name} = $_[0];
}
return $self->{name};
}
sub salary {
my $self = shift;
if(@_) {
$self->{salary} = $_[0];
}
return $self->{salary};
}
# etc...
One for each piece of data in your object. While some will be unique,
doing value checks and special storage tricks, most will simply be
exercises in repetition. Not only is it Bad Style to have a bunch of
repetitious code, but its also simply not lazy, which is the real
tragedy.
If you make your module a subclass of Class::Accessor and declare your
accessor fields with mk_accessors() then you'll find yourself with a
set of automatically generated accessors which can even be customized!
The basic set up is very simple:
package My::Class;
use base qw(Class::Accessor);
My::Class->mk_accessors( qw(foo bar car) );
Done. My::Class now has simple foo(), bar() and car() accessors
defined.
What Makes This Different?
What makes this module special compared to all the other method
generating modules ("SEE ALSO")? By overriding the get() and set()
methods you can alter the behavior of the accessors class-wide. Also,
the accessors are implemented as closures which should cost a bit less
memory than most other solutions which generate a new method for each
accessor.
METHODS
new
my $obj = Class->new;
my $obj = $other_obj->new;
my $obj = Class->new(\%fields);
my $obj = $other_obj->new(\%fields);
Class::Accessor provides a basic constructor. It generates a hash-
based object and can be called as either a class method or an object
method.
It takes an optional %fields hash which is used to initialize the
object (handy if you use read-only accessors). The fields of the hash
correspond to the names of your accessors, so...
package Foo;
use base qw(Class::Accessor);
Foo->mk_accessors('foo');
my $obj = Class->new({ foo => 42 });
print $obj->foo; # 42
however %fields can contain anything, new() will shove them all into
your object. Don't like it? Override it.
mk_accessors
Class->mk_accessors(@fields);
This creates accessor/mutator methods for each named field given in
@fields. Foreach field in @fields it will generate two accessors. One
called "field()" and the other called "_field_accessor()". For
example:
# Generates foo(), _foo_accessor(), bar() and _bar_accessor().
Class->mk_accessors(qw(foo bar));
See "Overriding autogenerated accessors" in CAVEATS AND TRICKS for
details.
mk_ro_accessors
Class->mk_ro_accessors(@read_only_fields);
Same as mk_accessors() except it will generate read-only accessors (ie.
true accessors). If you attempt to set a value with these accessors it
will throw an exception. It only uses get() and not set().
package Foo;
use base qw(Class::Accessor);
Class->mk_ro_accessors(qw(foo bar));
# Let's assume we have an object $foo of class Foo...
print $foo->foo; # ok, prints whatever the value of $foo->{foo} is
$foo->foo(42); # BOOM! Naughty you.
mk_wo_accessors
Class->mk_wo_accessors(@write_only_fields);
Same as mk_accessors() except it will generate write-only accessors
(ie. mutators). If you attempt to read a value with these accessors it
will throw an exception. It only uses set() and not get().
NOTE I'm not entirely sure why this is useful, but I'm sure someone
will need it. If you've found a use, let me know. Right now its here
for orthoginality and because its easy to implement.
package Foo;
use base qw(Class::Accessor);
Class->mk_wo_accessors(qw(foo bar));
# Let's assume we have an object $foo of class Foo...
$foo->foo(42); # OK. Sets $self->{foo} = 42
print $foo->foo; # BOOM! Can't read from this accessor.
DETAILS
An accessor generated by Class::Accessor looks something like this:
# Your foo may vary.
sub foo {
my($self) = shift;
if(@_) { # set
return $self->set('foo', @_);
}
else {
return $self->get('foo');
}
}
Very simple. All it does is determine if you're wanting to set a value
or get a value and calls the appropriate method. Class::Accessor
provides default get() and set() methods which your class can override.
They're detailed later.
follow_best_practice
In Damian's Perl Best Practices book he recommends separate get and set
methods with the prefix set_ and get_ to make it explicit what you
intend to do. If you want to create those accessor methods instead of
the default ones, call:
__PACKAGE__->follow_best_practice
accessor_name_for / mutator_name_for
You may have your own crazy ideas for the names of the accessors, so
you can make those happen by overriding "accessor_name_for" and
"mutator_name_for" in your subclass. (I copied that idea from
Class::DBI.)
Modifying the behavior of the accessor
Rather than actually modifying the accessor itself, it is much more
sensible to simply override the two key methods which the accessor
calls. Namely set() and get().
If you -really- want to, you can override make_accessor().
set
$obj->set($key, $value);
$obj->set($key, @values);
set() defines how generally one stores data in the object.
override this method to change how data is stored by your accessors.
get
$value = $obj->get($key);
@values = $obj->get(@keys);
get() defines how data is retreived from your objects.
override this method to change how it is retreived.
make_accessor
$accessor = Class->make_accessor($field);
Generates a subroutine reference which acts as an accessor for the
given $field. It calls get() and set().
If you wish to change the behavior of your accessors, try overriding
get() and set() before you start mucking with make_accessor().
make_ro_accessor
$read_only_accessor = Class->make_ro_accessor($field);
Generates a subroutine refrence which acts as a read-only accessor for
the given $field. It only calls get().
Override get() to change the behavior of your accessors.
make_wo_accessor
$read_only_accessor = Class->make_wo_accessor($field);
Generates a subroutine refrence which acts as a write-only accessor
(mutator) for the given $field. It only calls set().
Override set() to change the behavior of your accessors.
EXCEPTIONS
If something goes wrong Class::Accessor will warn or die by calling
Carp::carp or Carp::croak. If you don't like this you can override
_carp() and _croak() in your subclass and do whatever else you want.
EFFICIENCY
Class::Accessor does not employ an autoloader, thus it is much faster
than you'd think. Its generated methods incur no special penalty over
ones you'd write yourself.
accessors:
Rate Basic Average Fast Faster Direct
Basic 189150/s -- -42% -51% -55% -89%
Average 327679/s 73% -- -16% -22% -82%
Fast 389212/s 106% 19% -- -8% -78%
Faster 421646/s 123% 29% 8% -- -76%
Direct 1771243/s 836% 441% 355% 320% --
mutators:
Rate Basic Average Fast Faster Direct
Basic 173769/s -- -34% -53% -59% -90%
Average 263046/s 51% -- -29% -38% -85%
Fast 371158/s 114% 41% -- -13% -78%
Faster 425821/s 145% 62% 15% -- -75%
Direct 1699081/s 878% 546% 358% 299% --
Class::Accessor::Fast is faster than methods written by an average
programmer (where "average" is based on Schwern's example code).
Class::Accessor is slower than average, but more flexible.
Class::Accessor::Faster is even faster than Class::Accessor::Fast. It
uses an array internally, not a hash. This could be a good or bad
feature depending on your point of view.
Direct hash access is, of course, much faster than all of these, but it
provides no encapsulation.
Of course, its not as simple as saying "Class::Accessor is slower than
average". These are benchmarks for a simple accessor. If your
accessors do any sort of complicated work (such as talking to a
database or writing to a file) the time spent doing that work will
quickly swamp the time spend just calling the accessor. In that case,
Class::Accessor and the ones you write will be roughly the same speed.
EXAMPLES
Here's an example of generating an accessor for every public field of
your class.
package Altoids;
use base qw(Class::Accessor Class::Fields);
use fields qw(curiously strong mints);
Altoids->mk_accessors( Altoids->show_fields('Public') );
sub new {
my $proto = shift;
my $class = ref $proto || $proto;
return fields::new($class);
}
my Altoids $tin = Altoids->new;
$tin->curiously('Curiouser and curiouser');
print $tin->{curiously}; # prints 'Curiouser and curiouser'
# Subclassing works, too.
package Mint::Snuff;
use base qw(Altoids);
my Mint::Snuff $pouch = Mint::Snuff->new;
$pouch->strong('Blow your head off!');
print $pouch->{strong}; # prints 'Blow your head off!'
Here's a simple example of altering the behavior of your accessors.
package Foo;
use base qw(Class::Accessor);
Foo->mk_accessor(qw(this that up down));
sub get {
my $self = shift;
# Note every time someone gets some data.
print STDERR "Getting @_\n";
$self->SUPER::get(@_);
}
sub set {
my ($self, $key) = splice(@_, 0, 2);
# Note every time someone sets some data.
print STDERR "Setting $key to @_\n";
$self->SUPER::set($key, @_);
}
CAVEATS AND TRICKS
Class::Accessor has to do some internal wackiness to get its job done
quickly and efficiently. Because of this, there's a few tricks and
traps one must know about.
Hey, nothing's perfect.
Don't make a field called DESTROY
This is bad. Since DESTROY is a magical method it would be bad for us
to define an accessor using that name. Class::Accessor will carp if
you try to use it with a field named "DESTROY".
Overriding autogenerated accessors
You may want to override the autogenerated accessor with your own, yet
have your custom accessor call the default one. For instance, maybe
you want to have an accessor which checks its input. Normally, one
would expect this to work:
package Foo;
use base qw(Class::Accessor);
Foo->mk_accessors(qw(email this that whatever));
# Only accept addresses which look valid.
sub email {
my($self) = shift;
my($email) = @_;
if( @_ ) { # Setting
require Email::Valid;
unless( Email::Valid->address($email) ) {
carp("$email doesn't look like a valid address.");
return;
}
}
return $self->SUPER::email(@_);
}
There's a subtle problem in the last example, and its in this line:
return $self->SUPER::email(@_);
If we look at how Foo was defined, it called mk_accessors() which stuck
email() right into Foo's namespace. There *is* no SUPER::email() to
delegate to! Two ways around this... first is to make a "pure" base
class for Foo. This pure class will generate the accessors and provide
the necessary super class for Foo to use:
package Pure::Organic::Foo;
use base qw(Class::Accessor);
Pure::Organic::Foo->mk_accessors(qw(email this that whatever));
package Foo;
use base qw(Pure::Organic::Foo);
And now Foo::email() can override the generated
Pure::Organic::Foo::email() and use it as SUPER::email().
This is probably the most obvious solution to everyone but me.
Instead, what first made sense to me was for mk_accessors() to define
an alias of email(), _email_accessor(). Using this solution,
Foo::email() would be written with:
return $self->_email_accessor(@_);
instead of the expected SUPER::email().
AUTHORS
Copyright 2007 Marty Pauley <marty+perl@kasei.com>
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself. That means either (a) the GNU
General Public License or (b) the Artistic License.
ORIGINAL AUTHOR
Michael G Schwern <schwern@pobox.com>
THANKS
Liz and RUZ for performance tweaks.
Tels, for his big feature request/bug report.
SEE ALSO
Class::Accessor::Fast(3)
These are some modules which do similar things in different ways
Class::Struct(3), Class::Methodmaker(3), Class::Generate(3), Class::Class(3),
Class::Contract(3)
Class::DBI(3) for an example of this module in use.
perl v5.10.0 2007-07-11 Class::Accessor(3)
Mac OS X 10.6 - Generated Thu Sep 17 20:11:12 CDT 2009