DBI(3) User Contributed Perl Documentation DBI(3)
NAME
DBI - Database independent interface for Perl
SYNOPSIS
use DBI;
@driver_names = DBI->available_drivers;
%drivers = DBI->installed_drivers;
@data_sources = DBI->data_sources($driver_name, \%attr);
$dbh = DBI->connect($data_source, $username, $auth, \%attr);
$rv = $dbh->do($statement);
$rv = $dbh->do($statement, \%attr);
$rv = $dbh->do($statement, \%attr, @bind_values);
$ary_ref = $dbh->selectall_arrayref($statement);
$hash_ref = $dbh->selectall_hashref($statement, $key_field);
$ary_ref = $dbh->selectcol_arrayref($statement);
$ary_ref = $dbh->selectcol_arrayref($statement, \%attr);
@row_ary = $dbh->selectrow_array($statement);
$ary_ref = $dbh->selectrow_arrayref($statement);
$hash_ref = $dbh->selectrow_hashref($statement);
$sth = $dbh->prepare($statement);
$sth = $dbh->prepare_cached($statement);
$rc = $sth->bind_param($p_num, $bind_value);
$rc = $sth->bind_param($p_num, $bind_value, $bind_type);
$rc = $sth->bind_param($p_num, $bind_value, \%attr);
$rv = $sth->execute;
$rv = $sth->execute(@bind_values);
$rv = $sth->execute_array(\%attr, ...);
$rc = $sth->bind_col($col_num, \$col_variable);
$rc = $sth->bind_columns(@list_of_refs_to_vars_to_bind);
@row_ary = $sth->fetchrow_array;
$ary_ref = $sth->fetchrow_arrayref;
$hash_ref = $sth->fetchrow_hashref;
$ary_ref = $sth->fetchall_arrayref;
$ary_ref = $sth->fetchall_arrayref( $slice, $max_rows );
$hash_ref = $sth->fetchall_hashref( $key_field );
$rv = $sth->rows;
$rc = $dbh->begin_work;
$rc = $dbh->commit;
$rc = $dbh->rollback;
$quoted_string = $dbh->quote($string);
$rc = $h->err;
$str = $h->errstr;
$rv = $h->state;
$rc = $dbh->disconnect;
The synopsis above only lists the major methods and parameters.
GETTING HELP
General
Before asking any questions, reread this document, consult the archives
and read the DBI FAQ. The archives are listed at the end of this
document and on the DBI home page <http://dbi.perl.org/support/>
You might also like to read the Advanced DBI Tutorial at
<http://www.slideshare.net/Tim.Bunce/dbi-advanced-tutorial-2007>
To help you make the best use of the dbi-users mailing list, and any
other lists or forums you may use, I recommend that you read "Getting
Answers" by Mike Ash: <http://mikeash.com/getting_answers.html>.
Mailing Lists
If you have questions about DBI, or DBD driver modules, you can get
help from the dbi-users@perl.org mailing list. This is the best way to
get help. You don't have to subscribe to the list in order to post,
though I'd recommend it. You can get help on subscribing and using the
list by emailing dbi-users-help@perl.org.
Please note that Tim Bunce does not maintain the mailing lists or the
web pages (generous volunteers do that). So please don't send mail
directly to him; he just doesn't have the time to answer questions
personally. The dbi-users mailing list has lots of experienced people
who should be able to help you if you need it. If you do email Tim he
is very likely to just forward it to the mailing list.
IRC
DBI IRC Channel: #dbi on irc.perl.org (<irc://irc.perl.org/#dbi>)
Online
StackOverflow has a DBI tag
<https://stackoverflow.com/questions/tagged/dbi> with over 800
questions.
The DBI home page at <https://dbi.perl.org/> might be worth a visit.
It includes links to other resources, but is rather out-dated.
Reporting a Bug
If you think you've found a bug then please read "How to Report Bugs
Effectively" by Simon Tatham:
<https://www.chiark.greenend.org.uk/~sgtatham/bugs.html>.
If you think you've found a memory leak then read "Memory Leaks".
Your problem is most likely related to the specific DBD driver module
you're using. If that's the case then click on the 'Bugs' link on the
<https://metacpan.org> page for your driver. Only submit a bug report
against the DBI itself if you're sure that your issue isn't related to
the driver you're using.
NOTES
This is the DBI specification that corresponds to DBI version 1.644
(see DBI::Changes for details).
The DBI is evolving at a steady pace, so it's good to check that you
have the latest copy.
The significant user-visible changes in each release are documented in
the DBI::Changes module so you can read them by executing "perldoc
DBI::Changes".
Some DBI changes require changes in the drivers, but the drivers can
take some time to catch up. Newer versions of the DBI have added
features that may not yet be supported by the drivers you use. Talk to
the authors of your drivers if you need a new feature that is not yet
supported.
Features added after DBI 1.21 (February 2002) are marked in the text
with the version number of the DBI release they first appeared in.
Extensions to the DBI API often use the "DBIx::*" namespace. See
"Naming Conventions and Name Space". DBI extension modules can be found
at <https://metacpan.org/search?q=DBIx>. And all modules related to
the DBI can be found at <https://metacpan.org/search?q=DBI>.
DESCRIPTION
The DBI is a database access module for the Perl programming language.
It defines a set of methods, variables, and conventions that provide a
consistent database interface, independent of the actual database being
used.
It is important to remember that the DBI is just an interface. The DBI
is a layer of "glue" between an application and one or more database
driver modules. It is the driver modules which do most of the real
work. The DBI provides a standard interface and framework for the
drivers to operate within.
This document often uses terms like references, objects, methods. If
you're not familiar with those terms then it would be a good idea to
read at least the following perl manuals first: perlreftut, perldsc,
perllol, and perlboot.
Architecture of a DBI Application
|<- Scope of DBI ->|
.-. .--------------. .-------------.
.-------. | |---| XYZ Driver |---| XYZ Engine |
| Perl | | | `--------------' `-------------'
| script| |A| |D| .--------------. .-------------.
| using |--|P|--|B|---|Oracle Driver |---|Oracle Engine|
| DBI | |I| |I| `--------------' `-------------'
| API | | |...
|methods| | |... Other drivers
`-------' | |...
`-'
The API, or Application Programming Interface, defines the call
interface and variables for Perl scripts to use. The API is implemented
by the Perl DBI extension.
The DBI "dispatches" the method calls to the appropriate driver for
actual execution. The DBI is also responsible for the dynamic loading
of drivers, error checking and handling, providing default
implementations for methods, and many other non-database specific
duties.
Each driver contains implementations of the DBI methods using the
private interface functions of the corresponding database engine. Only
authors of sophisticated/multi-database applications or generic library
functions need be concerned with drivers.
Notation and Conventions
The following conventions are used in this document:
$dbh Database handle object
$sth Statement handle object
$drh Driver handle object (rarely seen or used in applications)
$h Any of the handle types above ($dbh, $sth, or $drh)
$rc General Return Code (boolean: true=ok, false=error)
$rv General Return Value (typically an integer)
@ary List of values returned from the database, typically a row of data
$rows Number of rows processed (if available, else -1)
$fh A filehandle
undef NULL values are represented by undefined values in Perl
\%attr Reference to a hash of attribute values passed to methods
Note that Perl will automatically destroy database and statement handle
objects if all references to them are deleted.
Outline Usage
To use DBI, first you need to load the DBI module:
use DBI;
use strict;
(The "use strict;" isn't required but is strongly recommended.)
Then you need to "connect" to your data source and get a handle for
that connection:
$dbh = DBI->connect($dsn, $user, $password,
{ RaiseError => 1, AutoCommit => 0 });
Since connecting can be expensive, you generally just connect at the
start of your program and disconnect at the end.
Explicitly defining the required "AutoCommit" behaviour is strongly
recommended and may become mandatory in a later version. This
determines whether changes are automatically committed to the database
when executed, or need to be explicitly committed later.
The DBI allows an application to "prepare" statements for later
execution. A prepared statement is identified by a statement handle
held in a Perl variable. We'll call the Perl variable $sth in our
examples.
The typical method call sequence for a "SELECT" statement is:
prepare,
execute, fetch, fetch, ...
execute, fetch, fetch, ...
execute, fetch, fetch, ...
for example:
$sth = $dbh->prepare("SELECT foo, bar FROM table WHERE baz=?");
$sth->execute( $baz );
while ( @row = $sth->fetchrow_array ) {
print "@row\n";
}
For queries that are not executed many times at once, it is often
cleaner to use the higher level select wrappers:
$row_hashref = $dbh->selectrow_hashref("SELECT foo, bar FROM table WHERE baz=?", undef, $baz);
$arrayref_of_row_hashrefs = $dbh->selectall_arrayref(
"SELECT foo, bar FROM table WHERE baz BETWEEN ? AND ?",
{ Slice => {} }, $baz_min, $baz_max);
The typical method call sequence for a non-"SELECT" statement is:
prepare,
execute,
execute,
execute.
for example:
$sth = $dbh->prepare("INSERT INTO table(foo,bar,baz) VALUES (?,?,?)");
while(<CSV>) {
chomp;
my ($foo,$bar,$baz) = split /,/;
$sth->execute( $foo, $bar, $baz );
}
The "do()" method is a wrapper of prepare and execute that can be
simpler for non repeated non-"SELECT" statements (or with drivers that
don't support placeholders):
$rows_affected = $dbh->do("UPDATE your_table SET foo = foo + 1");
$rows_affected = $dbh->do("DELETE FROM table WHERE foo = ?", undef, $foo);
To commit your changes to the database (when "AutoCommit" is off):
$dbh->commit; # or call $dbh->rollback; to undo changes
Finally, when you have finished working with the data source, you
should "disconnect" from it:
$dbh->disconnect;
General Interface Rules & Caveats
The DBI does not have a concept of a "current session". Every session
has a handle object (i.e., a $dbh) returned from the "connect" method.
That handle object is used to invoke database related methods.
Most data is returned to the Perl script as strings. (Null values are
returned as "undef".) This allows arbitrary precision numeric data to
be handled without loss of accuracy. Beware that Perl may not preserve
the same accuracy when the string is used as a number.
Dates and times are returned as character strings in the current
default format of the corresponding database engine. Time zone effects
are database/driver dependent.
Perl supports binary data in Perl strings, and the DBI will pass binary
data to and from the driver without change. It is up to the driver
implementors to decide how they wish to handle such binary data.
Perl supports two kinds of strings: Unicode (utf8 internally) and non-
Unicode (defaults to iso-8859-1 if forced to assume an encoding).
Drivers should accept both kinds of strings and, if required, convert
them to the character set of the database being used. Similarly, when
fetching from the database character data that isn't iso-8859-1 the
driver should convert it into utf8.
Multiple SQL statements may not be combined in a single statement
handle ($sth), although some databases and drivers do support this
(notably Sybase and SQL Server).
Non-sequential record reads are not supported in this version of the
DBI. In other words, records can only be fetched in the order that the
database returned them, and once fetched they are forgotten.
Positioned updates and deletes are not directly supported by the DBI.
See the description of the "CursorName" attribute for an alternative.
Individual driver implementors are free to provide any private
functions and/or handle attributes that they feel are useful. Private
driver functions can be invoked using the DBI "func()" method. Private
driver attributes are accessed just like standard attributes.
Many methods have an optional "\%attr" parameter which can be used to
pass information to the driver implementing the method. Except where
specifically documented, the "\%attr" parameter can only be used to
pass driver specific hints. In general, you can ignore "\%attr"
parameters or pass it as "undef".
Naming Conventions and Name Space
The DBI package and all packages below it ("DBI::*") are reserved for
use by the DBI. Extensions and related modules use the "DBIx::"
namespace (see <http://www.perl.com/CPAN/modules/by-module/DBIx/>).
Package names beginning with "DBD::" are reserved for use by DBI
database drivers. All environment variables used by the DBI or by
individual DBDs begin with ""DBI_"" or ""DBD_"".
The letter case used for attribute names is significant and plays an
important part in the portability of DBI scripts. The case of the
attribute name is used to signify who defined the meaning of that name
and its values.
Case of name Has a meaning defined by
------------ ------------------------
UPPER_CASE Standards, e.g., X/Open, ISO SQL92 etc (portable)
MixedCase DBI API (portable), underscores are not used.
lower_case Driver or database engine specific (non-portable)
It is of the utmost importance that Driver developers only use
lowercase attribute names when defining private attributes. Private
attribute names must be prefixed with the driver name or suitable
abbreviation (e.g., ""ora_"" for Oracle, ""ing_"" for Ingres, etc).
SQL - A Query Language
Most DBI drivers require applications to use a dialect of SQL
(Structured Query Language) to interact with the database engine. The
"Standards Reference Information" section provides links to useful
information about SQL.
The DBI itself does not mandate or require any particular language to
be used; it is language independent. In ODBC terms, the DBI is in
"pass-thru" mode, although individual drivers might not be. The only
requirement is that queries and other statements must be expressed as a
single string of characters passed as the first argument to the
"prepare" or "do" methods.
For an interesting diversion on the real history of RDBMS and SQL, from
the people who made it happen, see:
http://www.mcjones.org/System_R/SQL_Reunion_95/sqlr95.html
Follow the "Full Contents" then "Intergalactic dataspeak" links for the
SQL history.
Placeholders and Bind Values
Some drivers support placeholders and bind values. Placeholders, also
called parameter markers, are used to indicate values in a database
statement that will be supplied later, before the prepared statement is
executed. For example, an application might use the following to
insert a row of data into the SALES table:
INSERT INTO sales (product_code, qty, price) VALUES (?, ?, ?)
or the following, to select the description for a product:
SELECT description FROM products WHERE product_code = ?
The "?" characters are the placeholders. The association of actual
values with placeholders is known as binding, and the values are
referred to as bind values. Note that the "?" is not enclosed in
quotation marks, even when the placeholder represents a string.
Some drivers also allow placeholders like ":"name and ":"N (e.g., ":1",
":2", and so on) in addition to "?", but their use is not portable.
If the ":"N form of placeholder is supported by the driver you're
using, then you should be able to use either "bind_param" or "execute"
to bind values. Check your driver documentation.
Some drivers allow you to prevent the recognition of a placeholder by
placing a single backslash character ("\") immediately before it. The
driver will remove the backslash character and ignore the placeholder,
passing it unchanged to the backend. If the driver supports this then
"get_info"(9000) will return true.
With most drivers, placeholders can't be used for any element of a
statement that would prevent the database server from validating the
statement and creating a query execution plan for it. For example:
"SELECT name, age FROM ?" # wrong (will probably fail)
"SELECT name, ? FROM people" # wrong (but may not 'fail')
Also, placeholders can only represent single scalar values. For
example, the following statement won't work as expected for more than
one value:
"SELECT name, age FROM people WHERE name IN (?)" # wrong
"SELECT name, age FROM people WHERE name IN (?,?)" # two names
When using placeholders with the SQL "LIKE" qualifier, you must
remember that the placeholder substitutes for the whole string. So you
should use ""... LIKE ? ..."" and include any wildcard characters in
the value that you bind to the placeholder.
NULL Values
Undefined values, or "undef", are used to indicate NULL values. You
can insert and update columns with a NULL value as you would a non-NULL
value. These examples insert and update the column "age" with a NULL
value:
$sth = $dbh->prepare(qq{
INSERT INTO people (fullname, age) VALUES (?, ?)
});
$sth->execute("Joe Bloggs", undef);
$sth = $dbh->prepare(qq{
UPDATE people SET age = ? WHERE fullname = ?
});
$sth->execute(undef, "Joe Bloggs");
However, care must be taken when trying to use NULL values in a "WHERE"
clause. Consider:
SELECT fullname FROM people WHERE age = ?
Binding an "undef" (NULL) to the placeholder will not select rows which
have a NULL "age"! At least for database engines that conform to the
SQL standard. Refer to the SQL manual for your database engine or any
SQL book for the reasons for this. To explicitly select NULLs you have
to say ""WHERE age IS NULL"".
A common issue is to have a code fragment handle a value that could be
either "defined" or "undef" (non-NULL or NULL) at runtime. A simple
technique is to prepare the appropriate statement as needed, and
substitute the placeholder for non-NULL cases:
$sql_clause = defined $age? "age = ?" : "age IS NULL";
$sth = $dbh->prepare(qq{
SELECT fullname FROM people WHERE $sql_clause
});
$sth->execute(defined $age ? $age : ());
The following technique illustrates qualifying a "WHERE" clause with
several columns, whose associated values ("defined" or "undef") are in
a hash %h:
for my $col ("age", "phone", "email") {
if (defined $h{$col}) {
push @sql_qual, "$col = ?";
push @sql_bind, $h{$col};
}
else {
push @sql_qual, "$col IS NULL";
}
}
$sql_clause = join(" AND ", @sql_qual);
$sth = $dbh->prepare(qq{
SELECT fullname FROM people WHERE $sql_clause
});
$sth->execute(@sql_bind);
The techniques above call prepare for the SQL statement with each call
to execute. Because calls to prepare() can be expensive, performance
can suffer when an application iterates many times over statements like
the above.
A better solution is a single "WHERE" clause that supports both NULL
and non-NULL comparisons. Its SQL statement would need to be prepared
only once for all cases, thus improving performance. Several examples
of "WHERE" clauses that support this are presented below. But each
example lacks portability, robustness, or simplicity. Whether an
example is supported on your database engine depends on what SQL
extensions it provides, and where it supports the "?" placeholder in a
statement.
0) age = ?
1) NVL(age, xx) = NVL(?, xx)
2) ISNULL(age, xx) = ISNULL(?, xx)
3) DECODE(age, ?, 1, 0) = 1
4) age = ? OR (age IS NULL AND ? IS NULL)
5) age = ? OR (age IS NULL AND SP_ISNULL(?) = 1)
6) age = ? OR (age IS NULL AND ? = 1)
Statements formed with the above "WHERE" clauses require execute
statements as follows. The arguments are required, whether their
values are "defined" or "undef".
0,1,2,3) $sth->execute($age);
4,5) $sth->execute($age, $age);
6) $sth->execute($age, defined($age) ? 0 : 1);
Example 0 should not work (as mentioned earlier), but may work on a few
database engines anyway (e.g. Sybase). Example 0 is part of examples
4, 5, and 6, so if example 0 works, these other examples may work, even
if the engine does not properly support the right hand side of the "OR"
expression.
Examples 1 and 2 are not robust: they require that you provide a valid
column value xx (e.g. '~') which is not present in any row. That means
you must have some notion of what data won't be stored in the column,
and expect clients to adhere to that.
Example 5 requires that you provide a stored procedure (SP_ISNULL in
this example) that acts as a function: it checks whether a value is
null, and returns 1 if it is, or 0 if not.
Example 6, the least simple, is probably the most portable, i.e., it
should work with most, if not all, database engines.
Here is a table that indicates which examples above are known to work
on various database engines:
-----Examples------
0 1 2 3 4 5 6
- - - - - - -
Oracle 9 N Y N Y Y ? Y
Informix IDS 9 N N N Y N Y Y
MS SQL N N Y N Y ? Y
Sybase Y N N N N N Y
AnyData,DBM,CSV Y N N N Y Y* Y
SQLite 3.3 N N N N Y N N
MSAccess N N N N Y N Y
* Works only because Example 0 works.
DBI provides a sample perl script that will test the examples above on
your database engine and tell you which ones work. It is located in
the ex/ subdirectory of the DBI source distribution, or here:
<https://github.com/perl5-dbi/dbi/blob/master/ex/perl_dbi_nulls_test.pl>
Please use the script to help us fill-in and maintain this table.
Performance
Without using placeholders, the insert statement shown previously would
have to contain the literal values to be inserted and would have to be
re-prepared and re-executed for each row. With placeholders, the insert
statement only needs to be prepared once. The bind values for each row
can be given to the "execute" method each time it's called. By avoiding
the need to re-prepare the statement for each row, the application
typically runs many times faster. Here's an example:
my $sth = $dbh->prepare(q{
INSERT INTO sales (product_code, qty, price) VALUES (?, ?, ?)
}) or die $dbh->errstr;
while (<>) {
chomp;
my ($product_code, $qty, $price) = split /,/;
$sth->execute($product_code, $qty, $price) or die $dbh->errstr;
}
$dbh->commit or die $dbh->errstr;
See "execute" and "bind_param" for more details.
The "q{...}" style quoting used in this example avoids clashing with
quotes that may be used in the SQL statement. Use the double-quote like
"qq{...}" operator if you want to interpolate variables into the
string. See "Quote and Quote-like Operators" in perlop for more
details.
See also the "bind_columns" method, which is used to associate Perl
variables with the output columns of a "SELECT" statement.
THE DBI PACKAGE AND CLASS
In this section, we cover the DBI class methods, utility functions, and
the dynamic attributes associated with generic DBI handles.
DBI Constants
Constants representing the values of the SQL standard types can be
imported individually by name, or all together by importing the special
":sql_types" tag.
The names and values of all the defined SQL standard types can be
produced like this:
foreach (@{ $DBI::EXPORT_TAGS{sql_types} }) {
printf "%s=%d\n", $_, &{"DBI::$_"};
}
These constants are defined by SQL/CLI, ODBC or both. "SQL_BIGINT" has
conflicting codes in SQL/CLI and ODBC, DBI uses the ODBC one.
See the "type_info", "type_info_all", and "bind_param" methods for
possible uses.
Note that just because the DBI defines a named constant for a given
data type doesn't mean that drivers will support that data type.
DBI Class Methods
The following methods are provided by the DBI class:
"parse_dsn"
($scheme, $driver, $attr_string, $attr_hash, $driver_dsn) = DBI->parse_dsn($dsn)
or die "Can't parse DBI DSN '$dsn'";
Breaks apart a DBI Data Source Name (DSN) and returns the individual
parts. If $dsn doesn't contain a valid DSN then parse_dsn() returns an
empty list.
$scheme is the first part of the DSN and is currently always 'dbi'.
$driver is the driver name, possibly defaulted to $ENV{DBI_DRIVER}, and
may be undefined. $attr_string is the contents of the optional
attribute string, which may be undefined. If $attr_string is not empty
then $attr_hash is a reference to a hash containing the parsed
attribute names and values. $driver_dsn is the last part of the DBI
DSN string. For example:
($scheme, $driver, $attr_string, $attr_hash, $driver_dsn)
= DBI->parse_dsn("dbi:MyDriver(RaiseError=>1):db=test;port=42");
$scheme = 'dbi';
$driver = 'MyDriver';
$attr_string = 'RaiseError=>1';
$attr_hash = { 'RaiseError' => '1' };
$driver_dsn = 'db=test;port=42';
The parse_dsn() method was added in DBI 1.43.
"connect"
$dbh = DBI->connect($data_source, $username, $password)
or die $DBI::errstr;
$dbh = DBI->connect($data_source, $username, $password, \%attr)
or die $DBI::errstr;
Establishes a database connection, or session, to the requested
$data_source. Returns a database handle object if the connection
succeeds. Use "$dbh->disconnect" to terminate the connection.
If the connect fails (see below), it returns "undef" and sets both
$DBI::err and $DBI::errstr. (It does not explicitly set $!.) You should
generally test the return status of "connect" and "print $DBI::errstr"
if it has failed.
Multiple simultaneous connections to multiple databases through
multiple drivers can be made via the DBI. Simply make one "connect"
call for each database and keep a copy of each returned database
handle.
The $data_source value must begin with ""dbi:"driver_name":"". The
driver_name specifies the driver that will be used to make the
connection. (Letter case is significant.)
As a convenience, if the $data_source parameter is undefined or empty,
the DBI will substitute the value of the environment variable
"DBI_DSN". If just the driver_name part is empty (i.e., the
$data_source prefix is ""dbi::""), the environment variable
"DBI_DRIVER" is used. If neither variable is set, then "connect" dies.
Examples of $data_source values are:
dbi:DriverName:database_name
dbi:DriverName:database_name@hostname:port
dbi:DriverName:database=database_name;host=hostname;port=port
There is no standard for the text following the driver name. Each
driver is free to use whatever syntax it wants. The only requirement
the DBI makes is that all the information is supplied in a single
string. You must consult the documentation for the drivers you are
using for a description of the syntax they require.
It is recommended that drivers support the ODBC style, shown in the
last example above. It is also recommended that they support the three
common names '"host"', '"port"', and '"database"' (plus '"db"' as an
alias for "database"). This simplifies automatic construction of basic
DSNs: "dbi:$driver:database=$db;host=$host;port=$port". Drivers should
aim to 'do something reasonable' when given a DSN in this form, but if
any part is meaningless for that driver (such as 'port' for Informix)
it should generate an error if that part is not empty.
If the environment variable "DBI_AUTOPROXY" is defined (and the driver
in $data_source is not ""Proxy"") then the connect request will
automatically be changed to:
$ENV{DBI_AUTOPROXY};dsn=$data_source
"DBI_AUTOPROXY" is typically set as
""dbi:Proxy:hostname=...;port=..."". If $ENV{DBI_AUTOPROXY} doesn't
begin with '"dbi:"' then "dbi:Proxy:" will be prepended to it first.
See the DBD::Proxy documentation for more details.
If $username or $password are undefined (rather than just empty), then
the DBI will substitute the values of the "DBI_USER" and "DBI_PASS"
environment variables, respectively. The DBI will warn if the
environment variables are not defined. However, the everyday use of
these environment variables is not recommended for security reasons.
The mechanism is primarily intended to simplify testing. See below for
alternative way to specify the username and password.
"DBI->connect" automatically installs the driver if it has not been
installed yet. Driver installation either returns a valid driver
handle, or it dies with an error message that includes the string
""install_driver"" and the underlying problem. So "DBI->connect" will
die on a driver installation failure and will only return "undef" on a
connect failure, in which case $DBI::errstr will hold the error
message. Use "eval" if you need to catch the ""install_driver"" error.
The $data_source argument (with the ""dbi:...:"" prefix removed) and
the $username and $password arguments are then passed to the driver for
processing. The DBI does not define any interpretation for the contents
of these fields. The driver is free to interpret the $data_source,
$username, and $password fields in any way, and supply whatever
defaults are appropriate for the engine being accessed. (Oracle, for
example, uses the ORACLE_SID and TWO_TASK environment variables if no
$data_source is specified.)
The "AutoCommit" and "PrintError" attributes for each connection
default to "on". (See "AutoCommit" and "PrintError" for more
information.) However, it is strongly recommended that you explicitly
define "AutoCommit" rather than rely on the default. The "PrintWarn"
attribute defaults to true. The "RaiseWarn" attribute defaults to
false.
The "\%attr" parameter can be used to alter the default settings of
"PrintError", "RaiseError", "AutoCommit", and other attributes. For
example:
$dbh = DBI->connect($data_source, $user, $pass, {
PrintError => 0,
AutoCommit => 0
});
The username and password can also be specified using the attributes
"Username" and "Password", in which case they take precedence over the
$username and $password parameters.
You can also define connection attribute values within the $data_source
parameter. For example:
dbi:DriverName(PrintWarn=>0,PrintError=>0,Taint=>1):...
Individual attributes values specified in this way take precedence over
any conflicting values specified via the "\%attr" parameter to
"connect".
The "dbi_connect_method" attribute can be used to specify which driver
method should be called to establish the connection. The only useful
values are 'connect', 'connect_cached', or some specialized case like
'Apache::DBI::connect' (which is automatically the default when running
within Apache).
Where possible, each session ($dbh) is independent from the
transactions in other sessions. This is useful when you need to hold
cursors open across transactions--for example, if you use one session
for your long lifespan cursors (typically read-only) and another for
your short update transactions.
For compatibility with old DBI scripts, the driver can be specified by
passing its name as the fourth argument to "connect" (instead of
"\%attr"):
$dbh = DBI->connect($data_source, $user, $pass, $driver);
In this "old-style" form of "connect", the $data_source should not
start with ""dbi:driver_name:"". (If it does, the embedded driver_name
will be ignored). Also note that in this older form of "connect", the
"$dbh->{AutoCommit}" attribute is undefined, the "$dbh->{PrintError}"
attribute is off, and the old "DBI_DBNAME" environment variable is
checked if "DBI_DSN" is not defined. Beware that this "old-style"
"connect" will soon be withdrawn in a future version of DBI.
"connect_cached"
$dbh = DBI->connect_cached($data_source, $username, $password)
or die $DBI::errstr;
$dbh = DBI->connect_cached($data_source, $username, $password, \%attr)
or die $DBI::errstr;
"connect_cached" is like "connect", except that the database handle
returned is also stored in a hash associated with the given parameters.
If another call is made to "connect_cached" with the same parameter
values, then the corresponding cached $dbh will be returned if it is
still valid. The cached database handle is replaced with a new
connection if it has been disconnected or if the "ping" method fails.
Note that the behaviour of this method differs in several respects from
the behaviour of persistent connections implemented by Apache::DBI.
However, if Apache::DBI is loaded then "connect_cached" will use it.
Caching connections can be useful in some applications, but it can also
cause problems, such as too many connections, and so should be used
with care. In particular, avoid changing the attributes of a database
handle created via connect_cached() because it will affect other code
that may be using the same handle. When connect_cached() returns a
handle the attributes will be reset to their initial values. This can
cause problems, especially with the "AutoCommit" attribute.
Also, to ensure that the attributes passed are always the same, avoid
passing references inline. For example, the "Callbacks" attribute is
specified as a hash reference. Be sure to declare it external to the
call to connect_cached(), such that the hash reference is not re-
created on every call. A package-level lexical works well:
package MyDBH;
my $cb = {
'connect_cached.reused' => sub { delete $_[4]->{AutoCommit} },
};
sub dbh {
DBI->connect_cached( $dsn, $username, $auth, { Callbacks => $cb });
}
Where multiple separate parts of a program are using connect_cached()
to connect to the same database with the same (initial) attributes it
is a good idea to add a private attribute to the connect_cached() call
to effectively limit the scope of the caching. For example:
DBI->connect_cached(..., { private_foo_cachekey => "Bar", ... });
Handles returned from that connect_cached() call will only be returned
by other connect_cached() call elsewhere in the code if those other
calls also pass in the same attribute values, including the private
one. (I've used "private_foo_cachekey" here as an example, you can use
any attribute name with a "private_" prefix.)
Taking that one step further, you can limit a particular
connect_cached() call to return handles unique to that one place in the
code by setting the private attribute to a unique value for that place:
DBI->connect_cached(..., { private_foo_cachekey => __FILE__.__LINE__, ... });
By using a private attribute you still get connection caching for the
individual calls to connect_cached() but, by making separate database
connections for separate parts of the code, the database handles are
isolated from any attribute changes made to other handles.
The cache can be accessed (and cleared) via the "CachedKids" attribute:
my $CachedKids_hashref = $dbh->{Driver}->{CachedKids};
%$CachedKids_hashref = () if $CachedKids_hashref;
"available_drivers"
@ary = DBI->available_drivers;
@ary = DBI->available_drivers($quiet);
Returns a list of all available drivers by searching for "DBD::*"
modules through the directories in @INC. By default, a warning is given
if some drivers are hidden by others of the same name in earlier
directories. Passing a true value for $quiet will inhibit the warning.
"installed_drivers"
%drivers = DBI->installed_drivers();
Returns a list of driver name and driver handle pairs for all drivers
'installed' (loaded) into the current process. The driver name does
not include the 'DBD::' prefix.
To get a list of all drivers available in your perl installation you
can use "available_drivers".
Added in DBI 1.49.
"installed_versions"
DBI->installed_versions;
@ary = DBI->installed_versions;
$hash = DBI->installed_versions;
Calls available_drivers() and attempts to load each of them in turn
using install_driver(). For each load that succeeds the driver name
and version number are added to a hash. When running under
DBI::PurePerl drivers which appear not be pure-perl are ignored.
When called in array context the list of successfully loaded drivers is
returned (without the 'DBD::' prefix).
When called in scalar context an extra entry for the "DBI" is added
(and "DBI::PurePerl" if appropriate) and a reference to the hash is
returned.
When called in a void context the installed_versions() method will
print out a formatted list of the hash contents, one per line, along
with some other information about the DBI version and OS.
Due to the potentially high memory cost and unknown risks of loading in
an unknown number of drivers that just happen to be installed on the
system, this method is not recommended for general use. Use
available_drivers() instead.
The installed_versions() method is primarily intended as a quick way to
see from the command line what's installed. For example:
perl -MDBI -e 'DBI->installed_versions'
The installed_versions() method was added in DBI 1.38.
"data_sources"
@ary = DBI->data_sources($driver);
@ary = DBI->data_sources($driver, \%attr);
Returns a list of data sources (databases) available via the named
driver. If $driver is empty or "undef", then the value of the
"DBI_DRIVER" environment variable is used.
The driver will be loaded if it hasn't been already. Note that if the
driver loading fails then data_sources() dies with an error message
that includes the string ""install_driver"" and the underlying problem.
Data sources are returned in a form suitable for passing to the
"connect" method (that is, they will include the ""dbi:$driver:""
prefix).
Note that many drivers have no way of knowing what data sources might
be available for it. These drivers return an empty or incomplete list
or may require driver-specific attributes.
There is also a data_sources() method defined for database handles.
"trace"
DBI->trace($trace_setting)
DBI->trace($trace_setting, $trace_filename)
DBI->trace($trace_setting, $trace_filehandle)
$trace_setting = DBI->trace;
The "DBI->trace" method sets the global default trace settings and
returns the previous trace settings. It can also be used to change
where the trace output is sent.
There's a similar method, "$h->trace", which sets the trace settings
for the specific handle it's called on.
See the "TRACING" section for full details about the DBI's powerful
tracing facilities.
"visit_handles"
DBI->visit_handles( $coderef );
DBI->visit_handles( $coderef, $info );
Where $coderef is a reference to a subroutine and $info is an arbitrary
value which, if undefined, defaults to a reference to an empty hash.
Returns $info.
For each installed driver handle, if any, $coderef is invoked as:
$coderef->($driver_handle, $info);
If the execution of $coderef returns a true value then
"visit_child_handles" is called on that child handle and passed the
returned value as $info.
For example:
my $info = $dbh->{Driver}->visit_child_handles(sub {
my ($h, $info) = @_;
++$info->{ $h->{Type} }; # count types of handles (dr/db/st)
return $info; # visit kids
});
See also "visit_child_handles".
DBI Utility Functions
In addition to the DBI methods listed in the previous section, the DBI
package also provides several utility functions.
These can be imported into your code by listing them in the "use"
statement. For example:
use DBI qw(neat data_diff);
Alternatively, all these utility functions (except hash) can be
imported using the ":utils" import tag. For example:
use DBI qw(:utils);
"data_string_desc"
$description = data_string_desc($string);
Returns an informal description of the string. For example:
UTF8 off, ASCII, 42 characters 42 bytes
UTF8 off, non-ASCII, 42 characters 42 bytes
UTF8 on, non-ASCII, 4 characters 6 bytes
UTF8 on but INVALID encoding, non-ASCII, 4 characters 6 bytes
UTF8 off, undef
The initial "UTF8" on/off refers to Perl's internal SvUTF8 flag. If
$string has the SvUTF8 flag set but the sequence of bytes it contains
are not a valid UTF-8 encoding then data_string_desc() will report
"UTF8 on but INVALID encoding".
The "ASCII" vs "non-ASCII" portion shows "ASCII" if all the characters
in the string are ASCII (have code points <= 127).
The data_string_desc() function was added in DBI 1.46.
"data_string_diff"
$diff = data_string_diff($a, $b);
Returns an informal description of the first character difference
between the strings. If both $a and $b contain the same sequence of
characters then data_string_diff() returns an empty string. For
example:
Params a & b Result
------------ ------
'aaa', 'aaa' ''
'aaa', 'abc' 'Strings differ at index 2: a[2]=a, b[2]=b'
'aaa', undef 'String b is undef, string a has 3 characters'
'aaa', 'aa' 'String b truncated after 2 characters'
Unicode characters are reported in "\x{XXXX}" format. Unicode code
points in the range U+0800 to U+08FF are unassigned and most likely to
occur due to double-encoding. Characters in this range are reported as
"\x{08XX}='C'" where "C" is the corresponding latin-1 character.
The data_string_diff() function only considers logical characters and
not the underlying encoding. See "data_diff" for an alternative.
The data_string_diff() function was added in DBI 1.46.
"data_diff"
$diff = data_diff($a, $b);
$diff = data_diff($a, $b, $logical);
Returns an informal description of the difference between two strings.
It calls "data_string_desc" and "data_string_diff" and returns the
combined results as a multi-line string.
For example, "data_diff("abc", "ab\x{263a}")" will return:
a: UTF8 off, ASCII, 3 characters 3 bytes
b: UTF8 on, non-ASCII, 3 characters 5 bytes
Strings differ at index 2: a[2]=c, b[2]=\x{263A}
If $a and $b are identical in both the characters they contain and
their physical encoding then data_diff() returns an empty string. If
$logical is true then physical encoding differences are ignored (but
are still reported if there is a difference in the characters).
The data_diff() function was added in DBI 1.46.
"neat"
$str = neat($value);
$str = neat($value, $maxlen);
Return a string containing a neat (and tidy) representation of the
supplied value.
Strings will be quoted, although internal quotes will not be escaped.
Values known to be numeric will be unquoted. Undefined (NULL) values
will be shown as "undef" (without quotes).
If the string is flagged internally as utf8 then double quotes will be
used, otherwise single quotes are used and unprintable characters will
be replaced by dot (.).
For result strings longer than $maxlen the result string will be
truncated to "$maxlen-4" and ""...'"" will be appended. If $maxlen is
0 or "undef", it defaults to $DBI::neat_maxlen which, in turn, defaults
to 400.
This function is designed to format values for human consumption. It
is used internally by the DBI for "trace" output. It should typically
not be used for formatting values for database use. (See also
"quote".)
"neat_list"
$str = neat_list(\@listref, $maxlen, $field_sep);
Calls "neat" on each element of the list and returns a string
containing the results joined with $field_sep. $field_sep defaults to
", ".
"looks_like_number"
@bool = looks_like_number(@array);
Returns true for each element that looks like a number. Returns false
for each element that does not look like a number. Returns "undef" for
each element that is undefined or empty.
"hash"
$hash_value = DBI::hash($buffer, $type);
Return a 32-bit integer 'hash' value corresponding to the contents of
$buffer. The $type parameter selects which kind of hash algorithm
should be used.
For the technically curious, type 0 (which is the default if $type
isn't specified) is based on the Perl 5.1 hash except that the value is
forced to be negative (for obscure historical reasons). Type 1 is the
better "Fowler / Noll / Vo" (FNV) hash. See
<http://www.isthe.com/chongo/tech/comp/fnv/> for more information.
Both types are implemented in C and are very fast.
This function doesn't have much to do with databases, except that it
can sometimes be handy to store such values in a database. It also
doesn't have much to do with perl hashes, like %foo.
"sql_type_cast"
$sts = DBI::sql_type_cast($sv, $sql_type, $flags);
sql_type_cast attempts to cast $sv to the SQL type (see DBI Constants)
specified in $sql_type. At present only the SQL types "SQL_INTEGER",
"SQL_DOUBLE" and "SQL_NUMERIC" are supported.
For "SQL_INTEGER" the effect is similar to using the value in an
expression that requires an integer. It gives the perl scalar an
'integer aspect'. (Technically the value gains an IV, or possibly a UV
or NV if the value is too large for an IV.)
For "SQL_DOUBLE" the effect is similar to using the value in an
expression that requires a general numeric value. It gives the perl
scalar a 'numeric aspect'. (Technically the value gains an NV.)
"SQL_NUMERIC" is similar to "SQL_INTEGER" or "SQL_DOUBLE" but more
general and more cautious. It will look at the string first and if it
looks like an integer (that will fit in an IV or UV) it will act like
"SQL_INTEGER", if it looks like a floating point value it will act like
"SQL_DOUBLE", if it looks like neither then it will do nothing - and
thereby avoid the warnings that would be generated by "SQL_INTEGER" and
"SQL_DOUBLE" when given non-numeric data.
$flags may be:
"DBIstcf_DISCARD_STRING"
If this flag is specified then when the driver successfully casts
the bound perl scalar to a non-string type then the string portion
of the scalar will be discarded.
"DBIstcf_STRICT"
If $sv cannot be cast to the requested $sql_type then by default it
is left untouched and no error is generated. If you specify
"DBIstcf_STRICT" and the cast fails, this will generate an error.
The returned $sts value is:
-2 sql_type is not handled
-1 sv is undef so unchanged
0 sv could not be cast cleanly and DBIstcf_STRICT was used
1 sv could not be cast and DBIstcf_STRICT was not used
2 sv was cast successfully
This method is exported by the :utils tag and was introduced in DBI
1.611.
DBI Dynamic Attributes
Dynamic attributes are always associated with the last handle used
(that handle is represented by $h in the descriptions below).
Where an attribute is equivalent to a method call, then refer to the
method call for all related documentation.
Warning: these attributes are provided as a convenience but they do
have limitations. Specifically, they have a short lifespan: because
they are associated with the last handle used, they should only be used
immediately after calling the method that "sets" them. If in any
doubt, use the corresponding method call.
$DBI::err
Equivalent to "$h->err".
$DBI::errstr
Equivalent to "$h->errstr".
$DBI::state
Equivalent to "$h->state".
$DBI::rows
Equivalent to "$h->rows". Please refer to the documentation for the
"rows" method.
$DBI::lasth
Returns the DBI object handle used for the most recent DBI method call.
If the last DBI method call was a DESTROY then $DBI::lasth will return
the handle of the parent of the destroyed handle, if there is one.
METHODS COMMON TO ALL HANDLES
The following methods can be used by all types of DBI handles.
"err"
$rv = $h->err;
Returns the native database engine error code from the last driver
method called. The code is typically an integer but you should not
assume that.
The DBI resets $h->err to undef before almost all DBI method calls, so
the value only has a short lifespan. Also, for most drivers, the
statement handles share the same error variable as the parent database
handle, so calling a method on one handle may reset the error on the
related handles.
(Methods which don't reset err before being called include err() and
errstr(), obviously, state(), rows(), func(), trace(), trace_msg(),
ping(), and the tied hash attribute FETCH() and STORE() methods.)
If you need to test for specific error conditions and have your program
be portable to different database engines, then you'll need to
determine what the corresponding error codes are for all those engines
and test for all of them.
The DBI uses the value of $DBI::stderr as the "err" value for internal
errors. Drivers should also do likewise. The default value for
$DBI::stderr is 2000000000.
A driver may return 0 from err() to indicate a warning condition after
a method call. Similarly, a driver may return an empty string to
indicate a 'success with information' condition. In both these cases
the value is false but not undef. The errstr() and state() methods may
be used to retrieve extra information in these cases.
See "set_err" for more information.
"errstr"
$str = $h->errstr;
Returns the native database engine error message from the last DBI
method called. This has the same lifespan issues as the "err" method
described above.
The returned string may contain multiple messages separated by newline
characters.
The errstr() method should not be used to test for errors, use err()
for that, because drivers may return 'success with information' or
warning messages via errstr() for methods that have not 'failed'.
See "set_err" for more information.
"state"
$str = $h->state;
Returns a state code in the standard SQLSTATE five character format.
Note that the specific success code 00000 is translated to any empty
string (false). If the driver does not support SQLSTATE (and most
don't), then state() will return "S1000" (General Error) for all
errors.
The driver is free to return any value via "state", e.g., warning
codes, even if it has not declared an error by returning a true value
via the "err" method described above.
The state() method should not be used to test for errors, use err() for
that, because drivers may return a 'success with information' or
warning state code via state() for methods that have not 'failed'.
"set_err"
$rv = $h->set_err($err, $errstr);
$rv = $h->set_err($err, $errstr, $state);
$rv = $h->set_err($err, $errstr, $state, $method);
$rv = $h->set_err($err, $errstr, $state, $method, $rv);
Set the "err", "errstr", and "state" values for the handle. This
method is typically only used by DBI drivers and DBI subclasses.
If the "HandleSetErr" attribute holds a reference to a subroutine it is
called first. The subroutine can alter the $err, $errstr, $state, and
$method values. See "HandleSetErr" for full details. If the subroutine
returns a true value then the handle "err", "errstr", and "state"
values are not altered and set_err() returns an empty list (it normally
returns $rv which defaults to undef, see below).
Setting "err" to a true value indicates an error and will trigger the
normal DBI error handling mechanisms, such as "RaiseError" and
"HandleError", if they are enabled, when execution returns from the DBI
back to the application.
Setting "err" to "" indicates an 'information' state, and setting it to
"0" indicates a 'warning' state. Setting "err" to "undef" also sets
"errstr" to undef, and "state" to "", irrespective of the values of the
$errstr and $state parameters.
The $method parameter provides an alternate method name for the
"RaiseError"/"PrintError"/"RaiseWarn"/"PrintWarn" error string instead
of the fairly unhelpful '"set_err"'.
The "set_err" method normally returns undef. The $rv parameter
provides an alternate return value.
Some special rules apply if the "err" or "errstr" values for the handle
are already set...
If "errstr" is true then: "" [err was %s now %s]"" is appended if $err
is true and "err" is already true and the new err value differs from
the original one. Similarly "" [state was %s now %s]"" is appended if
$state is true and "state" is already true and the new state value
differs from the original one. Finally ""\n"" and the new $errstr are
appended if $errstr differs from the existing errstr value. Obviously
the %s's above are replaced by the corresponding values.
The handle "err" value is set to $err if: $err is true; or handle "err"
value is undef; or $err is defined and the length is greater than the
handle "err" length. The effect is that an 'information' state only
overrides undef; a 'warning' overrides undef or 'information', and an
'error' state overrides anything.
The handle "state" value is set to $state if $state is true and the
handle "err" value was set (by the rules above).
Support for warning and information states was added in DBI 1.41.
"trace"
$h->trace($trace_settings);
$h->trace($trace_settings, $trace_filename);
$trace_settings = $h->trace;
The trace() method is used to alter the trace settings for a handle
(and any future children of that handle). It can also be used to
change where the trace output is sent.
There's a similar method, "DBI->trace", which sets the global default
trace settings.
See the "TRACING" section for full details about the DBI's powerful
tracing facilities.
"trace_msg"
$h->trace_msg($message_text);
$h->trace_msg($message_text, $min_level);
Writes $message_text to the trace file if the trace level is greater
than or equal to $min_level (which defaults to 1). Can also be called
as "DBI->trace_msg($msg)".
See "TRACING" for more details.
"func"
$h->func(@func_arguments, $func_name) or die ...;
The "func" method can be used to call private non-standard and non-
portable methods implemented by the driver. Note that the function name
is given as the last argument.
It's also important to note that the func() method does not clear a
previous error ($DBI::err etc.) and it does not trigger automatic error
detection (RaiseError etc.) so you must check the return status and/or
$h->err to detect errors.
(This method is not directly related to calling stored procedures.
Calling stored procedures is currently not defined by the DBI. Some
drivers, such as DBD::Oracle, support it in non-portable ways. See
driver documentation for more details.)
See also install_method() in DBI::DBD for how you can avoid needing to
use func() and gain direct access to driver-private methods.
"can"
$is_implemented = $h->can($method_name);
Returns true if $method_name is implemented by the driver or a default
method is provided by the DBI's driver base class. It returns false
where a driver hasn't implemented a method and the default method is
provided by the DBI's driver base class is just an empty stub.
"parse_trace_flags"
$trace_settings_integer = $h->parse_trace_flags($trace_settings);
Parses a string containing trace settings and returns the corresponding
integer value used internally by the DBI and drivers.
The $trace_settings argument is a string containing a trace level
between 0 and 15 and/or trace flag names separated by vertical bar
(""|"") or comma ("","") characters. For example: "SQL|3|foo".
It uses the parse_trace_flag() method, described below, to process the
individual trace flag names.
The parse_trace_flags() method was added in DBI 1.42.
"parse_trace_flag"
$bit_flag = $h->parse_trace_flag($trace_flag_name);
Returns the bit flag corresponding to the trace flag name in
$trace_flag_name. Drivers are expected to override this method and
check if $trace_flag_name is a driver specific trace flags and, if not,
then call the DBI's default parse_trace_flag().
The parse_trace_flag() method was added in DBI 1.42.
"private_attribute_info"
$hash_ref = $h->private_attribute_info();
Returns a reference to a hash whose keys are the names of driver-
private handle attributes available for the kind of handle (driver,
database, statement) that the method was called on.
For example, the return value when called with a DBD::Sybase $dbh could
look like this:
{
syb_dynamic_supported => undef,
syb_oc_version => undef,
syb_server_version => undef,
syb_server_version_string => undef,
}
and when called with a DBD::Sybase $sth they could look like this:
{
syb_types => undef,
syb_proc_status => undef,
syb_result_type => undef,
}
The values should be undef. Meanings may be assigned to particular
values in future.
"swap_inner_handle"
$rc = $h1->swap_inner_handle( $h2 );
$rc = $h1->swap_inner_handle( $h2, $allow_reparent );
Brain transplants for handles. You don't need to know about this unless
you want to become a handle surgeon.
A DBI handle is a reference to a tied hash. A tied hash has an inner
hash that actually holds the contents. The swap_inner_handle() method
swaps the inner hashes between two handles. The $h1 and $h2 handles
still point to the same tied hashes, but what those hashes are tied to
has been swapped. In effect $h1 becomes $h2 and vice-versa. This is
powerful stuff, expect problems. Use with care.
As a small safety measure, the two handles, $h1 and $h2, have to share
the same parent unless $allow_reparent is true.
The swap_inner_handle() method was added in DBI 1.44.
Here's a quick kind of 'diagram' as a worked example to help think
about what's happening:
Original state:
dbh1o -> dbh1i
sthAo -> sthAi(dbh1i)
dbh2o -> dbh2i
swap_inner_handle dbh1o with dbh2o:
dbh2o -> dbh1i
sthAo -> sthAi(dbh1i)
dbh1o -> dbh2i
create new sth from dbh1o:
dbh2o -> dbh1i
sthAo -> sthAi(dbh1i)
dbh1o -> dbh2i
sthBo -> sthBi(dbh2i)
swap_inner_handle sthAo with sthBo:
dbh2o -> dbh1i
sthBo -> sthAi(dbh1i)
dbh1o -> dbh2i
sthAo -> sthBi(dbh2i)
"visit_child_handles"
$h->visit_child_handles( $coderef );
$h->visit_child_handles( $coderef, $info );
Where $coderef is a reference to a subroutine and $info is an arbitrary
value which, if undefined, defaults to a reference to an empty hash.
Returns $info.
For each child handle of $h, if any, $coderef is invoked as:
$coderef->($child_handle, $info);
If the execution of $coderef returns a true value then
"visit_child_handles" is called on that child handle and passed the
returned value as $info.
For example:
# count database connections with names (DSN) matching a pattern
my $connections = 0;
$dbh->{Driver}->visit_child_handles(sub {
my ($h, $info) = @_;
++$connections if $h->{Name} =~ /foo/;
return 0; # don't visit kids
})
See also "visit_handles".
ATTRIBUTES COMMON TO ALL HANDLES
These attributes are common to all types of DBI handles.
Some attributes are inherited by child handles. That is, the value of
an inherited attribute in a newly created statement handle is the same
as the value in the parent database handle. Changes to attributes in
the new statement handle do not affect the parent database handle and
changes to the database handle do not affect existing statement
handles, only future ones.
Attempting to set or get the value of an unknown attribute generates a
warning, except for private driver specific attributes (which all have
names starting with a lowercase letter).
Example:
$h->{AttributeName} = ...; # set/write
... = $h->{AttributeName}; # get/read
"Warn"
Type: boolean, inherited
The "Warn" attribute enables useful warnings for certain bad practices.
It is enabled by default and should only be disabled in rare
circumstances. Since warnings are generated using the Perl "warn"
function, they can be intercepted using the Perl $SIG{__WARN__} hook.
The "Warn" attribute is not related to the "PrintWarn" attribute.
"Active"
Type: boolean, read-only
The "Active" attribute is true if the handle object is "active". This
is rarely used in applications. The exact meaning of active is somewhat
vague at the moment. For a database handle it typically means that the
handle is connected to a database ("$dbh->disconnect" sets "Active"
off). For a statement handle it typically means that the handle is a
"SELECT" that may have more data to fetch. (Fetching all the data or
calling "$sth->finish" sets "Active" off.)
"Executed"
Type: boolean
The "Executed" attribute is true if the handle object has been
"executed". Currently only the $dbh do() method and the $sth
execute(), execute_array(), and execute_for_fetch() methods set the
"Executed" attribute.
When it's set on a handle it is also set on the parent handle at the
same time. So calling execute() on a $sth also sets the "Executed"
attribute on the parent $dbh.
The "Executed" attribute for a database handle is cleared by the
commit() and rollback() methods (even if they fail). The "Executed"
attribute of a statement handle is not cleared by the DBI under any
circumstances and so acts as a permanent record of whether the
statement handle was ever used.
The "Executed" attribute was added in DBI 1.41.
"Kids"
Type: integer, read-only
For a driver handle, "Kids" is the number of currently existing
database handles that were created from that driver handle. For a
database handle, "Kids" is the number of currently existing statement
handles that were created from that database handle. For a statement
handle, the value is zero.
"ActiveKids"
Type: integer, read-only
Like "Kids", but only counting those that are "Active" (as above).
"CachedKids"
Type: hash ref
For a database handle, "CachedKids" returns a reference to the cache
(hash) of statement handles created by the "prepare_cached" method.
For a driver handle, returns a reference to the cache (hash) of
database handles created by the "connect_cached" method.
"Type"
Type: scalar, read-only
The "Type" attribute identifies the type of a DBI handle. Returns "dr"
for driver handles, "db" for database handles and "st" for statement
handles.
"ChildHandles"
Type: array ref
The ChildHandles attribute contains a reference to an array of all the
handles created by this handle which are still accessible. The
contents of the array are weak-refs and will become undef when the
handle goes out of scope. (They're cleared out occasionally.)
"ChildHandles" returns undef if your perl version does not support weak
references (check the Scalar::Util module). The referenced array
returned should be treated as read-only.
For example, to enumerate all driver handles, database handles and
statement handles:
sub show_child_handles {
my ($h, $level) = @_;
printf "%sh %s %s\n", $h->{Type}, "\t" x $level, $h;
show_child_handles($_, $level + 1)
for (grep { defined } @{$h->{ChildHandles}});
}
my %drivers = DBI->installed_drivers();
show_child_handles($_, 0) for (values %drivers);
"CompatMode"
Type: boolean, inherited
The "CompatMode" attribute is used by emulation layers (such as
Oraperl) to enable compatible behaviour in the underlying driver (e.g.,
DBD::Oracle) for this handle. Not normally set by application code.
It also has the effect of disabling the 'quick FETCH' of attribute
values from the handles attribute cache. So all attribute values are
handled by the drivers own FETCH method. This makes them slightly
slower but is useful for special-purpose drivers like DBD::Multiplex.
"InactiveDestroy"
Type: boolean
The default value, false, means a handle will be fully destroyed as
normal when the last reference to it is removed, just as you'd expect.
If set true then the handle will be treated by the DESTROY as if it was
no longer Active, and so the database engine related effects of
DESTROYing a handle will be skipped. Think of the name as meaning
'treat the handle as not-Active in the DESTROY method'.
For a database handle, this attribute does not disable an explicit call
to the disconnect method, only the implicit call from DESTROY that
happens if the handle is still marked as "Active".
This attribute is specifically designed for use in Unix applications
that "fork" child processes. For some drivers, when the child process
exits the destruction of inherited handles cause the corresponding
handles in the parent process to cease working.
Either the parent or the child process, but not both, should set
"InactiveDestroy" true on all their shared handles. Alternatively, and
preferably, the "AutoInactiveDestroy" can be set in the parent on
connect.
To help tracing applications using fork the process id is shown in the
trace log whenever a DBI or handle trace() method is called. The
process id also shown for every method call if the DBI trace level (not
handle trace level) is set high enough to show the trace from the DBI's
method dispatcher, e.g. >= 9.
"AutoInactiveDestroy"
Type: boolean, inherited
The "InactiveDestroy" attribute, described above, needs to be
explicitly set in the child process after a fork(), on every active
database and statement handle. This is a problem if the code that
performs the fork() is not under your control, perhaps in a third-party
module. Use "AutoInactiveDestroy" to get around this situation.
If set true, the DESTROY method will check the process id of the handle
and, if different from the current process id, it will set the
InactiveDestroy attribute. It is strongly recommended that
"AutoInactiveDestroy" is enabled on all new code (it's only not enabled
by default to avoid backwards compatibility problems).
This is the example it's designed to deal with:
my $dbh = DBI->connect(...);
some_code_that_forks(); # Perhaps without your knowledge
# Child process dies, destroying the inherited dbh
$dbh->do(...); # Breaks because parent $dbh is now broken
The "AutoInactiveDestroy" attribute was added in DBI 1.614.
"PrintWarn"
Type: boolean, inherited
The "PrintWarn" attribute controls the printing of warnings recorded by
the driver. When set to a true value (the default) the DBI will check
method calls to see if a warning condition has been set. If so, the DBI
will effectively do a "warn("$class $method warning: $DBI::errstr")"
where $class is the driver class and $method is the name of the method
which failed. E.g.,
DBD::Oracle::db execute warning: ... warning text here ...
If desired, the warnings can be caught and processed using a
$SIG{__WARN__} handler or modules like CGI::Carp and CGI::ErrorWrap.
See also "set_err" for how warnings are recorded and "HandleSetErr" for
how to influence it.
Fetching the full details of warnings can require an extra round-trip
to the database server for some drivers. In which case the driver may
opt to only fetch the full details of warnings if the "PrintWarn"
attribute is true. If "PrintWarn" is false then these drivers should
still indicate the fact that there were warnings by setting the warning
string to, for example: "3 warnings".
"PrintError"
Type: boolean, inherited
The "PrintError" attribute can be used to force errors to generate
warnings (using "warn") in addition to returning error codes in the
normal way. When set "on", any method which results in an error
occurring will cause the DBI to effectively do a "warn("$class $method
failed: $DBI::errstr")" where $class is the driver class and $method is
the name of the method which failed. E.g.,
DBD::Oracle::db prepare failed: ... error text here ...
By default, "DBI->connect" sets "PrintError" "on".
If desired, the warnings can be caught and processed using a
$SIG{__WARN__} handler or modules like CGI::Carp and CGI::ErrorWrap.
"RaiseWarn"
Type: boolean, inherited
The "RaiseWarn" attribute can be used to force warnings to raise
exceptions rather then simply printing them. It is "off" by default.
When set "on", any method which sets warning condition will cause the
DBI to effectively do a "die("$class $method warning: $DBI::errstr")",
where $class is the driver class and $method is the name of the method
that sets warning condition. E.g.,
DBD::Oracle::db execute warning: ... warning text here ...
If you turn "RaiseWarn" on then you'd normally turn "PrintWarn" off.
If "PrintWarn" is also on, then the "PrintWarn" is done first
(naturally).
This attribute was added in DBI 1.643.
"RaiseError"
Type: boolean, inherited
The "RaiseError" attribute can be used to force errors to raise
exceptions rather than simply return error codes in the normal way. It
is "off" by default. When set "on", any method which results in an
error will cause the DBI to effectively do a "die("$class $method
failed: $DBI::errstr")", where $class is the driver class and $method
is the name of the method that failed. E.g.,
DBD::Oracle::db prepare failed: ... error text here ...
If you turn "RaiseError" on then you'd normally turn "PrintError" off.
If "PrintError" is also on, then the "PrintError" is done first
(naturally).
Typically "RaiseError" is used in conjunction with "eval", or a module
like Try::Tiny or TryCatch, to catch the exception that's been thrown
and handle it. For example:
use Try::Tiny;
try {
...
$sth->execute();
...
} catch {
# $sth->err and $DBI::err will be true if error was from DBI
warn $_; # print the error (which Try::Tiny puts into $_)
... # do whatever you need to deal with the error
};
In the catch block the $DBI::lasth variable can be useful for diagnosis
and reporting if you can't be sure which handle triggered the error.
For example, $DBI::lasth->{Type} and $DBI::lasth->{Statement}.
See also "Transactions".
If you want to temporarily turn "RaiseError" off (inside a library
function that is likely to fail, for example), the recommended way is
like this:
{
local $h->{RaiseError}; # localize and turn off for this block
...
}
The original value will automatically and reliably be restored by Perl,
regardless of how the block is exited. The same logic applies to other
attributes, including "PrintError".
"HandleError"
Type: code ref, inherited
The "HandleError" attribute can be used to provide your own alternative
behaviour in case of errors. If set to a reference to a subroutine then
that subroutine is called when an error is detected (at the same point
that "RaiseError" and "PrintError" are handled). It is called also when
"RaiseWarn" is enabled and a warning is detected.
The subroutine is called with three parameters: the error message
string that "RaiseError", "RaiseWarn" or "PrintError" would use, the
DBI handle being used, and the first value being returned by the method
that failed (typically undef).
If the subroutine returns a false value then the "RaiseError",
"RaiseWarn" and/or "PrintError" attributes are checked and acted upon
as normal.
For example, to "die" with a full stack trace for any error:
use Carp;
$h->{HandleError} = sub { confess(shift) };
Or to turn errors into exceptions:
use Exception; # or your own favourite exception module
$h->{HandleError} = sub { Exception->new('DBI')->raise($_[0]) };
It is possible to 'stack' multiple HandleError handlers by using
closures:
sub your_subroutine {
my $previous_handler = $h->{HandleError};
$h->{HandleError} = sub {
return 1 if $previous_handler and &$previous_handler(@_);
... your code here ...
};
}
Using a "my" inside a subroutine to store the previous "HandleError"
value is important. See perlsub and perlref for more information about
closures.
It is possible for "HandleError" to alter the error message that will
be used by "RaiseError", "RaiseWarn" and "PrintError" if it returns
false. It can do that by altering the value of $_[0]. This example
appends a stack trace to all errors and, unlike the previous example
using Carp::confess, this will work "PrintError" as well as
"RaiseError":
$h->{HandleError} = sub { $_[0]=Carp::longmess($_[0]); 0; };
It is also possible for "HandleError" to hide an error, to a limited
degree, by using "set_err" to reset $DBI::err and $DBI::errstr, and
altering the return value of the failed method. For example:
$h->{HandleError} = sub {
return 0 unless $_[0] =~ /^\S+ fetchrow_arrayref failed:/;
return 0 unless $_[1]->err == 1234; # the error to 'hide'
$h->set_err(undef,undef); # turn off the error
$_[2] = [ ... ]; # supply alternative return value
return 1;
};
This only works for methods which return a single value and is hard to
make reliable (avoiding infinite loops, for example) and so isn't
recommended for general use! If you find a good use for it then please
let me know.
"HandleSetErr"
Type: code ref, inherited
The "HandleSetErr" attribute can be used to intercept the setting of
handle "err", "errstr", and "state" values. If set to a reference to a
subroutine then that subroutine is called whenever set_err() is called,
typically by the driver or a subclass.
The subroutine is called with five arguments, the first five that were
passed to set_err(): the handle, the "err", "errstr", and "state"
values being set, and the method name. These can be altered by changing
the values in the @_ array. The return value affects set_err()
behaviour, see "set_err" for details.
It is possible to 'stack' multiple HandleSetErr handlers by using
closures. See "HandleError" for an example.
The "HandleSetErr" and "HandleError" subroutines differ in subtle but
significant ways. HandleError is only invoked at the point where the
DBI is about to return to the application with "err" set true. It's
not invoked by the failure of a method that's been called by another
DBI method. HandleSetErr, on the other hand, is called whenever
set_err() is called with a defined "err" value, even if false. So it's
not just for errors, despite the name, but also warn and info states.
The set_err() method, and thus HandleSetErr, may be called multiple
times within a method and is usually invoked from deep within driver
code.
In theory a driver can use the return value from HandleSetErr via
set_err() to decide whether to continue or not. If set_err() returns an
empty list, indicating that the HandleSetErr code has 'handled' the
'error', the driver could then continue instead of failing (if that's a
reasonable thing to do). This isn't excepted to be common and any such
cases should be clearly marked in the driver documentation and
discussed on the dbi-dev mailing list.
The "HandleSetErr" attribute was added in DBI 1.41.
"ErrCount"
Type: unsigned integer
The "ErrCount" attribute is incremented whenever the set_err() method
records an error. It isn't incremented by warnings or information
states. It is not reset by the DBI at any time.
The "ErrCount" attribute was added in DBI 1.41. Older drivers may not
have been updated to use set_err() to record errors and so this
attribute may not be incremented when using them.
"ShowErrorStatement"
Type: boolean, inherited
The "ShowErrorStatement" attribute can be used to cause the relevant
Statement text to be appended to the error messages generated by the
"RaiseError", "PrintError", "RaiseWarn" and "PrintWarn" attributes.
Only applies to errors on statement handles plus the prepare(), do(),
and the various "select*()" database handle methods. (The exact format
of the appended text is subject to change.)
If "$h->{ParamValues}" returns a hash reference of parameter
(placeholder) values then those are formatted and appended to the end
of the Statement text in the error message.
"TraceLevel"
Type: integer, inherited
The "TraceLevel" attribute can be used as an alternative to the "trace"
method to set the DBI trace level and trace flags for a specific
handle. See "TRACING" for more details.
The "TraceLevel" attribute is especially useful combined with "local"
to alter the trace settings for just a single block of code.
"FetchHashKeyName"
Type: string, inherited
The "FetchHashKeyName" attribute is used to specify whether the
fetchrow_hashref() method should perform case conversion on the field
names used for the hash keys. For historical reasons it defaults to
'"NAME"' but it is recommended to set it to '"NAME_lc"' (convert to
lower case) or '"NAME_uc"' (convert to upper case) according to your
preference. It can only be set for driver and database handles. For
statement handles the value is frozen when prepare() is called.
"ChopBlanks"
Type: boolean, inherited
The "ChopBlanks" attribute can be used to control the trimming of
trailing space characters from fixed width character (CHAR) fields. No
other field types are affected, even where field values have trailing
spaces.
The default is false (although it is possible that the default may
change). Applications that need specific behaviour should set the
attribute as needed.
Drivers are not required to support this attribute, but any driver
which does not support it must arrange to return "undef" as the
attribute value.
"LongReadLen"
Type: unsigned integer, inherited
The "LongReadLen" attribute may be used to control the maximum length
of 'long' type fields (LONG, BLOB, CLOB, MEMO, etc.) which the driver
will read from the database automatically when it fetches each row of
data.
The "LongReadLen" attribute only relates to fetching and reading long
values; it is not involved in inserting or updating them.
A value of 0 means not to automatically fetch any long data. Drivers
may return undef or an empty string for long fields when "LongReadLen"
is 0.
The default is typically 0 (zero) or 80 bytes but may vary between
drivers. Applications fetching long fields should set this value to
slightly larger than the longest long field value to be fetched.
Some databases return some long types encoded as pairs of hex digits.
For these types, "LongReadLen" relates to the underlying data length
and not the doubled-up length of the encoded string.
Changing the value of "LongReadLen" for a statement handle after it has
been "prepare"'d will typically have no effect, so it's common to set
"LongReadLen" on the $dbh before calling "prepare".
For most drivers the value used here has a direct effect on the memory
used by the statement handle while it's active, so don't be too
generous. If you can't be sure what value to use you could execute an
extra select statement to determine the longest value. For example:
$dbh->{LongReadLen} = $dbh->selectrow_array(qq{
SELECT MAX(OCTET_LENGTH(long_column_name))
FROM table WHERE ...
});
$sth = $dbh->prepare(qq{
SELECT long_column_name, ... FROM table WHERE ...
});
You may need to take extra care if the table can be modified between
the first select and the second being executed. You may also need to
use a different function if OCTET_LENGTH() does not work for long types
in your database. For example, for Sybase use DATALENGTH() and for
Oracle use LENGTHB().
See also "LongTruncOk" for information on truncation of long types.
"LongTruncOk"
Type: boolean, inherited
The "LongTruncOk" attribute may be used to control the effect of
fetching a long field value which has been truncated (typically because
it's longer than the value of the "LongReadLen" attribute).
By default, "LongTruncOk" is false and so fetching a long value that
needs to be truncated will cause the fetch to fail. (Applications
should always be sure to check for errors after a fetch loop in case an
error, such as a divide by zero or long field truncation, caused the
fetch to terminate prematurely.)
If a fetch fails due to a long field truncation when "LongTruncOk" is
false, many drivers will allow you to continue fetching further rows.
See also "LongReadLen".
"TaintIn"
Type: boolean, inherited
If the "TaintIn" attribute is set to a true value and Perl is running
in taint mode (e.g., started with the "-T" option), then all the
arguments to most DBI method calls are checked for being tainted. This
may change.
The attribute defaults to off, even if Perl is in taint mode. See
perlsec for more about taint mode. If Perl is not running in taint
mode, this attribute has no effect.
When fetching data that you trust you can turn off the TaintIn
attribute, for that statement handle, for the duration of the fetch
loop.
The "TaintIn" attribute was added in DBI 1.31.
"TaintOut"
Type: boolean, inherited
If the "TaintOut" attribute is set to a true value and Perl is running
in taint mode (e.g., started with the "-T" option), then most data
fetched from the database is considered tainted. This may change.
The attribute defaults to off, even if Perl is in taint mode. See
perlsec for more about taint mode. If Perl is not running in taint
mode, this attribute has no effect.
When fetching data that you trust you can turn off the TaintOut
attribute, for that statement handle, for the duration of the fetch
loop.
Currently only fetched data is tainted. It is possible that the results
of other DBI method calls, and the value of fetched attributes, may
also be tainted in future versions. That change may well break your
applications unless you take great care now. If you use DBI Taint mode,
please report your experience and any suggestions for changes.
The "TaintOut" attribute was added in DBI 1.31.
"Taint"
Type: boolean, inherited
The "Taint" attribute is a shortcut for "TaintIn" and "TaintOut" (it is
also present for backwards compatibility).
Setting this attribute sets both "TaintIn" and "TaintOut", and
retrieving it returns a true value if and only if "TaintIn" and
"TaintOut" are both set to true values.
"Profile"
Type: inherited
The "Profile" attribute enables the collection and reporting of method
call timing statistics. See the DBI::Profile module documentation for
much more detail.
The "Profile" attribute was added in DBI 1.24.
"ReadOnly"
Type: boolean, inherited
An application can set the "ReadOnly" attribute of a handle to a true
value to indicate that it will not be attempting to make any changes
using that handle or any children of it.
Note that the exact definition of 'read only' is rather fuzzy. For
more details see the documentation for the driver you're using.
If the driver can make the handle truly read-only then it should
(unless doing so would have unpleasant side effect, like changing the
consistency level from per-statement to per-session). Otherwise the
attribute is simply advisory.
A driver can set the "ReadOnly" attribute itself to indicate that the
data it is connected to cannot be changed for some reason.
If the driver cannot ensure the "ReadOnly" attribute is adhered to it
will record a warning. In this case reading the "ReadOnly" attribute
back after it is set true will return true even if the underlying
driver cannot ensure this (so any application knows the application
declared itself ReadOnly).
Library modules and proxy drivers can use the attribute to influence
their behavior. For example, the DBD::Gofer driver considers the
"ReadOnly" attribute when making a decision about whether to retry an
operation that failed.
The attribute should be set to 1 or 0 (or undef). Other values are
reserved.
"Callbacks"
Type: hash ref
The DBI callback mechanism lets you intercept, and optionally replace,
any method call on a DBI handle. At the extreme, it lets you become a
puppet master, deceiving the application in any way you want.
The "Callbacks" attribute is a hash reference where the keys are DBI
method names and the values are code references. For each key naming a
method, the DBI will execute the associated code reference before
executing the method.
The arguments to the code reference will be the same as to the method,
including the invocant (a database handle or statement handle). For
example, say that to callback to some code on a call to "prepare()":
$dbh->{Callbacks} = {
prepare => sub {
my ($dbh, $query, $attrs) = @_;
print "Preparing q{$query}\n"
},
};
The callback would then be executed when you called the "prepare()"
method:
$dbh->prepare('SELECT 1');
And the output of course would be:
Preparing q{SELECT 1}
Because callbacks are executed before the methods they're associated
with, you can modify the arguments before they're passed on to the
method call. For example, to make sure that all calls to "prepare()"
are immediately prepared by DBD::Pg, add a callback that makes sure
that the "pg_prepare_now" attribute is always set:
my $dbh = DBI->connect($dsn, $username, $auth, {
Callbacks => {
prepare => sub {
$_[2] ||= {};
$_[2]->{pg_prepare_now} = 1;
return; # must return nothing
},
}
});
Note that we are editing the contents of @_ directly. In this case
we've created the attributes hash if it's not passed to the "prepare"
call.
You can also prevent the associated method from ever executing. While a
callback executes, $_ holds the method name. (This allows multiple
callbacks to share the same code reference and still know what method
was called.) To prevent the method from executing, simply "undef $_".
For example, if you wanted to disable calls to "ping()", you could do
this:
$dbh->{Callbacks} = {
ping => sub {
# tell dispatch to not call the method:
undef $_;
# return this value instead:
return "42 bells";
}
};
As with other attributes, Callbacks can be specified on a handle or via
the attributes to "connect()". Callbacks can also be applied to a
statement methods on a statement handle. For example:
$sth->{Callbacks} = {
execute => sub {
print "Executing ", shift->{Statement}, "\n";
}
};
The "Callbacks" attribute of a database handle isn't copied to any
statement handles it creates. So setting callbacks for a statement
handle requires you to set the "Callbacks" attribute on the statement
handle yourself, as in the example above, or use the special
"ChildCallbacks" key described below.
Special Keys in Callbacks Attribute
In addition to DBI handle method names, the "Callbacks" hash reference
supports four additional keys.
The first is the "ChildCallbacks" key. When a statement handle is
created from a database handle the "ChildCallbacks" key of the database
handle's "Callbacks" attribute, if any, becomes the new "Callbacks"
attribute of the statement handle. This allows you to define callbacks
for all statement handles created from a database handle. For example,
if you wanted to count how many times "execute" was called in your
application, you could write:
my $exec_count = 0;
my $dbh = DBI->connect( $dsn, $username, $auth, {
Callbacks => {
ChildCallbacks => {
execute => sub { $exec_count++; return; }
}
}
});
END {
print "The execute method was called $exec_count times\n";
}
The other three special keys are "connect_cached.new",
"connect_cached.connected", and "connect_cached.reused". These keys
define callbacks that are called when "connect_cached()" is called, but
allow different behaviors depending on whether a new handle is created
or a handle is returned. The callback is invoked with these arguments:
"$dbh, $dsn, $user, $auth, $attr".
For example, some applications uses "connect_cached()" to connect with
"AutoCommit" enabled and then disable "AutoCommit" temporarily for
transactions. If "connect_cached()" is called during a transaction,
perhaps in a utility method, then it might select the same cached
handle and then force "AutoCommit" on, forcing a commit of the
transaction. See the "connect_cached" documentation for one way to deal
with that. Here we'll describe an alternative approach using a
callback.
Because the "connect_cached.new" and "connect_cached.reused" callbacks
are invoked before "connect_cached()" has applied the connect
attributes, you can use them to edit the attributes that will be
applied. To prevent a cached handle from having its transactions
committed before it's returned, you can eliminate the "AutoCommit"
attribute in a "connect_cached.reused" callback, like so:
my $cb = {
'connect_cached.reused' => sub { delete $_[4]->{AutoCommit} },
};
sub dbh {
my $self = shift;
DBI->connect_cached( $dsn, $username, $auth, {
PrintError => 0,
RaiseError => 1,
AutoCommit => 1,
Callbacks => $cb,
});
}
The upshot is that new database handles are created with "AutoCommit"
enabled, while cached database handles are left in whatever transaction
state they happened to be in when retrieved from the cache.
Note that we've also used a lexical for the callbacks hash reference.
This is because "connect_cached()" returns a new database handle if any
of the attributes passed to is have changed. If we used an inline hash
reference, "connect_cached()" would return a new database handle every
time. Which would rather defeat the purpose.
A more common application for callbacks is setting connection state
only when a new connection is made (by connect() or connect_cached()).
Adding a callback to the connected method (when using "connect") or via
"connect_cached.connected" (when useing connect_cached()>) makes this
easy. The connected() method is a no-op by default (unless you
subclass the DBI and change it). The DBI calls it to indicate that a
new connection has been made and the connection attributes have all
been set. You can give it a bit of added functionality by applying a
callback to it. For example, to make sure that MySQL understands your
application's ANSI-compliant SQL, set it up like so:
my $dbh = DBI->connect($dsn, $username, $auth, {
Callbacks => {
connected => sub {
shift->do(q{
SET SESSION sql_mode='ansi,strict_trans_tables,no_auto_value_on_zero';
});
return;
},
}
});
If you're using "connect_cached()", use the "connect_cached.connected"
callback, instead. This is because "connected()" is called for both new
and reused database handles, but you want to execute a callback only
the when a new database handle is returned. For example, to set the
time zone on connection to a PostgreSQL database, try this:
my $cb = {
'connect_cached.connected' => sub {
shift->do('SET timezone = UTC');
}
};
sub dbh {
my $self = shift;
DBI->connect_cached( $dsn, $username, $auth, { Callbacks => $cb });
}
One significant limitation with callbacks is that there can only be one
per method per handle. This means it's easy for one use of callbacks to
interfere with, or typically simply overwrite, another use of
callbacks. For this reason modules using callbacks should document the
fact clearly so application authors can tell if use of callbacks by the
module will clash with use of callbacks by the application.
You might be able to work around this issue by taking a copy of the
original callback and calling it within your own. For example:
my $prev_cb = $h->{Callbacks}{method_name};
$h->{Callbacks}{method_name} = sub {
if ($prev_cb) {
my @result = $prev_cb->(@_);
return @result if not $_; # $prev_cb vetoed call
}
... your callback logic here ...
};
"private_your_module_name_*"
The DBI provides a way to store extra information in a DBI handle as
"private" attributes. The DBI will allow you to store and retrieve any
attribute which has a name starting with ""private_"".
It is strongly recommended that you use just one private attribute
(e.g., use a hash ref) and give it a long and unambiguous name that
includes the module or application name that the attribute relates to
(e.g., ""private_YourFullModuleName_thingy"").
Because of the way the Perl tie mechanism works you cannot reliably use
the "||=" operator directly to initialise the attribute, like this:
my $foo = $dbh->{private_yourmodname_foo} ||= { ... }; # WRONG
you should use a two step approach like this:
my $foo = $dbh->{private_yourmodname_foo};
$foo ||= $dbh->{private_yourmodname_foo} = { ... };
This attribute is primarily of interest to people sub-classing DBI, or
for applications to piggy-back extra information onto DBI handles.
DBI DATABASE HANDLE OBJECTS
This section covers the methods and attributes associated with database
handles.
Database Handle Methods
The following methods are specified for DBI database handles:
"clone"
$new_dbh = $dbh->clone(\%attr);
The "clone" method duplicates the $dbh connection by connecting with
the same parameters ($dsn, $user, $password) as originally used.
The attributes for the cloned connect are the same as those used for
the original connect, with any other attributes in "\%attr" merged over
them. Effectively the same as doing:
%attributes_used = ( %original_attributes, %attr );
If \%attr is not given then it defaults to a hash containing all the
attributes in the attribute cache of $dbh excluding any non-code
references, plus the main boolean attributes (RaiseError, PrintError,
AutoCommit, etc.). This behaviour is unreliable and so use of clone
without an argument is deprecated and may cause a warning in a future
release.
The clone method can be used even if the database handle is
disconnected.
The "clone" method was added in DBI 1.33.
"data_sources"
@ary = $dbh->data_sources();
@ary = $dbh->data_sources(\%attr);
Returns a list of data sources (databases) available via the $dbh
driver's data_sources() method, plus any extra data sources that the
driver can discover via the connected $dbh. Typically the extra data
sources are other databases managed by the same server process that the
$dbh is connected to.
Data sources are returned in a form suitable for passing to the
"connect" method (that is, they will include the ""dbi:$driver:""
prefix).
The data_sources() method, for a $dbh, was added in DBI 1.38.
"do"
$rows = $dbh->do($statement) or die $dbh->errstr;
$rows = $dbh->do($statement, \%attr) or die $dbh->errstr;
$rows = $dbh->do($statement, \%attr, @bind_values) or die ...
Prepare and execute a single statement. Returns the number of rows
affected or "undef" on error. A return value of "-1" means the number
of rows is not known, not applicable, or not available.
This method is typically most useful for non-"SELECT" statements that
either cannot be prepared in advance (due to a limitation of the
driver) or do not need to be executed repeatedly. It should not be used
for "SELECT" statements because it does not return a statement handle
(so you can't fetch any data).
The default "do" method is logically similar to:
sub do {
my($dbh, $statement, $attr, @bind_values) = @_;
my $sth = $dbh->prepare($statement, $attr) or return undef;
$sth->execute(@bind_values) or return undef;
my $rows = $sth->rows;
($rows == 0) ? "0E0" : $rows; # always return true if no error
}
For example:
my $rows_deleted = $dbh->do(q{
DELETE FROM table
WHERE status = ?
}, undef, 'DONE') or die $dbh->errstr;
Using placeholders and @bind_values with the "do" method can be useful
because it avoids the need to correctly quote any variables in the
$statement. But if you'll be executing the statement many times then
it's more efficient to "prepare" it once and call "execute" many times
instead.
The "q{...}" style quoting used in this example avoids clashing with
quotes that may be used in the SQL statement. Use the double-quote-like
"qq{...}" operator if you want to interpolate variables into the
string. See "Quote and Quote-like Operators" in perlop for more
details.
Note drivers are free to avoid the overhead of creating an DBI
statement handle for do(), especially if there are no parameters. In
this case error handlers, if invoked during do(), will be passed the
database handle.
"last_insert_id"
$rv = $dbh->last_insert_id();
$rv = $dbh->last_insert_id($catalog, $schema, $table, $field);
$rv = $dbh->last_insert_id($catalog, $schema, $table, $field, \%attr);
Returns a value 'identifying' the row just inserted, if possible.
Typically this would be a value assigned by the database server to a
column with an auto_increment or serial type. Returns undef if the
driver does not support the method or can't determine the value.
The $catalog, $schema, $table, and $field parameters may be required
for some drivers (see below). If you don't know the parameter values
and your driver does not need them, then use "undef" for each.
There are several caveats to be aware of with this method if you want
to use it for portable applications:
* For some drivers the value may only be available immediately after
the insert statement has executed (e.g., mysql, Informix).
* For some drivers the $catalog, $schema, $table, and $field parameters
are required, for others they are ignored (e.g., mysql).
* Drivers may return an indeterminate value if no insert has been
performed yet.
* For some drivers the value may only be available if placeholders have
not been used (e.g., Sybase, MS SQL). In this case the value returned
would be from the last non-placeholder insert statement.
* Some drivers may need driver-specific hints about how to get the
value. For example, being told the name of the database 'sequence'
object that holds the value. Any such hints are passed as driver-
specific attributes in the \%attr parameter.
* If the underlying database offers nothing better, then some drivers
may attempt to implement this method by executing ""select max($field)
from $table"". Drivers using any approach like this should issue a
warning if "AutoCommit" is true because it is generally unsafe -
another process may have modified the table between your insert and the
select. For situations where you know it is safe, such as when you have
locked the table, you can silence the warning by passing "Warn" => 0 in
\%attr.
* If no insert has been performed yet, or the last insert failed, then
the value is implementation defined.
Given all the caveats above, it's clear that this method must be used
with care.
The "last_insert_id" method was added in DBI 1.38.
"selectrow_array"
@row_ary = $dbh->selectrow_array($statement);
@row_ary = $dbh->selectrow_array($statement, \%attr);
@row_ary = $dbh->selectrow_array($statement, \%attr, @bind_values);
This utility method combines "prepare", "execute" and "fetchrow_array"
into a single call. If called in a list context, it returns the first
row of data from the statement. The $statement parameter can be a
previously prepared statement handle, in which case the "prepare" is
skipped.
If any method fails, and "RaiseError" is not set, "selectrow_array"
will return an empty list.
If called in a scalar context for a statement handle that has more than
one column, it is undefined whether the driver will return the value of
the first column or the last. So don't do that. Also, in a scalar
context, an "undef" is returned if there are no more rows or if an
error occurred. That "undef" can't be distinguished from an "undef"
returned because the first field value was NULL. For these reasons you
should exercise some caution if you use "selectrow_array" in a scalar
context, or just don't do that.
"selectrow_arrayref"
$ary_ref = $dbh->selectrow_arrayref($statement);
$ary_ref = $dbh->selectrow_arrayref($statement, \%attr);
$ary_ref = $dbh->selectrow_arrayref($statement, \%attr, @bind_values);
This utility method combines "prepare", "execute" and
"fetchrow_arrayref" into a single call. It returns the first row of
data from the statement. The $statement parameter can be a previously
prepared statement handle, in which case the "prepare" is skipped.
If any method fails, and "RaiseError" is not set, "selectrow_arrayref"
will return undef.
"selectrow_hashref"
$hash_ref = $dbh->selectrow_hashref($statement);
$hash_ref = $dbh->selectrow_hashref($statement, \%attr);
$hash_ref = $dbh->selectrow_hashref($statement, \%attr, @bind_values);
This utility method combines "prepare", "execute" and
"fetchrow_hashref" into a single call. It returns the first row of data
from the statement. The $statement parameter can be a previously
prepared statement handle, in which case the "prepare" is skipped.
If any method fails, and "RaiseError" is not set, "selectrow_hashref"
will return undef.
"selectall_arrayref"
$ary_ref = $dbh->selectall_arrayref($statement);
$ary_ref = $dbh->selectall_arrayref($statement, \%attr);
$ary_ref = $dbh->selectall_arrayref($statement, \%attr, @bind_values);
This utility method combines "prepare", "execute" and
"fetchall_arrayref" into a single call. It returns a reference to an
array containing a reference to an array (or hash, see below) for each
row of data fetched.
The $statement parameter can be a previously prepared statement handle,
in which case the "prepare" is skipped. This is recommended if the
statement is going to be executed many times.
If "RaiseError" is not set and any method except "fetchall_arrayref"
fails then "selectall_arrayref" will return "undef"; if
"fetchall_arrayref" fails then it will return with whatever data has
been fetched thus far. You should check "$dbh->err" afterwards (or use
the "RaiseError" attribute) to discover if the data is complete or was
truncated due to an error.
The "fetchall_arrayref" method called by "selectall_arrayref" supports
a $max_rows parameter. You can specify a value for $max_rows by
including a '"MaxRows"' attribute in \%attr. In which case finish() is
called for you after fetchall_arrayref() returns.
The "fetchall_arrayref" method called by "selectall_arrayref" also
supports a $slice parameter. You can specify a value for $slice by
including a '"Slice"' or '"Columns"' attribute in \%attr. The only
difference between the two is that if "Slice" is not defined and
"Columns" is an array ref, then the array is assumed to contain column
index values (which count from 1), rather than perl array index values.
In which case the array is copied and each value decremented before
passing to "/fetchall_arrayref".
You may often want to fetch an array of rows where each row is stored
as a hash. That can be done simply using:
my $emps = $dbh->selectall_arrayref(
"SELECT ename FROM emp ORDER BY ename",
{ Slice => {} }
);
foreach my $emp ( @$emps ) {
print "Employee: $emp->{ename}\n";
}
Or, to fetch into an array instead of an array ref:
@result = @{ $dbh->selectall_arrayref($sql, { Slice => {} }) };
See "fetchall_arrayref" method for more details.
"selectall_array"
@ary = $dbh->selectall_array($statement);
@ary = $dbh->selectall_array($statement, \%attr);
@ary = $dbh->selectall_array($statement, \%attr, @bind_values);
This is a convenience wrapper around "selectall_arrayref" that returns
the rows directly as a list, rather than a reference to an array of
rows.
Note that if "RaiseError" is not set then you can't tell the difference
between returning no rows and an error. Using RaiseError is best
practice.
The "selectall_array" method was added in DBI 1.635.
"selectall_hashref"
$hash_ref = $dbh->selectall_hashref($statement, $key_field);
$hash_ref = $dbh->selectall_hashref($statement, $key_field, \%attr);
$hash_ref = $dbh->selectall_hashref($statement, $key_field, \%attr, @bind_values);
This utility method combines "prepare", "execute" and
"fetchall_hashref" into a single call. It returns a reference to a hash
containing one entry, at most, for each row, as returned by
fetchall_hashref().
The $statement parameter can be a previously prepared statement handle,
in which case the "prepare" is skipped. This is recommended if the
statement is going to be executed many times.
The $key_field parameter defines which column, or columns, are used as
keys in the returned hash. It can either be the name of a single field,
or a reference to an array containing multiple field names. Using
multiple names yields a tree of nested hashes.
If a row has the same key as an earlier row then it replaces the
earlier row.
If any method except "fetchall_hashref" fails, and "RaiseError" is not
set, "selectall_hashref" will return "undef". If "fetchall_hashref"
fails and "RaiseError" is not set, then it will return with whatever
data it has fetched thus far. $DBI::err should be checked to catch
that.
See fetchall_hashref() for more details.
"selectcol_arrayref"
$ary_ref = $dbh->selectcol_arrayref($statement);
$ary_ref = $dbh->selectcol_arrayref($statement, \%attr);
$ary_ref = $dbh->selectcol_arrayref($statement, \%attr, @bind_values);
This utility method combines "prepare", "execute", and fetching one
column from all the rows, into a single call. It returns a reference to
an array containing the values of the first column from each row.
The $statement parameter can be a previously prepared statement handle,
in which case the "prepare" is skipped. This is recommended if the
statement is going to be executed many times.
If any method except "fetch" fails, and "RaiseError" is not set,
"selectcol_arrayref" will return "undef". If "fetch" fails and
"RaiseError" is not set, then it will return with whatever data it has
fetched thus far. $DBI::err should be checked to catch that.
The "selectcol_arrayref" method defaults to pushing a single column
value (the first) from each row into the result array. However, it can
also push another column, or even multiple columns per row, into the
result array. This behaviour can be specified via a '"Columns"'
attribute which must be a ref to an array containing the column number
or numbers to use. For example:
# get array of id and name pairs:
my $ary_ref = $dbh->selectcol_arrayref("select id, name from table", { Columns=>[1,2] });
my %hash = @$ary_ref; # build hash from key-value pairs so $hash{$id} => name
You can specify a maximum number of rows to fetch by including a
'"MaxRows"' attribute in \%attr.
"prepare"
$sth = $dbh->prepare($statement) or die $dbh->errstr;
$sth = $dbh->prepare($statement, \%attr) or die $dbh->errstr;
Prepares a statement for later execution by the database engine and
returns a reference to a statement handle object.
The returned statement handle can be used to get attributes of the
statement and invoke the "execute" method. See "Statement Handle
Methods".
Drivers for engines without the concept of preparing a statement will
typically just store the statement in the returned handle and process
it when "$sth->execute" is called. Such drivers are unlikely to give
much useful information about the statement, such as
"$sth->{NUM_OF_FIELDS}", until after "$sth->execute" has been called.
Portable applications should take this into account.
In general, DBI drivers do not parse the contents of the statement
(other than simply counting any Placeholders). The statement is passed
directly to the database engine, sometimes known as pass-thru mode.
This has advantages and disadvantages. On the plus side, you can access
all the functionality of the engine being used. On the downside, you're
limited if you're using a simple engine, and you need to take extra
care if writing applications intended to be portable between engines.
Portable applications should not assume that a new statement can be
prepared and/or executed while still fetching results from a previous
statement.
Some command-line SQL tools use statement terminators, like a
semicolon, to indicate the end of a statement. Such terminators should
not normally be used with the DBI.
"prepare_cached"
$sth = $dbh->prepare_cached($statement)
$sth = $dbh->prepare_cached($statement, \%attr)
$sth = $dbh->prepare_cached($statement, \%attr, $if_active)
Like "prepare" except that the statement handle returned will be stored
in a hash associated with the $dbh. If another call is made to
"prepare_cached" with the same $statement and %attr parameter values,
then the corresponding cached $sth will be returned without contacting
the database server. Be sure to understand the cautions and caveats
noted below.
The $if_active parameter lets you adjust the behaviour if an already
cached statement handle is still Active. There are several
alternatives:
0: A warning will be generated, and finish() will be called on the
statement handle before it is returned. This is the default behaviour
if $if_active is not passed.
1: finish() will be called on the statement handle, but the warning is
suppressed.
2: Disables any checking.
3: The existing active statement handle will be removed from the cache
and a new statement handle prepared and cached in its place. This is
the safest option because it doesn't affect the state of the old
handle, it just removes it from the cache. [Added in DBI 1.40]
Here are some examples of "prepare_cached":
sub insert_hash {
my ($table, $field_values) = @_;
# sort to keep field order, and thus sql, stable for prepare_cached
my @fields = sort keys %$field_values;
my @values = @{$field_values}{@fields};
my $sql = sprintf "insert into %s (%s) values (%s)",
$table, join(",", @fields), join(",", ("?")x@fields);
my $sth = $dbh->prepare_cached($sql);
return $sth->execute(@values);
}
sub search_hash {
my ($table, $field_values) = @_;
# sort to keep field order, and thus sql, stable for prepare_cached
my @fields = sort keys %$field_values;
my @values = @{$field_values}{@fields};
my $qualifier = "";
$qualifier = "where ".join(" and ", map { "$_=?" } @fields) if @fields;
$sth = $dbh->prepare_cached("SELECT * FROM $table $qualifier");
return $dbh->selectall_arrayref($sth, {}, @values);
}
Caveat emptor: This caching can be useful in some applications, but it
can also cause problems and should be used with care. Here is a
contrived case where caching would cause a significant problem:
my $sth = $dbh->prepare_cached('SELECT * FROM foo WHERE bar=?');
$sth->execute(...);
while (my $data = $sth->fetchrow_hashref) {
# later, in some other code called within the loop...
my $sth2 = $dbh->prepare_cached('SELECT * FROM foo WHERE bar=?');
$sth2->execute(...);
while (my $data2 = $sth2->fetchrow_arrayref) {
do_stuff(...);
}
}
In this example, since both handles are preparing the exact same
statement, $sth2 will not be its own statement handle, but a duplicate
of $sth returned from the cache. The results will certainly not be what
you expect. Typically the inner fetch loop will work normally,
fetching all the records and terminating when there are no more, but
now that $sth is the same as $sth2 the outer fetch loop will also
terminate.
You'll know if you run into this problem because prepare_cached() will
generate a warning by default (when $if_active is false).
The cache used by prepare_cached() is keyed by both the statement and
any attributes so you can also avoid this issue by doing something
like:
$sth = $dbh->prepare_cached("...", { dbi_dummy => __FILE__.__LINE__ });
which will ensure that prepare_cached only returns statements cached by
that line of code in that source file.
Also, to ensure the attributes passed are always the same, avoid
passing references inline. For example, the Slice attribute is
specified as a reference. Be sure to declare it external to the call to
prepare_cached(), such that a new hash reference is not created on
every call. See "connect_cached" for more details and examples.
If you'd like the cache to managed intelligently, you can tie the
hashref returned by "CachedKids" to an appropriate caching module, such
as Tie::Cache::LRU:
my $cache;
tie %$cache, 'Tie::Cache::LRU', 500;
$dbh->{CachedKids} = $cache;
"commit"
$rc = $dbh->commit or die $dbh->errstr;
Commit (make permanent) the most recent series of database changes if
the database supports transactions and AutoCommit is off.
If "AutoCommit" is on, then calling "commit" will issue a "commit
ineffective with AutoCommit" warning.
See also "Transactions" in the "FURTHER INFORMATION" section below.
"rollback"
$rc = $dbh->rollback or die $dbh->errstr;
Rollback (undo) the most recent series of uncommitted database changes
if the database supports transactions and AutoCommit is off.
If "AutoCommit" is on, then calling "rollback" will issue a "rollback
ineffective with AutoCommit" warning.
See also "Transactions" in the "FURTHER INFORMATION" section below.
"begin_work"
$rc = $dbh->begin_work or die $dbh->errstr;
Enable transactions (by turning "AutoCommit" off) until the next call
to "commit" or "rollback". After the next "commit" or "rollback",
"AutoCommit" will automatically be turned on again.
If "AutoCommit" is already off when "begin_work" is called then it does
nothing except return an error. If the driver does not support
transactions then when "begin_work" attempts to set "AutoCommit" off
the driver will trigger a fatal error.
See also "Transactions" in the "FURTHER INFORMATION" section below.
"disconnect"
$rc = $dbh->disconnect or warn $dbh->errstr;
Disconnects the database from the database handle. "disconnect" is
typically only used before exiting the program. The handle is of little
use after disconnecting.
The transaction behaviour of the "disconnect" method is, sadly,
undefined. Some database systems (such as Oracle and Ingres) will
automatically commit any outstanding changes, but others (such as
Informix) will rollback any outstanding changes. Applications not
using "AutoCommit" should explicitly call "commit" or "rollback" before
calling "disconnect".
The database is automatically disconnected by the "DESTROY" method if
still connected when there are no longer any references to the handle.
The "DESTROY" method for each driver should implicitly call "rollback"
to undo any uncommitted changes. This is vital behaviour to ensure that
incomplete transactions don't get committed simply because Perl calls
"DESTROY" on every object before exiting. Also, do not rely on the
order of object destruction during "global destruction", as it is
undefined.
Generally, if you want your changes to be committed or rolled back when
you disconnect, then you should explicitly call "commit" or "rollback"
before disconnecting.
If you disconnect from a database while you still have active statement
handles (e.g., SELECT statement handles that may have more data to
fetch), you will get a warning. The warning may indicate that a fetch
loop terminated early, perhaps due to an uncaught error. To avoid the
warning call the "finish" method on the active handles.
"ping"
$rc = $dbh->ping;
Attempts to determine, in a reasonably efficient way, if the database
server is still running and the connection to it is still working.
Individual drivers should implement this function in the most suitable
manner for their database engine.
The current default implementation always returns true without actually
doing anything. Actually, it returns ""0 but true"" which is true but
zero. That way you can tell if the return value is genuine or just the
default. Drivers should override this method with one that does the
right thing for their type of database.
Few applications would have direct use for this method. See the
specialized Apache::DBI module for one example usage.
"get_info"
$value = $dbh->get_info( $info_type );
Returns information about the implementation, i.e. driver and data
source capabilities, restrictions etc. It returns "undef" for unknown
or unimplemented information types. For example:
$database_version = $dbh->get_info( 18 ); # SQL_DBMS_VER
$max_select_tables = $dbh->get_info( 106 ); # SQL_MAXIMUM_TABLES_IN_SELECT
See "Standards Reference Information" for more detailed information
about the information types and their meanings and possible return
values.
The DBI::Const::GetInfoType module exports a %GetInfoType hash that can
be used to map info type names to numbers. For example:
$database_version = $dbh->get_info( $GetInfoType{SQL_DBMS_VER} );
The names are a merging of the ANSI and ODBC standards (which differ in
some cases). See DBI::Const::GetInfoType for more details.
Because some DBI methods make use of get_info(), drivers are strongly
encouraged to support at least the following very minimal set of
information types to ensure the DBI itself works properly:
Type Name Example A Example B
---- -------------------------- ------------ ----------------
17 SQL_DBMS_NAME 'ACCESS' 'Oracle'
18 SQL_DBMS_VER '03.50.0000' '08.01.0721 ...'
29 SQL_IDENTIFIER_QUOTE_CHAR '`' '"'
41 SQL_CATALOG_NAME_SEPARATOR '.' '@'
114 SQL_CATALOG_LOCATION 1 2
Values from 9000 to 9999 for get_info are officially reserved for use
by Perl DBI. Values in that range which have been assigned a meaning
are defined here:
9000: true if a backslash character ("\") before placeholder-like text
(e.g. "?", ":foo") will prevent it being treated as a placeholder by
the driver. The backslash will be removed before the text is passed to
the backend.
"table_info"
$sth = $dbh->table_info( $catalog, $schema, $table, $type );
$sth = $dbh->table_info( $catalog, $schema, $table, $type, \%attr );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch
information about tables and views that exist in the database.
The arguments $catalog, $schema and $table may accept search patterns
according to the database/driver, for example: $table = '%FOO%';
Remember that the underscore character ('"_"') is a search pattern that
means match any character, so 'FOO_%' is the same as 'FOO%' and
'FOO_BAR%' will match names like 'FOO1BAR'.
The value of $type is a comma-separated list of one or more types of
tables to be returned in the result set. Each value may optionally be
quoted, e.g.:
$type = "TABLE";
$type = "'TABLE','VIEW'";
In addition the following special cases may also be supported by some
drivers:
o If the value of $catalog is '%' and $schema and $table name are
empty strings, the result set contains a list of catalog names.
For example:
$sth = $dbh->table_info('%', '', '');
o If the value of $schema is '%' and $catalog and $table are empty
strings, the result set contains a list of schema names.
o If the value of $type is '%' and $catalog, $schema, and $table are
all empty strings, the result set contains a list of table types.
If your driver doesn't support one or more of the selection filter
parameters then you may get back more than you asked for and can do the
filtering yourself.
This method can be expensive, and can return a large amount of data.
(For example, small Oracle installation returns over 2000 rows.) So
it's a good idea to use the filters to limit the data as much as
possible.
The statement handle returned has at least the following fields in the
order show below. Other fields, after these, may also be present.
TABLE_CAT: Table catalog identifier. This field is NULL ("undef") if
not applicable to the data source, which is usually the case. This
field is empty if not applicable to the table.
TABLE_SCHEM: The name of the schema containing the TABLE_NAME value.
This field is NULL ("undef") if not applicable to data source, and
empty if not applicable to the table.
TABLE_NAME: Name of the table (or view, synonym, etc).
TABLE_TYPE: One of the following: "TABLE", "VIEW", "SYSTEM TABLE",
"GLOBAL TEMPORARY", "LOCAL TEMPORARY", "ALIAS", "SYNONYM" or a type
identifier that is specific to the data source.
REMARKS: A description of the table. May be NULL ("undef").
Note that "table_info" might not return records for all tables.
Applications can use any valid table regardless of whether it's
returned by "table_info".
See also "tables", "Catalog Methods" and "Standards Reference
Information".
"column_info"
$sth = $dbh->column_info( $catalog, $schema, $table, $column );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch
information about columns in specified tables.
The arguments $schema, $table and $column may accept search patterns
according to the database/driver, for example: $table = '%FOO%';
Note: The support for the selection criteria is driver specific. If the
driver doesn't support one or more of them then you may get back more
than you asked for and can do the filtering yourself.
Note: If your driver does not support column_info an undef is returned.
This is distinct from asking for something which does not exist in a
driver which supports column_info as a valid statement handle to an
empty result-set will be returned in this case.
If the arguments don't match any tables then you'll still get a
statement handle, it'll just return no rows.
The statement handle returned has at least the following fields in the
order shown below. Other fields, after these, may also be present.
TABLE_CAT: The catalog identifier. This field is NULL ("undef") if not
applicable to the data source, which is often the case. This field is
empty if not applicable to the table.
TABLE_SCHEM: The schema identifier. This field is NULL ("undef") if
not applicable to the data source, and empty if not applicable to the
table.
TABLE_NAME: The table identifier. Note: A driver may provide column
metadata not only for base tables, but also for derived objects like
SYNONYMS etc.
COLUMN_NAME: The column identifier.
DATA_TYPE: The concise data type code.
TYPE_NAME: A data source dependent data type name.
COLUMN_SIZE: The column size. This is the maximum length in characters
for character data types, the number of digits or bits for numeric data
types or the length in the representation of temporal types. See the
relevant specifications for detailed information.
BUFFER_LENGTH: The length in bytes of transferred data.
DECIMAL_DIGITS: The total number of significant digits to the right of
the decimal point.
NUM_PREC_RADIX: The radix for numeric precision. The value is 10 or 2
for numeric data types and NULL ("undef") if not applicable.
NULLABLE: Indicates if a column can accept NULLs. The following values
are defined:
SQL_NO_NULLS 0
SQL_NULLABLE 1
SQL_NULLABLE_UNKNOWN 2
REMARKS: A description of the column.
COLUMN_DEF: The default value of the column, in a format that can be
used directly in an SQL statement.
Note that this may be an expression and not simply the text used for
the default value in the original CREATE TABLE statement. For example,
given:
col1 char(30) default current_user -- a 'function'
col2 char(30) default 'string' -- a string literal
where "current_user" is the name of a function, the corresponding
"COLUMN_DEF" values would be:
Database col1 col2
-------- ---- ----
Oracle: current_user 'string'
Postgres: "current_user"() 'string'::text
MS SQL: (user_name()) ('string')
SQL_DATA_TYPE: The SQL data type.
SQL_DATETIME_SUB: The subtype code for datetime and interval data
types.
CHAR_OCTET_LENGTH: The maximum length in bytes of a character or binary
data type column.
ORDINAL_POSITION: The column sequence number (starting with 1).
IS_NULLABLE: Indicates if the column can accept NULLs. Possible values
are: 'NO', 'YES' and ''.
SQL/CLI defines the following additional columns:
CHAR_SET_CAT
CHAR_SET_SCHEM
CHAR_SET_NAME
COLLATION_CAT
COLLATION_SCHEM
COLLATION_NAME
UDT_CAT
UDT_SCHEM
UDT_NAME
DOMAIN_CAT
DOMAIN_SCHEM
DOMAIN_NAME
SCOPE_CAT
SCOPE_SCHEM
SCOPE_NAME
MAX_CARDINALITY
DTD_IDENTIFIER
IS_SELF_REF
Drivers capable of supplying any of those values should do so in the
corresponding column and supply undef values for the others.
Drivers wishing to provide extra database/driver specific information
should do so in extra columns beyond all those listed above, and use
lowercase field names with the driver-specific prefix (i.e.,
'ora_...'). Applications accessing such fields should do so by name and
not by column number.
The result set is ordered by TABLE_CAT, TABLE_SCHEM, TABLE_NAME and
ORDINAL_POSITION.
Note: There is some overlap with statement handle attributes (in perl)
and SQLDescribeCol (in ODBC). However, SQLColumns provides more
metadata.
See also "Catalog Methods" and "Standards Reference Information".
"primary_key_info"
$sth = $dbh->primary_key_info( $catalog, $schema, $table );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch
information about columns that make up the primary key for a table.
The arguments don't accept search patterns (unlike table_info()).
The statement handle will return one row per column, ordered by
TABLE_CAT, TABLE_SCHEM, TABLE_NAME, and KEY_SEQ. If there is no primary
key then the statement handle will fetch no rows.
Note: The support for the selection criteria, such as $catalog, is
driver specific. If the driver doesn't support catalogs and/or
schemas, it may ignore these criteria.
The statement handle returned has at least the following fields in the
order shown below. Other fields, after these, may also be present.
TABLE_CAT: The catalog identifier. This field is NULL ("undef") if not
applicable to the data source, which is often the case. This field is
empty if not applicable to the table.
TABLE_SCHEM: The schema identifier. This field is NULL ("undef") if
not applicable to the data source, and empty if not applicable to the
table.
TABLE_NAME: The table identifier.
COLUMN_NAME: The column identifier.
KEY_SEQ: The column sequence number (starting with 1). Note: This
field is named ORDINAL_POSITION in SQL/CLI.
PK_NAME: The primary key constraint identifier. This field is NULL
("undef") if not applicable to the data source.
See also "Catalog Methods" and "Standards Reference Information".
"primary_key"
@key_column_names = $dbh->primary_key( $catalog, $schema, $table );
Simple interface to the primary_key_info() method. Returns a list of
the column names that comprise the primary key of the specified table.
The list is in primary key column sequence order. If there is no
primary key then an empty list is returned.
"foreign_key_info"
$sth = $dbh->foreign_key_info( $pk_catalog, $pk_schema, $pk_table
, $fk_catalog, $fk_schema, $fk_table );
$sth = $dbh->foreign_key_info( $pk_catalog, $pk_schema, $pk_table
, $fk_catalog, $fk_schema, $fk_table
, \%attr );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch
information about foreign keys in and/or referencing the specified
table(s). The arguments don't accept search patterns (unlike
table_info()).
$pk_catalog, $pk_schema, $pk_table identify the primary (unique) key
table (PKT).
$fk_catalog, $fk_schema, $fk_table identify the foreign key table
(FKT).
If both PKT and FKT are given, the function returns the foreign key, if
any, in table FKT that refers to the primary (unique) key of table PKT.
(Note: In SQL/CLI, the result is implementation-defined.)
If only PKT is given, then the result set contains the primary key of
that table and all foreign keys that refer to it.
If only FKT is given, then the result set contains all foreign keys in
that table and the primary keys to which they refer. (Note: In
SQL/CLI, the result includes unique keys too.)
For example:
$sth = $dbh->foreign_key_info( undef, $user, 'master');
$sth = $dbh->foreign_key_info( undef, undef, undef , undef, $user, 'detail');
$sth = $dbh->foreign_key_info( undef, $user, 'master', undef, $user, 'detail');
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Note: The support for the selection criteria, such as $catalog, is
driver specific. If the driver doesn't support catalogs and/or
schemas, it may ignore these criteria.
The statement handle returned has the following fields in the order
shown below. Because ODBC never includes unique keys, they define
different columns in the result set than SQL/CLI. SQL/CLI column names
are shown in parentheses.
PKTABLE_CAT ( UK_TABLE_CAT ): The primary (unique) key table
catalog identifier. This field is NULL ("undef") if not applicable to
the data source, which is often the case. This field is empty if not
applicable to the table.
PKTABLE_SCHEM ( UK_TABLE_SCHEM ): The primary (unique) key table
schema identifier. This field is NULL ("undef") if not applicable to
the data source, and empty if not applicable to the table.
PKTABLE_NAME ( UK_TABLE_NAME ): The primary (unique) key table
identifier.
PKCOLUMN_NAME (UK_COLUMN_NAME ): The primary (unique) key column
identifier.
FKTABLE_CAT ( FK_TABLE_CAT ): The foreign key table catalog
identifier. This field is NULL ("undef") if not applicable to the data
source, which is often the case. This field is empty if not applicable
to the table.
FKTABLE_SCHEM ( FK_TABLE_SCHEM ): The foreign key table schema
identifier. This field is NULL ("undef") if not applicable to the data
source, and empty if not applicable to the table.
FKTABLE_NAME ( FK_TABLE_NAME ): The foreign key table identifier.
FKCOLUMN_NAME ( FK_COLUMN_NAME ): The foreign key column
identifier.
KEY_SEQ ( ORDINAL_POSITION ): The column sequence number
(starting with 1).
UPDATE_RULE ( UPDATE_RULE ): The referential action for the
UPDATE rule. The following codes are defined:
CASCADE 0
RESTRICT 1
SET NULL 2
NO ACTION 3
SET DEFAULT 4
DELETE_RULE ( DELETE_RULE ): The referential action for the
DELETE rule. The codes are the same as for UPDATE_RULE.
FK_NAME ( FK_NAME ): The foreign key name.
PK_NAME ( UK_NAME ): The primary (unique) key name.
DEFERRABILITY ( DEFERABILITY ): The deferrability of the foreign
key constraint. The following codes are defined:
INITIALLY DEFERRED 5
INITIALLY IMMEDIATE 6
NOT DEFERRABLE 7
( UNIQUE_OR_PRIMARY ): This column is necessary if a
driver includes all candidate (i.e. primary and alternate) keys in the
result set (as specified by SQL/CLI). The value of this column is
UNIQUE if the foreign key references an alternate key and PRIMARY if
the foreign key references a primary key, or it may be undefined if the
driver doesn't have access to the information.
See also "Catalog Methods" and "Standards Reference Information".
"statistics_info"
Warning: This method is experimental and may change.
$sth = $dbh->statistics_info( $catalog, $schema, $table, $unique_only, $quick );
# then $sth->fetchall_arrayref or $sth->fetchall_hashref etc
Returns an active statement handle that can be used to fetch
statistical information about a table and its indexes.
The arguments don't accept search patterns (unlike "table_info").
If the boolean argument $unique_only is true, only UNIQUE indexes will
be returned in the result set, otherwise all indexes will be returned.
If the boolean argument $quick is set, the actual statistical
information columns (CARDINALITY and PAGES) will only be returned if
they are readily available from the server, and might not be current.
Some databases may return stale statistics or no statistics at all with
this flag set.
The statement handle will return at most one row per column name per
index, plus at most one row for the entire table itself, ordered by
NON_UNIQUE, TYPE, INDEX_QUALIFIER, INDEX_NAME, and ORDINAL_POSITION.
Note: The support for the selection criteria, such as $catalog, is
driver specific. If the driver doesn't support catalogs and/or
schemas, it may ignore these criteria.
The statement handle returned has at least the following fields in the
order shown below. Other fields, after these, may also be present.
TABLE_CAT: The catalog identifier. This field is NULL ("undef") if not
applicable to the data source, which is often the case. This field is
empty if not applicable to the table.
TABLE_SCHEM: The schema identifier. This field is NULL ("undef") if
not applicable to the data source, and empty if not applicable to the
table.
TABLE_NAME: The table identifier.
NON_UNIQUE: Unique index indicator. Returns 0 for unique indexes, 1
for non-unique indexes
INDEX_QUALIFIER: Index qualifier identifier. The identifier that is
used to qualify the index name when doing a "DROP INDEX"; NULL
("undef") is returned if an index qualifier is not supported by the
data source. If a non-NULL (defined) value is returned in this column,
it must be used to qualify the index name on a "DROP INDEX" statement;
otherwise, the TABLE_SCHEM should be used to qualify the index name.
INDEX_NAME: The index identifier.
TYPE: The type of information being returned. Can be any of the
following values: 'table', 'btree', 'clustered', 'content', 'hashed',
or 'other'.
In the case that this field is 'table', all fields other than
TABLE_CAT, TABLE_SCHEM, TABLE_NAME, TYPE, CARDINALITY, and PAGES will
be NULL ("undef").
ORDINAL_POSITION: Column sequence number (starting with 1).
COLUMN_NAME: The column identifier.
ASC_OR_DESC: Column sort sequence. "A" for Ascending, "D" for
Descending, or NULL ("undef") if not supported for this index.
CARDINALITY: Cardinality of the table or index. For indexes, this is
the number of unique values in the index. For tables, this is the
number of rows in the table. If not supported, the value will be NULL
("undef").
PAGES: Number of storage pages used by this table or index. If not
supported, the value will be NULL ("undef").
FILTER_CONDITION: The index filter condition as a string. If the index
is not a filtered index, or it cannot be determined whether the index
is a filtered index, this value is NULL ("undef"). If the index is a
filtered index, but the filter condition cannot be determined, this
value is the empty string ''. Otherwise it will be the literal filter
condition as a string, such as "SALARY <= 4500".
See also "Catalog Methods" and "Standards Reference Information".
"tables"
@names = $dbh->tables( $catalog, $schema, $table, $type );
@names = $dbh->tables; # deprecated
Simple interface to table_info(). Returns a list of matching table
names, possibly including a catalog/schema prefix.
See "table_info" for a description of the parameters.
If "$dbh->get_info(29)" returns true (29 is SQL_IDENTIFIER_QUOTE_CHAR)
then the table names are constructed and quoted by "quote_identifier"
to ensure they are usable even if they contain whitespace or reserved
words etc. This means that the table names returned will include quote
characters.
"type_info_all"
$type_info_all = $dbh->type_info_all;
Returns a reference to an array which holds information about each data
type variant supported by the database and driver. The array and its
contents should be treated as read-only.
The first item is a reference to an 'index' hash of "Name ="> "Index"
pairs. The items following that are references to arrays, one per
supported data type variant. The leading index hash defines the names
and order of the fields within the arrays that follow it. For example:
$type_info_all = [
{ TYPE_NAME => 0,
DATA_TYPE => 1,
COLUMN_SIZE => 2, # was PRECISION originally
LITERAL_PREFIX => 3,
LITERAL_SUFFIX => 4,
CREATE_PARAMS => 5,
NULLABLE => 6,
CASE_SENSITIVE => 7,
SEARCHABLE => 8,
UNSIGNED_ATTRIBUTE=> 9,
FIXED_PREC_SCALE => 10, # was MONEY originally
AUTO_UNIQUE_VALUE => 11, # was AUTO_INCREMENT originally
LOCAL_TYPE_NAME => 12,
MINIMUM_SCALE => 13,
MAXIMUM_SCALE => 14,
SQL_DATA_TYPE => 15,
SQL_DATETIME_SUB => 16,
NUM_PREC_RADIX => 17,
INTERVAL_PRECISION=> 18,
},
[ 'VARCHAR', SQL_VARCHAR,
undef, "'","'", undef,0, 1,1,0,0,0,undef,1,255, undef
],
[ 'INTEGER', SQL_INTEGER,
undef, "", "", undef,0, 0,1,0,0,0,undef,0, 0, 10
],
];
More than one row may have the same value in the "DATA_TYPE" field if
there are different ways to spell the type name and/or there are
variants of the type with different attributes (e.g., with and without
"AUTO_UNIQUE_VALUE" set, with and without "UNSIGNED_ATTRIBUTE", etc).
The rows are ordered by "DATA_TYPE" first and then by how closely each
type maps to the corresponding ODBC SQL data type, closest first.
The meaning of the fields is described in the documentation for the
"type_info" method.
An 'index' hash is provided so you don't need to rely on index values
defined above. However, using DBD::ODBC with some old ODBC drivers may
return older names, shown as comments in the example above. Another
issue with the index hash is that the lettercase of the keys is not
defined. It is usually uppercase, as show here, but drivers may return
names with any lettercase.
Drivers are also free to return extra driver-specific columns of
information - though it's recommended that they start at column index
50 to leave room for expansion of the DBI/ODBC specification.
The type_info_all() method is not normally used directly. The
"type_info" method provides a more usable and useful interface to the
data.
"type_info"
@type_info = $dbh->type_info($data_type);
Returns a list of hash references holding information about one or more
variants of $data_type. The list is ordered by "DATA_TYPE" first and
then by how closely each type maps to the corresponding ODBC SQL data
type, closest first. If called in a scalar context then only the first
(best) element is returned.
If $data_type is undefined or "SQL_ALL_TYPES", then the list will
contain hashes for all data type variants supported by the database and
driver.
If $data_type is an array reference then "type_info" returns the
information for the first type in the array that has any matches.
The keys of the hash follow the same letter case conventions as the
rest of the DBI (see "Naming Conventions and Name Space"). The
following uppercase items should always exist, though may be undef:
TYPE_NAME (string)
Data type name for use in CREATE TABLE statements etc.
DATA_TYPE (integer)
SQL data type number.
COLUMN_SIZE (integer)
For numeric types, this is either the total number of digits (if
the NUM_PREC_RADIX value is 10) or the total number of bits allowed
in the column (if NUM_PREC_RADIX is 2).
For string types, this is the maximum size of the string in
characters.
For date and interval types, this is the maximum number of
characters needed to display the value.
LITERAL_PREFIX (string)
Characters used to prefix a literal. A typical prefix is ""'"" for
characters, or possibly ""0x"" for binary values passed as
hexadecimal. NULL ("undef") is returned for data types for which
this is not applicable.
LITERAL_SUFFIX (string)
Characters used to suffix a literal. Typically ""'"" for
characters. NULL ("undef") is returned for data types where this
is not applicable.
CREATE_PARAMS (string)
Parameter names for data type definition. For example,
"CREATE_PARAMS" for a "DECIMAL" would be ""precision,scale"" if the
DECIMAL type should be declared as "DECIMAL("precision,scale")"
where precision and scale are integer values. For a "VARCHAR" it
would be ""max length"". NULL ("undef") is returned for data types
for which this is not applicable.
NULLABLE (integer)
Indicates whether the data type accepts a NULL value: 0 or an empty
string = no, 1 = yes, 2 = unknown.
CASE_SENSITIVE (boolean)
Indicates whether the data type is case sensitive in collations and
comparisons.
SEARCHABLE (integer)
Indicates how the data type can be used in a WHERE clause, as
follows:
0 - Cannot be used in a WHERE clause
1 - Only with a LIKE predicate
2 - All comparison operators except LIKE
3 - Can be used in a WHERE clause with any comparison operator
UNSIGNED_ATTRIBUTE (boolean)
Indicates whether the data type is unsigned. NULL ("undef") is
returned for data types for which this is not applicable.
FIXED_PREC_SCALE (boolean)
Indicates whether the data type always has the same precision and
scale (such as a money type). NULL ("undef") is returned for data
types for which this is not applicable.
AUTO_UNIQUE_VALUE (boolean)
Indicates whether a column of this data type is automatically set
to a unique value whenever a new row is inserted. NULL ("undef")
is returned for data types for which this is not applicable.
LOCAL_TYPE_NAME (string)
Localized version of the "TYPE_NAME" for use in dialog with users.
NULL ("undef") is returned if a localized name is not available (in
which case "TYPE_NAME" should be used).
MINIMUM_SCALE (integer)
The minimum scale of the data type. If a data type has a fixed
scale, then "MAXIMUM_SCALE" holds the same value. NULL ("undef")
is returned for data types for which this is not applicable.
MAXIMUM_SCALE (integer)
The maximum scale of the data type. If a data type has a fixed
scale, then "MINIMUM_SCALE" holds the same value. NULL ("undef")
is returned for data types for which this is not applicable.
SQL_DATA_TYPE (integer)
This column is the same as the "DATA_TYPE" column, except for
interval and datetime data types. For interval and datetime data
types, the "SQL_DATA_TYPE" field will return "SQL_INTERVAL" or
"SQL_DATETIME", and the "SQL_DATETIME_SUB" field below will return
the subcode for the specific interval or datetime data type. If
this field is NULL, then the driver does not support or report on
interval or datetime subtypes.
SQL_DATETIME_SUB (integer)
For interval or datetime data types, where the "SQL_DATA_TYPE"
field above is "SQL_INTERVAL" or "SQL_DATETIME", this field will
hold the subcode for the specific interval or datetime data type.
Otherwise it will be NULL ("undef").
Although not mentioned explicitly in the standards, it seems there
is a simple relationship between these values:
DATA_TYPE == (10 * SQL_DATA_TYPE) + SQL_DATETIME_SUB
NUM_PREC_RADIX (integer)
The radix value of the data type. For approximate numeric types,
"NUM_PREC_RADIX" contains the value 2 and "COLUMN_SIZE" holds the
number of bits. For exact numeric types, "NUM_PREC_RADIX" contains
the value 10 and "COLUMN_SIZE" holds the number of decimal digits.
NULL ("undef") is returned either for data types for which this is
not applicable or if the driver cannot report this information.
INTERVAL_PRECISION (integer)
The interval leading precision for interval types. NULL is returned
either for data types for which this is not applicable or if the
driver cannot report this information.
For example, to find the type name for the fields in a select statement
you can do:
@names = map { scalar $dbh->type_info($_)->{TYPE_NAME} } @{ $sth->{TYPE} }
Since DBI and ODBC drivers vary in how they map their types into the
ISO standard types you may need to search for more than one type.
Here's an example looking for a usable type to store a date:
$my_date_type = $dbh->type_info( [ SQL_DATE, SQL_TIMESTAMP ] );
Similarly, to more reliably find a type to store small integers, you
could use a list starting with "SQL_SMALLINT", "SQL_INTEGER",
"SQL_DECIMAL", etc.
See also "Standards Reference Information".
"quote"
$sql = $dbh->quote($value);
$sql = $dbh->quote($value, $data_type);
Quote a string literal for use as a literal value in an SQL statement,
by escaping any special characters (such as quotation marks) contained
within the string and adding the required type of outer quotation
marks.
$sql = sprintf "SELECT foo FROM bar WHERE baz = %s",
$dbh->quote("Don't");
For most database types, at least those that conform to SQL standards,
quote would return 'Don''t' (including the outer quotation marks). For
others it may return something like 'Don\'t'
An undefined $value value will be returned as the string "NULL"
(without single quotation marks) to match how NULLs are represented in
SQL.
If $data_type is supplied, it is used to try to determine the required
quoting behaviour by using the information returned by "type_info". As
a special case, the standard numeric types are optimized to return
$value without calling "type_info".
Quote will probably not be able to deal with all possible input (such
as binary data or data containing newlines), and is not related in any
way with escaping or quoting shell meta-characters.
It is valid for the quote() method to return an SQL expression that
evaluates to the desired string. For example:
$quoted = $dbh->quote("one\ntwo\0three")
may return something like:
CONCAT('one', CHAR(12), 'two', CHAR(0), 'three')
The quote() method should not be used with "Placeholders and Bind
Values".
"quote_identifier"
$sql = $dbh->quote_identifier( $name );
$sql = $dbh->quote_identifier( $catalog, $schema, $table, \%attr );
Quote an identifier (table name etc.) for use in an SQL statement, by
escaping any special characters (such as double quotation marks) it
contains and adding the required type of outer quotation marks.
Undefined names are ignored and the remainder are quoted and then
joined together, typically with a dot (".") character. For example:
$id = $dbh->quote_identifier( undef, 'Her schema', 'My table' );
would, for most database types, return "Her schema"."My table"
(including all the double quotation marks).
If three names are supplied then the first is assumed to be a catalog
name and special rules may be applied based on what "get_info" returns
for SQL_CATALOG_NAME_SEPARATOR (41) and SQL_CATALOG_LOCATION (114).
For example, for Oracle:
$id = $dbh->quote_identifier( 'link', 'schema', 'table' );
would return "schema"."table"@"link".
"take_imp_data"
$imp_data = $dbh->take_imp_data;
Leaves the $dbh in an almost dead, zombie-like, state and returns a
binary string of raw implementation data from the driver which
describes the current database connection. Effectively it detaches the
underlying database API connection data from the DBI handle. After
calling take_imp_data(), all other methods except "DESTROY" will
generate a warning and return undef.
Why would you want to do this? You don't, forget I even mentioned it.
Unless, that is, you're implementing something advanced like a multi-
threaded connection pool like "DBI::Pool".
The returned $imp_data can be passed as a "dbi_imp_data" attribute to a
later connect() call, even in a separate thread in the same process,
where the driver can use it to 'adopt' the existing connection that the
implementation data was taken from.
Some things to keep in mind...
* the $imp_data holds the only reference to the underlying database API
connection data. That connection is still 'live' and won't be cleaned
up properly unless the $imp_data is used to create a new $dbh which is
then allowed to disconnect() normally.
* using the same $imp_data to create more than one other new $dbh at a
time may well lead to unpleasant problems. Don't do that.
Any child statement handles are effectively destroyed when
take_imp_data() is called.
The "take_imp_data" method was added in DBI 1.36 but wasn't useful till
1.49.
Database Handle Attributes
This section describes attributes specific to database handles.
Changes to these database handle attributes do not affect any other
existing or future database handles.
Attempting to set or get the value of an unknown attribute generates a
warning, except for private driver-specific attributes (which all have
names starting with a lowercase letter).
Example:
$h->{AutoCommit} = ...; # set/write
... = $h->{AutoCommit}; # get/read
"AutoCommit"
Type: boolean
If true, then database changes cannot be rolled-back (undone). If
false, then database changes automatically occur within a
"transaction", which must either be committed or rolled back using the
"commit" or "rollback" methods.
Drivers should always default to "AutoCommit" mode (an unfortunate
choice largely forced on the DBI by ODBC and JDBC conventions.)
Attempting to set "AutoCommit" to an unsupported value is a fatal
error. This is an important feature of the DBI. Applications that need
full transaction behaviour can set "$dbh->{AutoCommit} = 0" (or set
"AutoCommit" to 0 via "connect") without having to check that the value
was assigned successfully.
For the purposes of this description, we can divide databases into
three categories:
Databases which don't support transactions at all.
Databases in which a transaction is always active.
Databases in which a transaction must be explicitly started (C<'BEGIN WORK'>).
* Databases which don't support transactions at all
For these databases, attempting to turn "AutoCommit" off is a fatal
error. "commit" and "rollback" both issue warnings about being
ineffective while "AutoCommit" is in effect.
* Databases in which a transaction is always active
These are typically mainstream commercial relational databases with
"ANSI standard" transaction behaviour. If "AutoCommit" is off, then
changes to the database won't have any lasting effect unless "commit"
is called (but see also "disconnect"). If "rollback" is called then any
changes since the last commit are undone.
If "AutoCommit" is on, then the effect is the same as if the DBI called
"commit" automatically after every successful database operation. So
calling "commit" or "rollback" explicitly while "AutoCommit" is on
would be ineffective because the changes would have already been
committed.
Changing "AutoCommit" from off to on will trigger a "commit".
For databases which don't support a specific auto-commit mode, the
driver has to commit each statement automatically using an explicit
"COMMIT" after it completes successfully (and roll it back using an
explicit "ROLLBACK" if it fails). The error information reported to
the application will correspond to the statement which was executed,
unless it succeeded and the commit or rollback failed.
* Databases in which a transaction must be explicitly started
For these databases, the intention is to have them act like databases
in which a transaction is always active (as described above).
To do this, the driver will automatically begin an explicit transaction
when "AutoCommit" is turned off, or after a "commit" or "rollback" (or
when the application issues the next database operation after one of
those events).
In this way, the application does not have to treat these databases as
a special case.
See "commit", "disconnect" and "Transactions" for other important notes
about transactions.
"Driver"
Type: handle
Holds the handle of the parent driver. The only recommended use for
this is to find the name of the driver using:
$dbh->{Driver}->{Name}
"Name"
Type: string
Holds the "name" of the database. Usually (and recommended to be) the
same as the ""dbi:DriverName:..."" string used to connect to the
database, but with the leading ""dbi:DriverName:"" removed.
"Statement"
Type: string, read-only
Returns the statement string passed to the most recent "prepare" or
"do" method called in this database handle, even if that method failed.
This is especially useful where "RaiseError" is enabled and the
exception handler checks $@ and sees that a 'prepare' method call
failed.
"RowCacheSize"
Type: integer
A hint to the driver indicating the size of the local row cache that
the application would like the driver to use for future "SELECT"
statements. If a row cache is not implemented, then setting
"RowCacheSize" is ignored and getting the value returns "undef".
Some "RowCacheSize" values have special meaning, as follows:
0 - Automatically determine a reasonable cache size for each C<SELECT>
1 - Disable the local row cache
>1 - Cache this many rows
<0 - Cache as many rows that will fit into this much memory for each C<SELECT>.
Note that large cache sizes may require a very large amount of memory
(cached rows * maximum size of row). Also, a large cache will cause a
longer delay not only for the first fetch, but also whenever the cache
needs refilling.
See also the "RowsInCache" statement handle attribute.
"Username"
Type: string
Returns the username used to connect to the database.
DBI STATEMENT HANDLE OBJECTS
This section lists the methods and attributes associated with DBI
statement handles.
Statement Handle Methods
The DBI defines the following methods for use on DBI statement handles:
"bind_param"
$sth->bind_param($p_num, $bind_value)
$sth->bind_param($p_num, $bind_value, \%attr)
$sth->bind_param($p_num, $bind_value, $bind_type)
The "bind_param" method takes a copy of $bind_value and associates it
(binds it) with a placeholder, identified by $p_num, embedded in the
prepared statement. Placeholders are indicated with question mark
character ("?"). For example:
$dbh->{RaiseError} = 1; # save having to check each method call
$sth = $dbh->prepare("SELECT name, age FROM people WHERE name LIKE ?");
$sth->bind_param(1, "John%"); # placeholders are numbered from 1
$sth->execute;
DBI::dump_results($sth);
See "Placeholders and Bind Values" for more information.
Data Types for Placeholders
The "\%attr" parameter can be used to hint at the data type the
placeholder should have. This is rarely needed. Typically, the driver
is only interested in knowing if the placeholder should be bound as a
number or a string.
$sth->bind_param(1, $value, { TYPE => SQL_INTEGER });
As a short-cut for the common case, the data type can be passed
directly, in place of the "\%attr" hash reference. This example is
equivalent to the one above:
$sth->bind_param(1, $value, SQL_INTEGER);
The "TYPE" value indicates the standard (non-driver-specific) type for
this parameter. To specify the driver-specific type, the driver may
support a driver-specific attribute, such as "{ ora_type => 97 }".
The SQL_INTEGER and other related constants can be imported using
use DBI qw(:sql_types);
See "DBI Constants" for more information.
The data type is 'sticky' in that bind values passed to execute() are
bound with the data type specified by earlier bind_param() calls, if
any. Portable applications should not rely on being able to change the
data type after the first "bind_param" call.
Perl only has string and number scalar data types. All database types
that aren't numbers are bound as strings and must be in a format the
database will understand except where the bind_param() TYPE attribute
specifies a type that implies a particular format. For example, given:
$sth->bind_param(1, $value, SQL_DATETIME);
the driver should expect $value to be in the ODBC standard SQL_DATETIME
format, which is 'YYYY-MM-DD HH:MM:SS'. Similarly for SQL_DATE,
SQL_TIME etc.
As an alternative to specifying the data type in the "bind_param" call,
you can let the driver pass the value as the default type ("VARCHAR").
You can then use an SQL function to convert the type within the
statement. For example:
INSERT INTO price(code, price) VALUES (?, CONVERT(MONEY,?))
The "CONVERT" function used here is just an example. The actual
function and syntax will vary between different databases and is non-
portable.
See also "Placeholders and Bind Values" for more information.
"bind_param_inout"
$rc = $sth->bind_param_inout($p_num, \$bind_value, $max_len) or die $sth->errstr;
$rv = $sth->bind_param_inout($p_num, \$bind_value, $max_len, \%attr) or ...
$rv = $sth->bind_param_inout($p_num, \$bind_value, $max_len, $bind_type) or ...
This method acts like "bind_param", but also enables values to be
updated by the statement. The statement is typically a call to a stored
procedure. The $bind_value must be passed as a reference to the actual
value to be used.
Note that unlike "bind_param", the $bind_value variable is not copied
when "bind_param_inout" is called. Instead, the value in the variable
is read at the time "execute" is called.
The additional $max_len parameter specifies the minimum amount of
memory to allocate to $bind_value for the new value. If the value
returned from the database is too big to fit, then the execution should
fail. If unsure what value to use, pick a generous length, i.e., a
length larger than the longest value that would ever be returned. The
only cost of using a larger value than needed is wasted memory.
Undefined values or "undef" are used to indicate null values. See also
"Placeholders and Bind Values" for more information.
"bind_param_array"
$rc = $sth->bind_param_array($p_num, $array_ref_or_value)
$rc = $sth->bind_param_array($p_num, $array_ref_or_value, \%attr)
$rc = $sth->bind_param_array($p_num, $array_ref_or_value, $bind_type)
The "bind_param_array" method is used to bind an array of values to a
placeholder embedded in the prepared statement which is to be executed
with "execute_array". For example:
$dbh->{RaiseError} = 1; # save having to check each method call
$sth = $dbh->prepare("INSERT INTO staff (first_name, last_name, dept) VALUES(?, ?, ?)");
$sth->bind_param_array(1, [ 'John', 'Mary', 'Tim' ]);
$sth->bind_param_array(2, [ 'Booth', 'Todd', 'Robinson' ]);
$sth->bind_param_array(3, "SALES"); # scalar will be reused for each row
$sth->execute_array( { ArrayTupleStatus => \my @tuple_status } );
The %attr ($bind_type) argument is the same as defined for
"bind_param". Refer to "bind_param" for general details on using
placeholders.
(Note that bind_param_array() can not be used to expand a placeholder
into a list of values for a statement like "SELECT foo WHERE bar IN
(?)". A placeholder can only ever represent one value per execution.)
Scalar values, including "undef", may also be bound by
"bind_param_array". In which case the same value will be used for each
"execute" call. Driver-specific implementations may behave differently,
e.g., when binding to a stored procedure call, some databases may
permit mixing scalars and arrays as arguments.
The default implementation provided by DBI (for drivers that have not
implemented array binding) is to iteratively call "execute" for each
parameter tuple provided in the bound arrays. Drivers may provide more
optimized implementations using whatever bulk operation support the
database API provides. The default driver behaviour should match the
default DBI behaviour, but always consult your driver documentation as
there may be driver specific issues to consider.
Note that the default implementation currently only supports non-data
returning statements (INSERT, UPDATE, but not SELECT). Also,
"bind_param_array" and "bind_param" cannot be mixed in the same
statement execution, and "bind_param_array" must be used with
"execute_array"; using "bind_param_array" will have no effect for
"execute".
The "bind_param_array" method was added in DBI 1.22.
"execute"
$rv = $sth->execute or die $sth->errstr;
$rv = $sth->execute(@bind_values) or die $sth->errstr;
Perform whatever processing is necessary to execute the prepared
statement. An "undef" is returned if an error occurs. A successful
"execute" always returns true regardless of the number of rows
affected, even if it's zero (see below). It is always important to
check the return status of "execute" (and most other DBI methods) for
errors if you're not using "RaiseError".
For a non-"SELECT" statement, "execute" returns the number of rows
affected, if known. If no rows were affected, then "execute" returns
"0E0", which Perl will treat as 0 but will regard as true. Note that it
is not an error for no rows to be affected by a statement. If the
number of rows affected is not known, then "execute" returns -1.
For "SELECT" statements, execute simply "starts" the query within the
database engine. Use one of the fetch methods to retrieve the data
after calling "execute". The "execute" method does not return the
number of rows that will be returned by the query (because most
databases can't tell in advance), it simply returns a true value.
You can tell if the statement was a "SELECT" statement by checking if
"$sth->{NUM_OF_FIELDS}" is greater than zero after calling "execute".
If any arguments are given, then "execute" will effectively call
"bind_param" for each value before executing the statement. Values
bound in this way are usually treated as "SQL_VARCHAR" types unless the
driver can determine the correct type (which is rare), or unless
"bind_param" (or "bind_param_inout") has already been used to specify
the type.
Note that passing "execute" an empty array is the same as passing no
arguments at all, which will execute the statement with previously
bound values. That's probably not what you want.
If execute() is called on a statement handle that's still active
($sth->{Active} is true) then it should effectively call finish() to
tidy up the previous execution results before starting this new
execution.
"execute_array"
$tuples = $sth->execute_array(\%attr) or die $sth->errstr;
$tuples = $sth->execute_array(\%attr, @bind_values) or die $sth->errstr;
($tuples, $rows) = $sth->execute_array(\%attr) or die $sth->errstr;
($tuples, $rows) = $sth->execute_array(\%attr, @bind_values) or die $sth->errstr;
Execute the prepared statement once for each parameter tuple (group of
values) provided either in the @bind_values, or by prior calls to
"bind_param_array", or via a reference passed in \%attr.
When called in scalar context the execute_array() method returns the
number of tuples executed, or "undef" if an error occurred. Like
execute(), a successful execute_array() always returns true regardless
of the number of tuples executed, even if it's zero. If there were any
errors the ArrayTupleStatus array can be used to discover which tuples
failed and with what errors.
When called in list context the execute_array() method returns two
scalars; $tuples is the same as calling execute_array() in scalar
context and $rows is the number of rows affected for each tuple, if
available or -1 if the driver cannot determine this. NOTE, some drivers
cannot determine the number of rows affected per tuple but can provide
the number of rows affected for the batch. If you are doing an update
operation the returned rows affected may not be what you expect if, for
instance, one or more of the tuples affected the same row multiple
times. Some drivers may not yet support list context, in which case
$rows will be undef, or may not be able to provide the number of rows
affected when performing this batch operation, in which case $rows will
be -1.
Bind values for the tuples to be executed may be supplied row-wise by
an "ArrayTupleFetch" attribute, or else column-wise in the @bind_values
argument, or else column-wise by prior calls to "bind_param_array".
Where column-wise binding is used (via the @bind_values argument or
calls to bind_param_array()) the maximum number of elements in any one
of the bound value arrays determines the number of tuples executed.
Placeholders with fewer values in their parameter arrays are treated as
if padded with undef (NULL) values.
If a scalar value is bound, instead of an array reference, it is
treated as a variable length array with all elements having the same
value. It does not influence the number of tuples executed, so if all
bound arrays have zero elements then zero tuples will be executed. If
all bound values are scalars then one tuple will be executed, making
execute_array() act just like execute().
The "ArrayTupleFetch" attribute can be used to specify a reference to a
subroutine that will be called to provide the bind values for each
tuple execution. The subroutine should return an reference to an array
which contains the appropriate number of bind values, or return an
undef if there is no more data to execute.
As a convenience, the "ArrayTupleFetch" attribute can also be used to
specify a statement handle. In which case the fetchrow_arrayref()
method will be called on the given statement handle in order to provide
the bind values for each tuple execution.
The values specified via bind_param_array() or the @bind_values
parameter may be either scalars, or arrayrefs. If any @bind_values are
given, then "execute_array" will effectively call "bind_param_array"
for each value before executing the statement. Values bound in this
way are usually treated as "SQL_VARCHAR" types unless the driver can
determine the correct type (which is rare), or unless "bind_param",
"bind_param_inout", "bind_param_array", or "bind_param_inout_array" has
already been used to specify the type. See "bind_param_array" for
details.
The "ArrayTupleStatus" attribute can be used to specify a reference to
an array which will receive the execute status of each executed
parameter tuple. Note the "ArrayTupleStatus" attribute was mandatory
until DBI 1.38.
For tuples which are successfully executed, the element at the same
ordinal position in the status array is the resulting rowcount (or -1
if unknown). If the execution of a tuple causes an error, then the
corresponding status array element will be set to a reference to an
array containing "err", "errstr" and "state" set by the failed
execution.
If any tuple execution returns an error, "execute_array" will return
"undef". In that case, the application should inspect the status array
to determine which parameter tuples failed. Some databases may not
continue executing tuples beyond the first failure. In this case the
status array will either hold fewer elements, or the elements beyond
the failure will be undef.
If all parameter tuples are successfully executed, "execute_array"
returns the number tuples executed. If no tuples were executed, then
execute_array() returns "0E0", just like execute() does, which Perl
will treat as 0 but will regard as true.
For example:
$sth = $dbh->prepare("INSERT INTO staff (first_name, last_name) VALUES (?, ?)");
my $tuples = $sth->execute_array(
{ ArrayTupleStatus => \my @tuple_status },
\@first_names,
\@last_names,
);
if ($tuples) {
print "Successfully inserted $tuples records\n";
}
else {
for my $tuple (0..@last_names-1) {
my $status = $tuple_status[$tuple];
$status = [0, "Skipped"] unless defined $status;
next unless ref $status;
printf "Failed to insert (%s, %s): %s\n",
$first_names[$tuple], $last_names[$tuple], $status->[1];
}
}
Support for data returning statements such as SELECT is driver-specific
and subject to change. At present, the default implementation provided
by DBI only supports non-data returning statements.
Transaction semantics when using array binding are driver and database
specific. If "AutoCommit" is on, the default DBI implementation will
cause each parameter tuple to be individually committed (or rolled back
in the event of an error). If "AutoCommit" is off, the application is
responsible for explicitly committing the entire set of bound parameter
tuples. Note that different drivers and databases may have different
behaviours when some parameter tuples cause failures. In some cases,
the driver or database may automatically rollback the effect of all
prior parameter tuples that succeeded in the transaction; other drivers
or databases may retain the effect of prior successfully executed
parameter tuples. Be sure to check your driver and database for its
specific behaviour.
Note that, in general, performance will usually be better with
"AutoCommit" turned off, and using explicit "commit" after each
"execute_array" call.
The "execute_array" method was added in DBI 1.22, and ArrayTupleFetch
was added in 1.36.
"execute_for_fetch"
$tuples = $sth->execute_for_fetch($fetch_tuple_sub);
$tuples = $sth->execute_for_fetch($fetch_tuple_sub, \@tuple_status);
($tuples, $rows) = $sth->execute_for_fetch($fetch_tuple_sub);
($tuples, $rows) = $sth->execute_for_fetch($fetch_tuple_sub, \@tuple_status);
The execute_for_fetch() method is used to perform bulk operations and
although it is most often used via the execute_array() method you can
use it directly. The main difference between execute_array and
execute_for_fetch is the former does column or row-wise binding and the
latter uses row-wise binding.
The fetch subroutine, referenced by $fetch_tuple_sub, is expected to
return a reference to an array (known as a 'tuple') or undef.
The execute_for_fetch() method calls $fetch_tuple_sub, without any
parameters, until it returns a false value. Each tuple returned is used
to provide bind values for an $sth->execute(@$tuple) call.
In scalar context execute_for_fetch() returns "undef" if there were any
errors and the number of tuples executed otherwise. Like execute() and
execute_array() a zero is returned as "0E0" so execute_for_fetch() is
only false on error. If there were any errors the @tuple_status array
can be used to discover which tuples failed and with what errors.
When called in list context execute_for_fetch() returns two scalars;
$tuples is the same as calling execute_for_fetch() in scalar context
and $rows is the sum of the number of rows affected for each tuple, if
available or -1 if the driver cannot determine this. If you are doing
an update operation the returned rows affected may not be what you
expect if, for instance, one or more of the tuples affected the same
row multiple times. Some drivers may not yet support list context, in
which case $rows will be undef, or may not be able to provide the
number of rows affected when performing this batch operation, in which
case $rows will be -1.
If \@tuple_status is passed then the execute_for_fetch method uses it
to return status information. The tuple_status array holds one element
per tuple. If the corresponding execute() did not fail then the element
holds the return value from execute(), which is typically a row count.
If the execute() did fail then the element holds a reference to an
array containing ($sth->err, $sth->errstr, $sth->state).
If the driver detects an error that it knows means no further tuples
can be executed then it may return, with an error status, even though
$fetch_tuple_sub may still have more tuples to be executed.
Although each tuple returned by $fetch_tuple_sub is effectively used to
call $sth->execute(@$tuple_array_ref) the exact timing may vary.
Drivers are free to accumulate sets of tuples to pass to the database
server in bulk group operations for more efficient execution. However,
the $fetch_tuple_sub is specifically allowed to return the same array
reference each time (which is what fetchrow_arrayref() usually does).
For example:
my $sel = $dbh1->prepare("select foo, bar from table1");
$sel->execute;
my $ins = $dbh2->prepare("insert into table2 (foo, bar) values (?,?)");
my $fetch_tuple_sub = sub { $sel->fetchrow_arrayref };
my @tuple_status;
$rc = $ins->execute_for_fetch($fetch_tuple_sub, \@tuple_status);
my @errors = grep { ref $_ } @tuple_status;
Similarly, if you already have an array containing the data rows to be
processed you'd use a subroutine to shift off and return each array ref
in turn:
$ins->execute_for_fetch( sub { shift @array_of_arrays }, \@tuple_status);
The "execute_for_fetch" method was added in DBI 1.38.
"last_insert_id"
$rv = $sth->last_insert_id();
$rv = $sth->last_insert_id($catalog, $schema, $table, $field);
$rv = $sth->last_insert_id($catalog, $schema, $table, $field, \%attr);
Returns a value 'identifying' the row inserted by last execution of the
statement $sth, if possible.
For some drivers the value may be 'identifying' the row inserted by the
last executed statement, not by $sth.
See database handle method last_insert_id for all details.
The "last_insert_id" statement method was added in DBI 1.642.
"fetchrow_arrayref"
$ary_ref = $sth->fetchrow_arrayref;
$ary_ref = $sth->fetch; # alias
Fetches the next row of data and returns a reference to an array
holding the field values. Null fields are returned as "undef" values
in the array. This is the fastest way to fetch data, particularly if
used with "$sth->bind_columns".
If there are no more rows or if an error occurs, then
"fetchrow_arrayref" returns an "undef". You should check "$sth->err"
afterwards (or use the "RaiseError" attribute) to discover if the
"undef" returned was due to an error.
Note that the same array reference is returned for each fetch, so don't
store the reference and then use it after a later fetch. Also, the
elements of the array are also reused for each row, so take care if you
want to take a reference to an element. See also "bind_columns".
"fetchrow_array"
@ary = $sth->fetchrow_array;
An alternative to "fetchrow_arrayref". Fetches the next row of data and
returns it as a list containing the field values. Null fields are
returned as "undef" values in the list.
If there are no more rows or if an error occurs, then "fetchrow_array"
returns an empty list. You should check "$sth->err" afterwards (or use
the "RaiseError" attribute) to discover if the empty list returned was
due to an error.
If called in a scalar context for a statement handle that has more than
one column, it is undefined whether the driver will return the value of
the first column or the last. So don't do that. Also, in a scalar
context, an "undef" is returned if there are no more rows or if an
error occurred. That "undef" can't be distinguished from an "undef"
returned because the first field value was NULL. For these reasons you
should exercise some caution if you use "fetchrow_array" in a scalar
context.
"fetchrow_hashref"
$hash_ref = $sth->fetchrow_hashref;
$hash_ref = $sth->fetchrow_hashref($name);
An alternative to "fetchrow_arrayref". Fetches the next row of data and
returns it as a reference to a hash containing field name and field
value pairs. Null fields are returned as "undef" values in the hash.
If there are no more rows or if an error occurs, then
"fetchrow_hashref" returns an "undef". You should check "$sth->err"
afterwards (or use the "RaiseError" attribute) to discover if the
"undef" returned was due to an error.
The optional $name parameter specifies the name of the statement handle
attribute. For historical reasons it defaults to ""NAME"", however
using either ""NAME_lc"" or ""NAME_uc"" is recommended for portability.
The keys of the hash are the same names returned by "$sth->{$name}". If
more than one field has the same name, there will only be one entry in
the returned hash for those fields, so statements like ""select foo,
foo from bar"" will return only a single key from "fetchrow_hashref".
In these cases use column aliases or "fetchrow_arrayref". Note that it
is the database server (and not the DBD implementation) which provides
the name for fields containing functions like "count(*)" or
""max(c_foo)"" and they may clash with existing column names (most
databases don't care about duplicate column names in a result-set). If
you want these to return as unique names that are the same across
databases, use aliases, as in ""select count(*) as cnt"" or ""select
max(c_foo) mx_foo, ..."" depending on the syntax your database
supports.
Because of the extra work "fetchrow_hashref" and Perl have to perform,
it is not as efficient as "fetchrow_arrayref" or "fetchrow_array".
By default a reference to a new hash is returned for each row. It is
likely that a future version of the DBI will support an attribute which
will enable the same hash to be reused for each row. This will give a
significant performance boost, but it won't be enabled by default
because of the risk of breaking old code.
"fetchall_arrayref"
$tbl_ary_ref = $sth->fetchall_arrayref;
$tbl_ary_ref = $sth->fetchall_arrayref( $slice );
$tbl_ary_ref = $sth->fetchall_arrayref( $slice, $max_rows );
The "fetchall_arrayref" method can be used to fetch all the data to be
returned from a prepared and executed statement handle. It returns a
reference to an array that contains one reference per row.
If called on an inactive statement handle, "fetchall_arrayref" returns
undef.
If there are no rows left to return from an active statement handle,
"fetchall_arrayref" returns a reference to an empty array. If an error
occurs, "fetchall_arrayref" returns the data fetched thus far, which
may be none. You should check "$sth->err" afterwards (or use the
"RaiseError" attribute) to discover if the data is complete or was
truncated due to an error.
If $slice is an array reference, "fetchall_arrayref" uses
"fetchrow_arrayref" to fetch each row as an array ref. If the $slice
array is not empty then it is used as a slice to select individual
columns by perl array index number (starting at 0, unlike column and
parameter numbers which start at 1).
With no parameters, or if $slice is undefined, "fetchall_arrayref" acts
as if passed an empty array ref.
For example, to fetch just the first column of every row:
$tbl_ary_ref = $sth->fetchall_arrayref([0]);
To fetch the second to last and last column of every row:
$tbl_ary_ref = $sth->fetchall_arrayref([-2,-1]);
Those two examples both return a reference to an array of array refs.
If $slice is a hash reference, "fetchall_arrayref" fetches each row as
a hash reference. If the $slice hash is empty then the keys in the
hashes have whatever name lettercase is returned by default. (See
"FetchHashKeyName" attribute.) If the $slice hash is not empty, then it
is used as a slice to select individual columns by name. The values of
the hash should be set to 1. The key names of the returned hashes
match the letter case of the names in the parameter hash, regardless of
the "FetchHashKeyName" attribute.
For example, to fetch all fields of every row as a hash ref:
$tbl_ary_ref = $sth->fetchall_arrayref({});
To fetch only the fields called "foo" and "bar" of every row as a hash
ref (with keys named "foo" and "BAR", regardless of the original
capitalization):
$tbl_ary_ref = $sth->fetchall_arrayref({ foo=>1, BAR=>1 });
Those two examples both return a reference to an array of hash refs.
If $slice is a reference to a hash reference, that hash is used to
select and rename columns. The keys are 0-based column index numbers
and the values are the corresponding keys for the returned row hashes.
For example, to fetch only the first and second columns of every row as
a hash ref (with keys named "k" and "v" regardless of their original
names):
$tbl_ary_ref = $sth->fetchall_arrayref( \{ 0 => 'k', 1 => 'v' } );
If $max_rows is defined and greater than or equal to zero then it is
used to limit the number of rows fetched before returning.
fetchall_arrayref() can then be called again to fetch more rows. This
is especially useful when you need the better performance of
fetchall_arrayref() but don't have enough memory to fetch and return
all the rows in one go.
Here's an example (assumes RaiseError is enabled):
my $rows = []; # cache for batches of rows
while( my $row = ( shift(@$rows) || # get row from cache, or reload cache:
shift(@{$rows=$sth->fetchall_arrayref(undef,10_000)||[]}) )
) {
...
}
That might be the fastest way to fetch and process lots of rows using
the DBI, but it depends on the relative cost of method calls vs memory
allocation.
A standard "while" loop with column binding is often faster because the
cost of allocating memory for the batch of rows is greater than the
saving by reducing method calls. It's possible that the DBI may provide
a way to reuse the memory of a previous batch in future, which would
then shift the balance back towards fetchall_arrayref().
"fetchall_hashref"
$hash_ref = $sth->fetchall_hashref($key_field);
The "fetchall_hashref" method can be used to fetch all the data to be
returned from a prepared and executed statement handle. It returns a
reference to a hash containing a key for each distinct value of the
$key_field column that was fetched. For each key the corresponding
value is a reference to a hash containing all the selected columns and
their values, as returned by "fetchrow_hashref()".
If there are no rows to return, "fetchall_hashref" returns a reference
to an empty hash. If an error occurs, "fetchall_hashref" returns the
data fetched thus far, which may be none. You should check "$sth->err"
afterwards (or use the "RaiseError" attribute) to discover if the data
is complete or was truncated due to an error.
The $key_field parameter provides the name of the field that holds the
value to be used for the key for the returned hash. For example:
$dbh->{FetchHashKeyName} = 'NAME_lc';
$sth = $dbh->prepare("SELECT FOO, BAR, ID, NAME, BAZ FROM TABLE");
$sth->execute;
$hash_ref = $sth->fetchall_hashref('id');
print "Name for id 42 is $hash_ref->{42}->{name}\n";
The $key_field parameter can also be specified as an integer column
number (counting from 1). If $key_field doesn't match any column in
the statement, as a name first then as a number, then an error is
returned.
For queries returning more than one 'key' column, you can specify
multiple column names by passing $key_field as a reference to an array
containing one or more key column names (or index numbers). For
example:
$sth = $dbh->prepare("SELECT foo, bar, baz FROM table");
$sth->execute;
$hash_ref = $sth->fetchall_hashref( [ qw(foo bar) ] );
print "For foo 42 and bar 38, baz is $hash_ref->{42}->{38}->{baz}\n";
The fetchall_hashref() method is normally used only where the key
fields values for each row are unique. If multiple rows are returned
with the same values for the key fields then later rows overwrite
earlier ones.
"more_results"
... not yet documented ...
"finish"
$rc = $sth->finish;
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed. You almost certainly
do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch
errors.
When all the data has been fetched from a "SELECT" statement, the
driver will automatically call "finish" for you. So you should not call
it explicitly except when you know that you've not fetched all the data
from a statement handle and the handle won't be destroyed soon.
The most common example is when you only want to fetch just one row,
but in that case the "selectrow_*" methods are usually better anyway.
Consider a query like:
SELECT foo FROM table WHERE bar=? ORDER BY baz
on a very large table. When executed, the database server will have to
use temporary buffer space to store the sorted rows. If, after
executing the handle and selecting just a few rows, the handle won't be
re-executed for some time and won't be destroyed, the "finish" method
can be used to tell the server that the buffer space can be freed.
Calling "finish" resets the "Active" attribute for the statement. It
may also make some statement handle attributes (such as "NAME" and
"TYPE") unavailable if they have not already been accessed (and thus
cached).
The "finish" method does not affect the transaction status of the
database connection. It has nothing to do with transactions. It's
mostly an internal "housekeeping" method that is rarely needed. See
also "disconnect" and the "Active" attribute.
The "finish" method should have been called "discard_pending_rows".
"rows"
$rv = $sth->rows;
Returns the number of rows affected by the last row affecting command,
or -1 if the number of rows is not known or not available.
Generally, you can only rely on a row count after a non-"SELECT"
"execute" (for some specific operations like "UPDATE" and "DELETE"), or
after fetching all the rows of a "SELECT" statement.
For "SELECT" statements, it is generally not possible to know how many
rows will be returned except by fetching them all. Some drivers will
return the number of rows the application has fetched so far, but
others may return -1 until all rows have been fetched. So use of the
"rows" method or $DBI::rows with "SELECT" statements is not
recommended.
One alternative method to get a row count for a "SELECT" is to execute
a "SELECT COUNT(*) FROM ..." SQL statement with the same "..." as your
query and then fetch the row count from that.
"bind_col"
$rc = $sth->bind_col($column_number, \$var_to_bind);
$rc = $sth->bind_col($column_number, \$var_to_bind, \%attr );
$rc = $sth->bind_col($column_number, \$var_to_bind, $bind_type );
Binds a Perl variable and/or some attributes to an output column
(field) of a "SELECT" statement. Column numbers count up from 1. You
do not need to bind output columns in order to fetch data. For maximum
portability between drivers, bind_col() should be called after
execute() and not before. See also "bind_columns" for an example.
The binding is performed at a low level using Perl aliasing. Whenever
a row is fetched from the database $var_to_bind appears to be
automatically updated simply because it now refers to the same memory
location as the corresponding column value. This makes using bound
variables very efficient. Binding a tied variable doesn't work,
currently.
The "bind_param" method performs a similar, but opposite, function for
input variables.
Data Types for Column Binding
The "\%attr" parameter can be used to hint at the data type formatting
the column should have. For example, you can use:
$sth->bind_col(1, undef, { TYPE => SQL_DATETIME });
to specify that you'd like the column (which presumably is some kind of
datetime type) to be returned in the standard format for SQL_DATETIME,
which is 'YYYY-MM-DD HH:MM:SS', rather than the native formatting the
database would normally use.
There's no $var_to_bind in that example to emphasize the point that
bind_col() works on the underlying column and not just a particular
bound variable.
As a short-cut for the common case, the data type can be passed
directly, in place of the "\%attr" hash reference. This example is
equivalent to the one above:
$sth->bind_col(1, undef, SQL_DATETIME);
The "TYPE" value indicates the standard (non-driver-specific) type for
this parameter. To specify the driver-specific type, the driver may
support a driver-specific attribute, such as "{ ora_type => 97 }".
The SQL_DATETIME and other related constants can be imported using
use DBI qw(:sql_types);
See "DBI Constants" for more information.
Few drivers support specifying a data type via a "bind_col" call (most
will simply ignore the data type). Fewer still allow the data type to
be altered once set. If you do set a column type the type should remain
sticky through further calls to bind_col for the same column if the
type is not overridden (this is important for instance when you are
using a slice in fetchall_arrayref).
The TYPE attribute for bind_col() was first specified in DBI 1.41.
From DBI 1.611, drivers can use the "TYPE" attribute to attempt to cast
the bound scalar to a perl type which more closely matches "TYPE". At
present DBI supports "SQL_INTEGER", "SQL_DOUBLE" and "SQL_NUMERIC". See
"sql_type_cast" for details of how types are cast.
Other attributes for Column Binding
The "\%attr" parameter may also contain the following attributes:
"StrictlyTyped"
If a "TYPE" attribute is passed to bind_col, then the driver will
attempt to change the bound perl scalar to match the type more
closely. If the bound value cannot be cast to the requested "TYPE"
then by default it is left untouched and no error is generated. If
you specify "StrictlyTyped" as 1 and the cast fails, this will
generate an error.
This attribute was first added in DBI 1.611. When 1.611 was
released few drivers actually supported this attribute but
DBD::Oracle and DBD::ODBC should from versions 1.24.
"DiscardString"
When the "TYPE" attribute is passed to "bind_col" and the driver
successfully casts the bound perl scalar to a non-string type then
if "DiscardString" is set to 1, the string portion of the scalar
will be discarded. By default, "DiscardString" is not set.
This attribute was first added in DBI 1.611. When 1.611 was
released few drivers actually supported this attribute but
DBD::Oracle and DBD::ODBC should from versions 1.24.
"bind_columns"
$rc = $sth->bind_columns(@list_of_refs_to_vars_to_bind);
Calls "bind_col" for each column of the "SELECT" statement.
The list of references should have the same number of elements as the
number of columns in the "SELECT" statement. If it doesn't then
"bind_columns" will bind the elements given, up to the number of
columns, and then return an error.
For maximum portability between drivers, bind_columns() should be
called after execute() and not before.
For example:
$dbh->{RaiseError} = 1; # do this, or check every call for errors
$sth = $dbh->prepare(q{ SELECT region, sales FROM sales_by_region });
$sth->execute;
my ($region, $sales);
# Bind Perl variables to columns:
$rv = $sth->bind_columns(\$region, \$sales);
# you can also use Perl's \(...) syntax (see perlref docs):
# $sth->bind_columns(\($region, $sales));
# Column binding is the most efficient way to fetch data
while ($sth->fetch) {
print "$region: $sales\n";
}
For compatibility with old scripts, the first parameter will be ignored
if it is "undef" or a hash reference.
Here's a more fancy example that binds columns to the values inside a
hash (thanks to H.Merijn Brand):
$sth->execute;
my %row;
$sth->bind_columns( \( @row{ @{$sth->{NAME_lc} } } ));
while ($sth->fetch) {
print "$row{region}: $row{sales}\n";
}
"dump_results"
$rows = $sth->dump_results($maxlen, $lsep, $fsep, $fh);
Fetches all the rows from $sth, calls "DBI::neat_list" for each row,
and prints the results to $fh (defaults to "STDOUT") separated by $lsep
(default "\n"). $fsep defaults to ", " and $maxlen defaults to 35.
This method is designed as a handy utility for prototyping and testing
queries. Since it uses "neat_list" to format and edit the string for
reading by humans, it is not recommended for data transfer
applications.
Statement Handle Attributes
This section describes attributes specific to statement handles. Most
of these attributes are read-only.
Changes to these statement handle attributes do not affect any other
existing or future statement handles.
Attempting to set or get the value of an unknown attribute generates a
warning, except for private driver specific attributes (which all have
names starting with a lowercase letter).
Example:
... = $h->{NUM_OF_FIELDS}; # get/read
Some drivers cannot provide valid values for some or all of these
attributes until after "$sth->execute" has been successfully called.
Typically the attribute will be "undef" in these situations.
Some attributes, like NAME, are not appropriate to some types of
statement, like SELECT. Typically the attribute will be "undef" in
these situations.
For drivers which support stored procedures and multiple result sets
(see "more_results") these attributes relate to the current result set.
See also "finish" to learn more about the effect it may have on some
attributes.
"NUM_OF_FIELDS"
Type: integer, read-only
Number of fields (columns) in the data the prepared statement may
return. Statements that don't return rows of data, like "DELETE" and
"CREATE" set "NUM_OF_FIELDS" to 0 (though it may be undef in some
drivers).
"NUM_OF_PARAMS"
Type: integer, read-only
The number of parameters (placeholders) in the prepared statement. See
SUBSTITUTION VARIABLES below for more details.
"NAME"
Type: array-ref, read-only
Returns a reference to an array of field names for each column. The
names may contain spaces but should not be truncated or have any
trailing space. Note that the names have the letter case (upper, lower
or mixed) as returned by the driver being used. Portable applications
should use "NAME_lc" or "NAME_uc".
print "First column name: $sth->{NAME}->[0]\n";
Also note that the name returned for (aggregate) functions like
count(*) or "max(c_foo)" is determined by the database server and not
by "DBI" or the "DBD" backend.
"NAME_lc"
Type: array-ref, read-only
Like "/NAME" but always returns lowercase names.
"NAME_uc"
Type: array-ref, read-only
Like "/NAME" but always returns uppercase names.
"NAME_hash"
Type: hash-ref, read-only
"NAME_lc_hash"
Type: hash-ref, read-only
"NAME_uc_hash"
Type: hash-ref, read-only
The "NAME_hash", "NAME_lc_hash", and "NAME_uc_hash" attributes return
column name information as a reference to a hash.
The keys of the hash are the names of the columns. The letter case of
the keys corresponds to the letter case returned by the "NAME",
"NAME_lc", and "NAME_uc" attributes respectively (as described above).
The value of each hash entry is the perl index number of the
corresponding column (counting from 0). For example:
$sth = $dbh->prepare("select Id, Name from table");
$sth->execute;
@row = $sth->fetchrow_array;
print "Name $row[ $sth->{NAME_lc_hash}{name} ]\n";
"TYPE"
Type: array-ref, read-only
Returns a reference to an array of integer values for each column. The
value indicates the data type of the corresponding column.
The values correspond to the international standards (ANSI X3.135 and
ISO/IEC 9075) which, in general terms, means ODBC. Driver-specific
types that don't exactly match standard types should generally return
the same values as an ODBC driver supplied by the makers of the
database. That might include private type numbers in ranges the vendor
has officially registered with the ISO working group:
ftp://sqlstandards.org/SC32/SQL_Registry/
Where there's no vendor-supplied ODBC driver to be compatible with, the
DBI driver can use type numbers in the range that is now officially
reserved for use by the DBI: -9999 to -9000.
All possible values for "TYPE" should have at least one entry in the
output of the "type_info_all" method (see "type_info_all").
"PRECISION"
Type: array-ref, read-only
Returns a reference to an array of integer values for each column.
For numeric columns, the value is the maximum number of digits (without
considering a sign character or decimal point). Note that the "display
size" for floating point types (REAL, FLOAT, DOUBLE) can be up to 7
characters greater than the precision (for the sign + decimal point +
the letter E + a sign + 2 or 3 digits).
For any character type column the value is the OCTET_LENGTH, in other
words the number of bytes, not characters.
(More recent standards refer to this as COLUMN_SIZE but we stick with
PRECISION for backwards compatibility.)
"SCALE"
Type: array-ref, read-only
Returns a reference to an array of integer values for each column.
NULL ("undef") values indicate columns where scale is not applicable.
"NULLABLE"
Type: array-ref, read-only
Returns a reference to an array indicating the possibility of each
column returning a null. Possible values are 0 (or an empty string) =
no, 1 = yes, 2 = unknown.
print "First column may return NULL\n" if $sth->{NULLABLE}->[0];
"CursorName"
Type: string, read-only
Returns the name of the cursor associated with the statement handle, if
available. If not available or if the database driver does not support
the "where current of ..." SQL syntax, then it returns "undef".
"Database"
Type: dbh, read-only
Returns the parent $dbh of the statement handle.
"Statement"
Type: string, read-only
Returns the statement string passed to the "prepare" method.
"ParamValues"
Type: hash ref, read-only
Returns a reference to a hash containing the values currently bound to
placeholders. The keys of the hash are the 'names' of the
placeholders, typically integers starting at 1. Returns undef if not
supported by the driver.
See "ShowErrorStatement" for an example of how this is used.
* Keys:
If the driver supports "ParamValues" but no values have been bound yet
then the driver should return a hash with placeholders names in the
keys but all the values undef, but some drivers may return a ref to an
empty hash because they can't pre-determine the names.
It is possible that the keys in the hash returned by "ParamValues" are
not exactly the same as those implied by the prepared statement. For
example, DBD::Oracle translates '"?"' placeholders into '":pN"' where N
is a sequence number starting at 1.
* Values:
It is possible that the values in the hash returned by "ParamValues"
are not exactly the same as those passed to bind_param() or execute().
The driver may have slightly modified values in some way based on the
TYPE the value was bound with. For example a floating point value bound
as an SQL_INTEGER type may be returned as an integer. The values
returned by "ParamValues" can be passed to another bind_param() method
with the same TYPE and will be seen by the database as the same value.
See also "ParamTypes" below.
The "ParamValues" attribute was added in DBI 1.28.
"ParamTypes"
Type: hash ref, read-only
Returns a reference to a hash containing the type information currently
bound to placeholders. Returns undef if not supported by the driver.
* Keys:
See "ParamValues" above.
* Values:
The hash values are hashrefs of type information in the same form as
that passed to the various bind_param() methods (See "bind_param" for
the format and values).
It is possible that the values in the hash returned by "ParamTypes" are
not exactly the same as those passed to bind_param() or execute().
Param attributes specified using the abbreviated form, like this:
$sth->bind_param(1, SQL_INTEGER);
are returned in the expanded form, as if called like this:
$sth->bind_param(1, { TYPE => SQL_INTEGER });
The driver may have modified the type information in some way based on
the bound values, other hints provided by the prepare()'d SQL
statement, or alternate type mappings required by the driver or target
database system. The driver may also add private keys (with names
beginning with the drivers reserved prefix, e.g., odbc_xxx).
* Example:
The keys and values in the returned hash can be passed to the various
bind_param() methods to effectively reproduce a previous param binding.
For example:
# assuming $sth1 is a previously prepared statement handle
my $sth2 = $dbh->prepare( $sth1->{Statement} );
my $ParamValues = $sth1->{ParamValues} || {};
my $ParamTypes = $sth1->{ParamTypes} || {};
$sth2->bind_param($_, $ParamValues->{$_}, $ParamTypes->{$_})
for keys %{ {%$ParamValues, %$ParamTypes} };
$sth2->execute();
The "ParamTypes" attribute was added in DBI 1.49. Implementation is the
responsibility of individual drivers; the DBI layer default
implementation simply returns undef.
"ParamArrays"
Type: hash ref, read-only
Returns a reference to a hash containing the values currently bound to
placeholders with "execute_array" or "bind_param_array". The keys of
the hash are the 'names' of the placeholders, typically integers
starting at 1. Returns undef if not supported by the driver or no
arrays of parameters are bound.
Each key value is an array reference containing a list of the bound
parameters for that column.
For example:
$sth = $dbh->prepare("INSERT INTO staff (id, name) values (?,?)");
$sth->execute_array({},[1,2], ['fred','dave']);
if ($sth->{ParamArrays}) {
foreach $param (keys %{$sth->{ParamArrays}}) {
printf "Parameters for %s : %s\n", $param,
join(",", @{$sth->{ParamArrays}->{$param}});
}
}
It is possible that the values in the hash returned by "ParamArrays"
are not exactly the same as those passed to "bind_param_array" or
"execute_array". The driver may have slightly modified values in some
way based on the TYPE the value was bound with. For example a floating
point value bound as an SQL_INTEGER type may be returned as an integer.
It is also possible that the keys in the hash returned by "ParamArrays"
are not exactly the same as those implied by the prepared statement.
For example, DBD::Oracle translates '"?"' placeholders into '":pN"'
where N is a sequence number starting at 1.
"RowsInCache"
Type: integer, read-only
If the driver supports a local row cache for "SELECT" statements, then
this attribute holds the number of un-fetched rows in the cache. If the
driver doesn't, then it returns "undef". Note that some drivers pre-
fetch rows on execute, whereas others wait till the first fetch.
See also the "RowCacheSize" database handle attribute.
FURTHER INFORMATION
Catalog Methods
An application can retrieve metadata information from the DBMS by
issuing appropriate queries on the views of the Information Schema.
Unfortunately, "INFORMATION_SCHEMA" views are seldom supported by the
DBMS. Special methods (catalog methods) are available to return result
sets for a small but important portion of that metadata:
column_info
foreign_key_info
primary_key_info
table_info
statistics_info
All catalog methods accept arguments in order to restrict the result
sets. Passing "undef" to an optional argument does not constrain the
search for that argument. However, an empty string ('') is treated as
a regular search criteria and will only match an empty value.
Note: SQL/CLI and ODBC differ in the handling of empty strings. An
empty string will not restrict the result set in SQL/CLI.
Most arguments in the catalog methods accept only ordinary values, e.g.
the arguments of "primary_key_info()". Such arguments are treated as a
literal string, i.e. the case is significant and quote characters are
taken literally.
Some arguments in the catalog methods accept search patterns (strings
containing '_' and/or '%'), e.g. the $table argument of
"column_info()". Passing '%' is equivalent to leaving the argument
"undef".
Caveat: The underscore ('_') is valid and often used in SQL
identifiers. Passing such a value to a search pattern argument may
return more rows than expected! To include pattern characters as
literals, they must be preceded by an escape character which can be
achieved with
$esc = $dbh->get_info( 14 ); # SQL_SEARCH_PATTERN_ESCAPE
$search_pattern =~ s/([_%])/$esc$1/g;
The ODBC and SQL/CLI specifications define a way to change the default
behaviour described above: All arguments (except list value arguments)
are treated as identifier if the "SQL_ATTR_METADATA_ID" attribute is
set to "SQL_TRUE". Quoted identifiers are very similar to ordinary
values, i.e. their body (the string within the quotes) is interpreted
literally. Unquoted identifiers are compared in UPPERCASE.
The DBI (currently) does not support the "SQL_ATTR_METADATA_ID"
attribute, i.e. it behaves like an ODBC driver where
"SQL_ATTR_METADATA_ID" is set to "SQL_FALSE".
Transactions
Transactions are a fundamental part of any robust database system. They
protect against errors and database corruption by ensuring that sets of
related changes to the database take place in atomic (indivisible, all-
or-nothing) units.
This section applies to databases that support transactions and where
"AutoCommit" is off. See "AutoCommit" for details of using
"AutoCommit" with various types of databases.
The recommended way to implement robust transactions in Perl
applications is to enable "RaiseError" and catch the error that's
'thrown' as an exception. For example, using Try::Tiny:
use Try::Tiny;
$dbh->{AutoCommit} = 0; # enable transactions, if possible
$dbh->{RaiseError} = 1;
try {
foo(...) # do lots of work here
bar(...) # including inserts
baz(...) # and updates
$dbh->commit; # commit the changes if we get this far
} catch {
warn "Transaction aborted because $_"; # Try::Tiny copies $@ into $_
# now rollback to undo the incomplete changes
# but do it in an eval{} as it may also fail
eval { $dbh->rollback };
# add other application on-error-clean-up code here
};
If the "RaiseError" attribute is not set, then DBI calls would need to
be manually checked for errors, typically like this:
$h->method(@args) or die $h->errstr;
With "RaiseError" set, the DBI will automatically "die" if any DBI
method call on that handle (or a child handle) fails, so you don't have
to test the return value of each method call. See "RaiseError" for more
details.
A major advantage of the "eval" approach is that the transaction will
be properly rolled back if any code (not just DBI calls) in the inner
application dies for any reason. The major advantage of using the
"$h->{RaiseError}" attribute is that all DBI calls will be checked
automatically. Both techniques are strongly recommended.
After calling "commit" or "rollback" many drivers will not let you
fetch from a previously active "SELECT" statement handle that's a child
of the same database handle. A typical way round this is to connect the
the database twice and use one connection for "SELECT" statements.
See "AutoCommit" and "disconnect" for other important information about
transactions.
Handling BLOB / LONG / Memo Fields
Many databases support "blob" (binary large objects), "long", or
similar datatypes for holding very long strings or large amounts of
binary data in a single field. Some databases support variable length
long values over 2,000,000,000 bytes in length.
Since values of that size can't usually be held in memory, and because
databases can't usually know in advance the length of the longest long
that will be returned from a "SELECT" statement (unlike other data
types), some special handling is required.
In this situation, the value of the "$h->{LongReadLen}" attribute is
used to determine how much buffer space to allocate when fetching such
fields. The "$h->{LongTruncOk}" attribute is used to determine how to
behave if a fetched value can't fit into the buffer.
See the description of "LongReadLen" for more information.
When trying to insert long or binary values, placeholders should be
used since there are often limits on the maximum size of an "INSERT"
statement and the "quote" method generally can't cope with binary data.
See "Placeholders and Bind Values".
Simple Examples
Here's a complete example program to select and fetch some data:
my $data_source = "dbi::DriverName:db_name";
my $dbh = DBI->connect($data_source, $user, $password)
or die "Can't connect to $data_source: $DBI::errstr";
my $sth = $dbh->prepare( q{
SELECT name, phone
FROM mytelbook
}) or die "Can't prepare statement: $DBI::errstr";
my $rc = $sth->execute
or die "Can't execute statement: $DBI::errstr";
print "Query will return $sth->{NUM_OF_FIELDS} fields.\n\n";
print "Field names: @{ $sth->{NAME} }\n";
while (($name, $phone) = $sth->fetchrow_array) {
print "$name: $phone\n";
}
# check for problems which may have terminated the fetch early
die $sth->errstr if $sth->err;
$dbh->disconnect;
Here's a complete example program to insert some data from a file.
(This example uses "RaiseError" to avoid needing to check each call).
my $dbh = DBI->connect("dbi:DriverName:db_name", $user, $password, {
RaiseError => 1, AutoCommit => 0
});
my $sth = $dbh->prepare( q{
INSERT INTO table (name, phone) VALUES (?, ?)
});
open FH, "<phone.csv" or die "Unable to open phone.csv: $!";
while (<FH>) {
chomp;
my ($name, $phone) = split /,/;
$sth->execute($name, $phone);
}
close FH;
$dbh->commit;
$dbh->disconnect;
Here's how to convert fetched NULLs (undefined values) into empty
strings:
while($row = $sth->fetchrow_arrayref) {
# this is a fast and simple way to deal with nulls:
foreach (@$row) { $_ = '' unless defined }
print "@$row\n";
}
The "q{...}" style quoting used in these examples avoids clashing with
quotes that may be used in the SQL statement. Use the double-quote like
"qq{...}" operator if you want to interpolate variables into the
string. See "Quote and Quote-like Operators" in perlop for more
details.
Threads and Thread Safety
Perl 5.7 and later support a new threading model called iThreads. (The
old "5.005 style" threads are not supported by the DBI.)
In the iThreads model each thread has its own copy of the perl
interpreter. When a new thread is created the original perl
interpreter is 'cloned' to create a new copy for the new thread.
If the DBI and drivers are loaded and handles created before the thread
is created then it will get a cloned copy of the DBI, the drivers and
the handles.
However, the internal pointer data within the handles will refer to the
DBI and drivers in the original interpreter. Using those handles in the
new interpreter thread is not safe, so the DBI detects this and croaks
on any method call using handles that don't belong to the current
thread (except for DESTROY).
Because of this (possibly temporary) restriction, newly created threads
must make their own connections to the database. Handles can't be
shared across threads.
But BEWARE, some underlying database APIs (the code the DBD driver uses
to talk to the database, often supplied by the database vendor) are not
thread safe. If it's not thread safe, then allowing more than one
thread to enter the code at the same time may cause subtle/serious
problems. In some cases allowing more than one thread to enter the
code, even if not at the same time, can cause problems. You have been
warned.
Using DBI with perl threads is not yet recommended for production
environments. For more information see
<http://www.perlmonks.org/index.pl?node_id=288022>
Note: There is a bug in perl 5.8.2 when configured with threads and
debugging enabled (bug #24463) which would cause some DBI tests to
fail. These tests have been disabled for perl-5.8.2 and below.
Tests for inner method cache are disabled for perl-5.10.x
Signal Handling and Canceling Operations
[The following only applies to systems with unix-like signal handling.
I'd welcome additions for other systems, especially Windows.]
The first thing to say is that signal handling in Perl versions less
than 5.8 is not safe. There is always a small risk of Perl crashing
and/or core dumping when, or after, handling a signal because the
signal could arrive and be handled while internal data structures are
being changed. If the signal handling code used those same internal
data structures it could cause all manner of subtle and not-so-subtle
problems. The risk was reduced with 5.4.4 but was still present in all
perls up through 5.8.0.
Beginning in perl 5.8.0 perl implements 'safe' signal handling if your
system has the POSIX sigaction() routine. Now when a signal is
delivered perl just makes a note of it but does not run the %SIG
handler. The handling is 'deferred' until a 'safe' moment.
Although this change made signal handling safe, it also lead to a
problem with signals being deferred for longer than you'd like. If a
signal arrived while executing a system call, such as waiting for data
on a network connection, the signal is noted and then the system call
that was executing returns with an EINTR error code to indicate that it
was interrupted. All fine so far.
The problem comes when the code that made the system call sees the
EINTR code and decides it's going to call it again. Perl doesn't do
that, but database code sometimes does. If that happens then the signal
handler doesn't get called until later. Maybe much later.
Fortunately there are ways around this which we'll discuss below.
Unfortunately they make signals unsafe again.
The two most common uses of signals in relation to the DBI are for
canceling operations when the user types Ctrl-C (interrupt), and for
implementing a timeout using "alarm()" and $SIG{ALRM}.
Cancel
The DBI provides a "cancel" method for statement handles. The
"cancel" method should abort the current operation and is designed
to be called from a signal handler. For example:
$SIG{INT} = sub { $sth->cancel };
However, few drivers implement this (the DBI provides a default
method that just returns "undef") and, even if implemented, there
is still a possibility that the statement handle, and even the
parent database handle, will not be usable afterwards.
If "cancel" returns true, then it has successfully invoked the
database engine's own cancel function. If it returns false, then
"cancel" failed. If it returns "undef", then the database driver
does not have cancel implemented - very few do.
Timeout
The traditional way to implement a timeout is to set $SIG{ALRM} to
refer to some code that will be executed when an ALRM signal
arrives and then to call alarm($seconds) to schedule an ALRM signal
to be delivered $seconds in the future. For example:
my $failed;
eval {
local $SIG{ALRM} = sub { die "TIMEOUT\n" }; # N.B. \n required
eval {
alarm($seconds);
... code to execute with timeout here (which may die) ...
1;
} or $failed = 1;
# outer eval catches alarm that might fire JUST before this alarm(0)
alarm(0); # cancel alarm (if code ran fast)
die "$@" if $failed;
1;
} or $failed = 1;
if ( $failed ) {
if ( defined $@ and $@ eq "TIMEOUT\n" ) { ... }
else { ... } # some other error
}
The first (outer) eval is used to avoid the unlikely but possible
chance that the "code to execute" dies and the alarm fires before
it is cancelled. Without the outer eval, if this happened your
program will die if you have no ALRM handler or a non-local alarm
handler will be called.
Unfortunately, as described above, this won't always work as
expected, depending on your perl version and the underlying
database code.
With Oracle for instance (DBD::Oracle), if the system which hosts
the database is down the DBI->connect() call will hang for several
minutes before returning an error.
The solution on these systems is to use the "POSIX::sigaction()"
routine to gain low level access to how the signal handler is
installed.
The code would look something like this (for the DBD-Oracle connect()):
use POSIX qw(:signal_h);
my $mask = POSIX::SigSet->new( SIGALRM ); # signals to mask in the handler
my $action = POSIX::SigAction->new(
sub { die "connect timeout\n" }, # the handler code ref
$mask,
# not using (perl 5.8.2 and later) 'safe' switch or sa_flags
);
my $oldaction = POSIX::SigAction->new();
sigaction( SIGALRM, $action, $oldaction );
my $dbh;
my $failed;
eval {
eval {
alarm(5); # seconds before time out
$dbh = DBI->connect("dbi:Oracle:$dsn" ... );
1;
} or $failed = 1;
alarm(0); # cancel alarm (if connect worked fast)
die "$@\n" if $failed; # connect died
1;
} or $failed = 1;
sigaction( SIGALRM, $oldaction ); # restore original signal handler
if ( $failed ) {
if ( defined $@ and $@ eq "connect timeout\n" ) {...}
else { # connect died }
}
See previous example for the reasoning around the double eval.
Similar techniques can be used for canceling statement execution.
Unfortunately, this solution is somewhat messy, and it does not work
with perl versions less than perl 5.8 where "POSIX::sigaction()"
appears to be broken.
For a cleaner implementation that works across perl versions, see
Lincoln Baxter's Sys::SigAction module at Sys::SigAction. The
documentation for Sys::SigAction includes an longer discussion of this
problem, and a DBD::Oracle test script.
Be sure to read all the signal handling sections of the perlipc manual.
And finally, two more points to keep firmly in mind. Firstly, remember
that what we've done here is essentially revert to old style unsafe
handling of these signals. So do as little as possible in the handler.
Ideally just die(). Secondly, the handles in use at the time the signal
is handled may not be safe to use afterwards.
Subclassing the DBI
DBI can be subclassed and extended just like any other object oriented
module. Before we talk about how to do that, it's important to be
clear about the various DBI classes and how they work together.
By default "$dbh = DBI->connect(...)" returns a $dbh blessed into the
"DBI::db" class. And the "$dbh->prepare" method returns an $sth
blessed into the "DBI::st" class (actually it simply changes the last
four characters of the calling handle class to be "::st").
The leading '"DBI"' is known as the 'root class' and the extra '"::db"'
or '"::st"' are the 'handle type suffixes'. If you want to subclass the
DBI you'll need to put your overriding methods into the appropriate
classes. For example, if you want to use a root class of "MySubDBI"
and override the do(), prepare() and execute() methods, then your do()
and prepare() methods should be in the "MySubDBI::db" class and the
execute() method should be in the "MySubDBI::st" class.
To setup the inheritance hierarchy the @ISA variable in "MySubDBI::db"
should include "DBI::db" and the @ISA variable in "MySubDBI::st" should
include "DBI::st". The "MySubDBI" root class itself isn't currently
used for anything visible and so, apart from setting @ISA to include
"DBI", it can be left empty.
So, having put your overriding methods into the right classes, and
setup the inheritance hierarchy, how do you get the DBI to use them?
You have two choices, either a static method call using the name of
your subclass:
$dbh = MySubDBI->connect(...);
or specifying a "RootClass" attribute:
$dbh = DBI->connect(..., { RootClass => 'MySubDBI' });
If both forms are used then the attribute takes precedence.
The only differences between the two are that using an explicit
RootClass attribute will a) make the DBI automatically attempt to load
a module by that name if the class doesn't exist, and b) won't call
your MySubDBI::connect() method, if you have one.
When subclassing is being used then, after a successful new connect,
the DBI->connect method automatically calls:
$dbh->connected($dsn, $user, $pass, \%attr);
The default method does nothing. The call is made just to simplify any
post-connection setup that your subclass may want to perform. The
parameters are the same as passed to DBI->connect. If your subclass
supplies a connected method, it should be part of the MySubDBI::db
package.
One more thing to note: you must let the DBI do the handle creation.
If you want to override the connect() method in your *::dr class then
it must still call SUPER::connect to get a $dbh to work with.
Similarly, an overridden prepare() method in *::db must still call
SUPER::prepare to get a $sth. If you try to create your own handles
using bless() then you'll find the DBI will reject them with an "is not
a DBI handle (has no magic)" error.
Here's a brief example of a DBI subclass. A more thorough example can
be found in t/subclass.t in the DBI distribution.
package MySubDBI;
use strict;
use DBI;
our @ISA = qw(DBI);
package MySubDBI::db;
our @ISA = qw(DBI::db);
sub prepare {
my ($dbh, @args) = @_;
my $sth = $dbh->SUPER::prepare(@args)
or return;
$sth->{private_mysubdbi_info} = { foo => 'bar' };
return $sth;
}
package MySubDBI::st;
our @ISA = qw(DBI::st);
sub fetch {
my ($sth, @args) = @_;
my $row = $sth->SUPER::fetch(@args)
or return;
do_something_magical_with_row_data($row)
or return $sth->set_err(1234, "The magic failed", undef, "fetch");
return $row;
}
When calling a SUPER::method that returns a handle, be careful to check
the return value before trying to do other things with it in your
overridden method. This is especially important if you want to set a
hash attribute on the handle, as Perl's autovivification will bite you
by (in)conveniently creating an unblessed hashref, which your method
will then return with usually baffling results later on like the error
"dbih_getcom handle HASH(0xa4451a8) is not a DBI handle (has no magic".
It's best to check right after the call and return undef immediately on
error, just like DBI would and just like the example above.
If your method needs to record an error it should call the set_err()
method with the error code and error string, as shown in the example
above. The error code and error string will be recorded in the handle
and available via "$h->err" and $DBI::errstr etc. The set_err() method
always returns an undef or empty list as appropriate. Since your method
should nearly always return an undef or empty list as soon as an error
is detected it's handy to simply return what set_err() returns, as
shown in the example above.
If the handle has "RaiseError", "PrintError", or "HandleError" etc. set
then the set_err() method will honour them. This means that if
"RaiseError" is set then set_err() won't return in the normal way but
will 'throw an exception' that can be caught with an "eval" block.
You can stash private data into DBI handles via "$h->{private_..._*}".
See the entry under "ATTRIBUTES COMMON TO ALL HANDLES" for info and
important caveats.
Memory Leaks
When tracking down memory leaks using tools like Devel::Leak you'll
find that some DBI internals are reported as 'leaking' memory. This is
very unlikely to be a real leak. The DBI has various caches to improve
performance and the apparrent leaks are simply the normal operation of
these caches.
The most frequent sources of the apparrent leaks are "ChildHandles",
"prepare_cached" and "connect_cached".
For example
http://stackoverflow.com/questions/13338308/perl-dbi-memory-leak
Given how widely the DBI is used, you can rest assured that if a new
release of the DBI did have a real leak it would be discovered,
reported, and fixed immediately. The leak you're looking for is
probably elsewhere. Good luck!
TRACING
The DBI has a powerful tracing mechanism built in. It enables you to
see what's going on 'behind the scenes', both within the DBI and the
drivers you're using.
Trace Settings
Which details are written to the trace output is controlled by a
combination of a trace level, an integer from 0 to 15, and a set of
trace flags that are either on or off. Together these are known as the
trace settings and are stored together in a single integer. For normal
use you only need to set the trace level, and generally only to a value
between 1 and 4.
Each handle has its own trace settings, and so does the DBI. When you
call a method the DBI merges the handles settings into its own for the
duration of the call: the trace flags of the handle are OR'd into the
trace flags of the DBI, and if the handle has a higher trace level then
the DBI trace level is raised to match it. The previous DBI trace
settings are restored when the called method returns.
Trace Levels
Trace levels are as follows:
0 - Trace disabled.
1 - Trace top-level DBI method calls returning with results or errors.
2 - As above, adding tracing of top-level method entry with parameters.
3 - As above, adding some high-level information from the driver
and some internal information from the DBI.
4 - As above, adding more detailed information from the driver.
This is the first level to trace all the rows being fetched.
5 to 15 - As above but with more and more internal information.
Trace level 1 is best for a simple overview of what's happening. Trace
levels 2 thru 4 a good choice for general purpose tracing. Levels 5
and above are best reserved for investigating a specific problem, when
you need to see "inside" the driver and DBI.
The trace output is detailed and typically very useful. Much of the
trace output is formatted using the "neat" function, so strings in the
trace output may be edited and truncated by that function.
Trace Flags
Trace flags are used to enable tracing of specific activities within
the DBI and drivers. The DBI defines some trace flags and drivers can
define others. DBI trace flag names begin with a capital letter and
driver specific names begin with a lowercase letter, as usual.
Currently the DBI defines these trace flags:
ALL - turn on all DBI and driver flags (not recommended)
SQL - trace SQL statements executed
(not yet implemented in DBI but implemented in some DBDs)
CON - trace connection process
ENC - trace encoding (unicode translations etc)
(not yet implemented in DBI but implemented in some DBDs)
DBD - trace only DBD messages
(not implemented by all DBDs yet)
TXN - trace transactions
(not implemented in all DBDs yet)
The "parse_trace_flags" and "parse_trace_flag" methods are used to
convert trace flag names into the corresponding integer bit flags.
Enabling Trace
The "$h->trace" method sets the trace settings for a handle and
"DBI->trace" does the same for the DBI.
In addition to the "trace" method, you can enable the same trace
information, and direct the output to a file, by setting the
"DBI_TRACE" environment variable before starting Perl. See "DBI_TRACE"
for more information.
Finally, you can set, or get, the trace settings for a handle using the
"TraceLevel" attribute.
All of those methods use parse_trace_flags() and so allow you set both
the trace level and multiple trace flags by using a string containing
the trace level and/or flag names separated by vertical bar (""|"") or
comma ("","") characters. For example:
local $h->{TraceLevel} = "3|SQL|foo";
Trace Output
Initially trace output is written to "STDERR". Both the "$h->trace"
and "DBI->trace" methods take an optional $trace_file parameter, which
may be either the name of a file to be opened by DBI in append mode, or
a reference to an existing writable (possibly layered) filehandle. If
$trace_file is a filename, and can be opened in append mode, or
$trace_file is a writable filehandle, then all trace output (currently
including that from other handles) is redirected to that file. A
warning is generated if $trace_file can't be opened or is not writable.
Further calls to trace() without $trace_file do not alter where the
trace output is sent. If $trace_file is undefined, then trace output is
sent to "STDERR" and, if the prior trace was opened with $trace_file as
a filename, the previous trace file is closed; if $trace_file was a
filehandle, the filehandle is not closed.
NOTE: If $trace_file is specified as a filehandle, the filehandle
should not be closed until all DBI operations are completed, or the
application has reset the trace file via another call to "trace()" that
changes the trace file.
Tracing to Layered Filehandles
NOTE:
o Tied filehandles are not currently supported, as tie operations are
not available to the PerlIO methods used by the DBI.
o PerlIO layer support requires Perl version 5.8 or higher.
As of version 5.8, Perl provides the ability to layer various
"disciplines" on an open filehandle via the PerlIO module.
A simple example of using PerlIO layers is to use a scalar as the
output:
my $scalar = '';
open( my $fh, "+>:scalar", \$scalar );
$dbh->trace( 2, $fh );
Now all trace output is simply appended to $scalar.
A more complex application of tracing to a layered filehandle is the
use of a custom layer (Refer to Perlio::via for details on creating
custom PerlIO layers.). Consider an application with the following
logger module:
package MyFancyLogger;
sub new
{
my $self = {};
my $fh;
open $fh, '>', 'fancylog.log';
$self->{_fh} = $fh;
$self->{_buf} = '';
return bless $self, shift;
}
sub log
{
my $self = shift;
return unless exists $self->{_fh};
my $fh = $self->{_fh};
$self->{_buf} .= shift;
#
# DBI feeds us pieces at a time, so accumulate a complete line
# before outputting
#
print $fh "At ", scalar localtime(), ':', $self->{_buf}, "\n" and
$self->{_buf} = ''
if $self->{_buf}=~tr/\n//;
}
sub close {
my $self = shift;
return unless exists $self->{_fh};
my $fh = $self->{_fh};
print $fh "At ", scalar localtime(), ':', $self->{_buf}, "\n" and
$self->{_buf} = ''
if $self->{_buf};
close $fh;
delete $self->{_fh};
}
1;
To redirect DBI traces to this logger requires creating a package for
the layer:
package PerlIO::via::MyFancyLogLayer;
sub PUSHED
{
my ($class,$mode,$fh) = @_;
my $logger;
return bless \$logger,$class;
}
sub OPEN {
my ($self, $path, $mode, $fh) = @_;
#
# $path is actually our logger object
#
$$self = $path;
return 1;
}
sub WRITE
{
my ($self, $buf, $fh) = @_;
$$self->log($buf);
return length($buf);
}
sub CLOSE {
my $self = shift;
$$self->close();
return 0;
}
1;
The application can then cause DBI traces to be routed to the logger
using
use PerlIO::via::MyFancyLogLayer;
open my $fh, '>:via(MyFancyLogLayer)', MyFancyLogger->new();
$dbh->trace('SQL', $fh);
Now all trace output will be processed by MyFancyLogger's log() method.
Trace Content
Many of the values embedded in trace output are formatted using the
neat() utility function. This means they may be quoted, sanitized, and
possibly truncated if longer than $DBI::neat_maxlen. See "neat" for
more details.
Tracing Tips
You can add tracing to your own application code using the "trace_msg"
method.
It can sometimes be handy to compare trace files from two different
runs of the same script. However using a tool like "diff" on the
original log output doesn't work well because the trace file is full of
object addresses that may differ on each run.
The DBI includes a handy utility called dbilogstrip that can be used to
'normalize' the log content. It can be used as a filter like this:
DBI_TRACE=2 perl yourscript.pl ...args1... 2>&1 | dbilogstrip > dbitrace1.log
DBI_TRACE=2 perl yourscript.pl ...args2... 2>&1 | dbilogstrip > dbitrace2.log
diff -u dbitrace1.log dbitrace2.log
See dbilogstrip for more information.
DBI ENVIRONMENT VARIABLES
The DBI module recognizes a number of environment variables, but most
of them should not be used most of the time. It is better to be
explicit about what you are doing to avoid the need for environment
variables, especially in a web serving system where web servers are
stingy about which environment variables are available.
DBI_DSN
The DBI_DSN environment variable is used by DBI->connect if you do not
specify a data source when you issue the connect. It should have a
format such as "dbi:Driver:databasename".
DBI_DRIVER
The DBI_DRIVER environment variable is used to fill in the database
driver name in DBI->connect if the data source string starts "dbi::"
(thereby omitting the driver). If DBI_DSN omits the driver name,
DBI_DRIVER can fill the gap.
DBI_AUTOPROXY
The DBI_AUTOPROXY environment variable takes a string value that starts
"dbi:Proxy:" and is typically followed by "hostname=...;port=...". It
is used to alter the behaviour of DBI->connect. For full details, see
DBI::Proxy documentation.
DBI_USER
The DBI_USER environment variable takes a string value that is used as
the user name if the DBI->connect call is given undef (as distinct from
an empty string) as the username argument. Be wary of the security
implications of using this.
DBI_PASS
The DBI_PASS environment variable takes a string value that is used as
the password if the DBI->connect call is given undef (as distinct from
an empty string) as the password argument. Be extra wary of the
security implications of using this.
DBI_DBNAME (obsolete)
The DBI_DBNAME environment variable takes a string value that is used
only when the obsolescent style of DBI->connect (with driver name as
fourth parameter) is used, and when no value is provided for the first
(database name) argument.
DBI_TRACE
The DBI_TRACE environment variable specifies the global default trace
settings for the DBI at startup. Can also be used to direct trace
output to a file. When the DBI is loaded it does:
DBI->trace(split /=/, $ENV{DBI_TRACE}, 2) if $ENV{DBI_TRACE};
So if "DBI_TRACE" contains an ""="" character then what follows it is
used as the name of the file to append the trace to.
output appended to that file. If the name begins with a number followed
by an equal sign ("="), then the number and the equal sign are stripped
off from the name, and the number is used to set the trace level. For
example:
DBI_TRACE=1=dbitrace.log perl your_test_script.pl
On Unix-like systems using a Bourne-like shell, you can do this easily
on the command line:
DBI_TRACE=2 perl your_test_script.pl
See "TRACING" for more information.
PERL_DBI_DEBUG (obsolete)
An old variable that should no longer be used; equivalent to DBI_TRACE.
DBI_PROFILE
The DBI_PROFILE environment variable can be used to enable profiling of
DBI method calls. See DBI::Profile for more information.
DBI_PUREPERL
The DBI_PUREPERL environment variable can be used to enable the use of
DBI::PurePerl. See DBI::PurePerl for more information.
WARNING AND ERROR MESSAGES
Fatal Errors
Can't call method "prepare" without a package or object reference
The $dbh handle you're using to call "prepare" is probably
undefined because the preceding "connect" failed. You should always
check the return status of DBI methods, or use the "RaiseError"
attribute.
Can't call method "execute" without a package or object reference
The $sth handle you're using to call "execute" is probably
undefined because the preceding "prepare" failed. You should always
check the return status of DBI methods, or use the "RaiseError"
attribute.
DBI/DBD internal version mismatch
The DBD driver module was built with a different version of DBI
than the one currently being used. You should rebuild the DBD
module under the current version of DBI.
(Some rare platforms require "static linking". On those platforms,
there may be an old DBI or DBD driver version actually embedded in
the Perl executable being used.)
DBD driver has not implemented the AutoCommit attribute
The DBD driver implementation is incomplete. Consult the author.
Can't [sg]et %s->{%s}: unrecognised attribute
You attempted to set or get an unknown attribute of a handle. Make
sure you have spelled the attribute name correctly; case is
significant (e.g., "Autocommit" is not the same as "AutoCommit").
Pure-Perl DBI
A pure-perl emulation of the DBI is included in the distribution for
people using pure-perl drivers who, for whatever reason, can't install
the compiled DBI. See DBI::PurePerl.
SEE ALSO
Driver and Database Documentation
Refer to the documentation for the DBD driver that you are using.
Refer to the SQL Language Reference Manual for the database engine that
you are using.
ODBC and SQL/CLI Standards Reference Information
More detailed information about the semantics of certain DBI methods
that are based on ODBC and SQL/CLI standards is available on-line via
microsoft.com, for ODBC, and www.jtc1sc32.org for the SQL/CLI standard:
DBI method ODBC function SQL/CLI Working Draft
---------- ------------- ---------------------
column_info SQLColumns Page 124
foreign_key_info SQLForeignKeys Page 163
get_info SQLGetInfo Page 214
primary_key_info SQLPrimaryKeys Page 254
table_info SQLTables Page 294
type_info SQLGetTypeInfo Page 239
statistics_info SQLStatistics
To find documentation on the ODBC function you can use the MSDN search
facility at:
http://msdn.microsoft.com/Search
and search for something like "SQLColumns returns".
And for SQL/CLI standard information on SQLColumns you'd read page 124
of the (very large) SQL/CLI Working Draft available from:
http://jtc1sc32.org/doc/N0701-0750/32N0744T.pdf
Standards Reference Information
A hyperlinked, browsable version of the BNF syntax for SQL92 (plus
Oracle 7 SQL and PL/SQL) is available here:
http://cui.unige.ch/db-research/Enseignement/analyseinfo/SQL92/BNFindex.html
You can find more information about SQL standards online by searching
for the appropriate standard names and numbers. For example, searching
for "ANSI/ISO/IEC International Standard (IS) Database Language SQL -
Part 1: SQL/Framework" you'll find a copy at:
ftp://ftp.iks-jena.de/mitarb/lutz/standards/sql/ansi-iso-9075-1-1999.pdf
Books and Articles
Programming the Perl DBI, by Alligator Descartes and Tim Bunce.
<http://books.perl.org/book/154>
Programming Perl 3rd Ed. by Larry Wall, Tom Christiansen & Jon Orwant.
<http://books.perl.org/book/134>
Learning Perl by Randal Schwartz. <http://books.perl.org/book/101>
Details of many other books related to perl can be found at
<http://books.perl.org>
Perl Modules
Index of DBI related modules available from CPAN:
L<https://metacpan.org/search?q=DBD%3A%3A>
L<https://metacpan.org/search?q=DBIx%3A%3A>
L<https://metacpan.org/search?q=DBI>
For a good comparison of RDBMS-OO mappers and some OO-RDBMS mappers
(including Class::DBI, Alzabo, and DBIx::RecordSet in the former
category and Tangram and SPOPS in the latter) see the Perl Object-
Oriented Persistence project pages at:
http://poop.sourceforge.net
A similar page for Java toolkits can be found at:
http://c2.com/cgi-bin/wiki?ObjectRelationalToolComparison
Mailing List
The dbi-users mailing list is the primary means of communication among
users of the DBI and its related modules. For details send email to:
L<dbi-users-help@perl.org>
There are typically between 700 and 900 messages per month. You have
to subscribe in order to be able to post. However you can opt for a
'post-only' subscription.
Mailing list archives (of variable quality) are held at:
http://groups.google.com/groups?group=perl.dbi.users
http://www.xray.mpe.mpg.de/mailing-lists/dbi/
http://www.mail-archive.com/dbi-users%40perl.org/
Assorted Related Links
The DBI "Home Page":
http://dbi.perl.org/
Other DBI related links:
http://www.perlmonks.org/?node=DBI%20recipes
http://www.perlmonks.org/?node=Speeding%20up%20the%20DBI
Other database related links:
http://www.connectionstrings.com/
Security, especially the "SQL Injection" attack:
http://bobby-tables.com/
http://online.securityfocus.com/infocus/1644
FAQ
See <http://faq.dbi-support.com/>
AUTHORS
DBI by Tim Bunce, <http://www.tim.bunce.name>
This pod text by Tim Bunce, J. Douglas Dunlop, Jonathan Leffler and
others. Perl by Larry Wall and the "perl5-porters".
COPYRIGHT
The DBI module is Copyright (c) 1994-2024 Tim Bunce. Ireland. All
rights reserved.
You may distribute under the terms of either the GNU General Public
License or the Artistic License, as specified in the Perl 5.10.0 README
file.
SUPPORT / WARRANTY
The DBI is free Open Source software. IT COMES WITHOUT WARRANTY OF ANY
KIND.
Support
My consulting company, Data Plan Services, offers annual and multi-
annual support contracts for the DBI. These provide sustained support
for DBI development, and sustained value for you in return. Contact me
for details.
Sponsor Enhancements
If your company would benefit from a specific new DBI feature, please
consider sponsoring its development. Work is performed rapidly, and
usually on a fixed-price payment-on-delivery basis. Contact me for
details.
Using such targeted financing allows you to contribute to DBI
development, and rapidly get something specific and valuable in return.
ACKNOWLEDGEMENTS
I would like to acknowledge the valuable contributions of the many
people I have worked with on the DBI project, especially in the early
years (1992-1994). In no particular order: Kevin Stock, Buzz Moschetti,
Kurt Andersen, Ted Lemon, William Hails, Garth Kennedy, Michael
Peppler, Neil S. Briscoe, Jeff Urlwin, David J. Hughes, Jeff Stander,
Forrest D Whitcher, Larry Wall, Jeff Fried, Roy Johnson, Paul Hudson,
Georg Rehfeld, Steve Sizemore, Ron Pool, Jon Meek, Tom Christiansen,
Steve Baumgarten, Randal Schwartz, and a whole lot more.
Then, of course, there are the poor souls who have struggled through
untold and undocumented obstacles to actually implement DBI drivers.
Among their ranks are Jochen Wiedmann, Alligator Descartes, Jonathan
Leffler, Jeff Urlwin, Michael Peppler, Henrik Tougaard, Edwin Pratomo,
Davide Migliavacca, Jan Pazdziora, Peter Haworth, Edmund Mergl, Steve
Williams, Thomas Lowery, and Phlip Plumlee. Without them, the DBI would
not be the practical reality it is today. I'm also especially grateful
to Alligator Descartes for starting work on the first edition of the
"Programming the Perl DBI" book and letting me jump on board.
The DBI and DBD::Oracle were originally developed while I was Technical
Director (CTO) of the Paul Ingram Group in the UK. So I'd especially
like to thank Paul for his generosity and vision in supporting this
work for many years.
A couple of specific DBI features have been sponsored by enlightened
companies:
The development of the swap_inner_handle() method was sponsored by
BizRate.com (<http://BizRate.com>)
The development of DBD::Gofer and related modules was sponsored by
Shopzilla.com (<http://Shopzilla.com>), where I currently work.
CONTRIBUTING
As you can see above, many people have contributed to the DBI and
drivers in many ways over many years.
If you'd like to help then see <http://dbi.perl.org/contributing>.
If you'd like the DBI to do something new or different then a good way
to make that happen is to do it yourself and send me a patch to the
source code that shows the changes. (But read "Speak before you patch"
below.)
Browsing the source code repository
Use https://github.com/perl5-dbi/dbi
How to create a patch using Git
The DBI source code is maintained using Git. To access the source
you'll need to install a Git client. Then, to get the source code, do:
git clone https://github.com/perl5-dbi/dbi.git DBI-git
The source code will now be available in the new subdirectory
"DBI-git".
When you want to synchronize later, issue the command
git pull --all
Make your changes, test them, test them again until everything passes.
If there are no tests for the new feature you added or a behaviour
change, the change should include a new test. Then commit the changes.
Either use
git gui
or
git commit -a -m 'Message to my changes'
If you get any conflicts reported you'll need to fix them first.
Then generate the patch file to be mailed:
git format-patch -1 --attach
which will create a file 0001-*.patch (where * relates to the commit
message). Read the patch file, as a sanity check, and then email it to
dbi-dev@perl.org.
If you have a github <https://github.com> account, you can also fork
the repository, commit your changes to the forked repository and then
do a pull request.
How to create a patch without Git
Unpack a fresh copy of the distribution:
wget http://cpan.metacpan.org/authors/id/T/TI/TIMB/DBI-1.627.tar.gz
tar xfz DBI-1.627.tar.gz
Rename the newly created top level directory:
mv DBI-1.627 DBI-1.627.your_foo
Edit the contents of DBI-1.627.your_foo/* till it does what you want.
Test your changes and then remove all temporary files:
make test && make distclean
Go back to the directory you originally unpacked the distribution:
cd ..
Unpack another copy of the original distribution you started with:
tar xfz DBI-1.627.tar.gz
Then create a patch file by performing a recursive "diff" on the two
top level directories:
diff -purd DBI-1.627 DBI-1.627.your_foo > DBI-1.627.your_foo.patch
Speak before you patch
For anything non-trivial or possibly controversial it's a good idea to
discuss (on dbi-dev@perl.org) the changes you propose before actually
spending time working on them. Otherwise you run the risk of them being
rejected because they don't fit into some larger plans you may not be
aware of.
You can also reach the developers on IRC (chat). If they are on-line,
the most likely place to talk to them is the #dbi channel on
irc.perl.org
TRANSLATIONS
A German translation of this manual (possibly slightly out of date) is
available, thanks to O'Reilly, at:
http://www.oreilly.de/catalog/perldbiger/
OTHER RELATED WORK AND PERL MODULES
Apache::DBI
To be used with the Apache daemon together with an embedded Perl
interpreter like "mod_perl". Establishes a database connection
which remains open for the lifetime of the HTTP daemon. This way
the CGI connect and disconnect for every database access becomes
superfluous.
SQL Parser
See also the SQL::Statement module, SQL parser and engine.
perl v5.34.3 2024-08-24 DBI(3)
dbi 1.644.0 - Generated Sat Aug 24 07:21:36 CDT 2024