Smokeping_probes_DismanPing(3) SmokePing Smokeping_probes_DismanPing(3)
NAME
Smokeping::probes::DismanPing - DISMAN-PING-MIB Probe for SmokePing
SYNOPSIS
*** Probes ***
+DismanPing
offset = 50%
pings = 15
step = 300
# The following variables can be overridden in each target section
/^influx_.+/ = influx_location = In the basement
ownerindex = smokeping
packetsize = 56
pinghost = pinger@router.example.com # mandatory
pingsrc = 192.0.2.9
# [...]
*** Targets ***
probe = DismanPing # if this should be the default probe
# [...]
+ mytarget
# probe = DismanPing # if the default probe is something else
host = my.host
/^influx_.+/ = influx_location = In the basement
ownerindex = smokeping
packetsize = 56
pinghost = pinger@router.example.com # mandatory
pingsrc = 192.0.2.9
DESCRIPTION
Uses the DISMAN-PING-MIB to cause a remote system to send probes.
VARIABLES
Supported probe-specific variables:
offset
If you run many probes concurrently you may want to prevent them
from hitting your network all at the same time. Using the probe-
specific offset parameter you can change the point in time when
each probe will be run. Offset is specified in % of total interval,
or alternatively as 'random', and the offset from the 'General'
section is used if nothing is specified here. Note that this does
NOT influence the rrds itself, it is just a matter of when data
acquisition is initiated. (This variable is only applicable if the
variable 'concurrentprobes' is set in the 'General' section.)
Example value: 50%
pings
How many pings should be sent to each target. Note that the maximum
value for DismanPing MIP is 15, which is less than the SmokePing
default, so this class has its own default value. If your Database
section specifies a value less than 15, you must also set it for
this probe. Note that the number of pings in the RRD files is
fixed when they are originally generated, and if you change this
parameter afterwards, you'll have to delete the old RRD files or
somehow convert them.
Example value: 15
Default value: 15
step
Duration of the base interval that this probe should use, if
different from the one specified in the 'Database' section. Note
that the step in the RRD files is fixed when they are originally
generated, and if you change the step parameter afterwards, you'll
have to delete the old RRD files or somehow convert them. (This
variable is only applicable if the variable 'concurrentprobes' is
set in the 'General' section.)
Example value: 300
Supported target-specific variables:
/^influx_.+/
This is a tag that will be sent to influxdb and has no impact on
the probe measurement. The tag name will be sent without the
"influx_" prefix, which will be replaced with "tag_" instead. Tags
can be used for filtering.
Example value: influx_location = In the basement
ownerindex
The SNMP OwnerIndex to use when setting up the test. When using
VACM, can map to a Security Name or Group Name of the entity
running the test.
By default this will be set to
Example value: smokeping
packetsize
The packetsize parameter lets you configure the packet size for the
pings sent. The minimum is 8, the maximum 65507. Use the same
number as with fping if you want the same packet sizes being used
on the network.
Default value: 56
pinghost
The (mandatory) pinghost parameter specifies the remote system
which will execute the pings, as well as the SNMP community string
on the device.
Example value: pinger@router.example.com
This setting is mandatory.
pingsrc
The (optional) pingsrc parameter specifies the source address to be
used for pings. If specified, this parameter must identify an IP
address assigned to pinghost.
Example value: 192.0.2.9
AUTHORS
Bill Fenner <fenner@research.att.com>, Tobi Oetiker <tobi@oetiker.ch>
NOTES
MENU NAMES
This probe uses the menu name of a test as part of the unique index.
If the menu name is longer than 32 characters, the last 32 characters
are used for the index. Collisions are *not* detected and simply cause
one test's results to be used for all colliding names.
CONFIGURATION
This probe requires read/write access to the pingCtlTable. It also
requires read-only access to the pingResultsTable and the
pingHistoryTable. The DISMAN-PING-MIB is structured such that it is
possible to restrict by pingCtlOwnerIndex. This probe uses a
pingCtlOwnerIndex of "SP on hostname" as ownerindex by default; use
ownerindex to configure this if needed.
SAMPLE JUNOS CONFIGURATION
This configuration permits the community "pinger" read-write access to
the full DISMAN-PING-MIB, but only when sourced from the manager at
192.0.2.134.
snmp {
view pingMIB {
oid .1.3.6.1.2.1.80 include;
}
community pinger {
view pingMIB;
authorization read-write;
clients {
192.0.2.134/32;
}
}
}
SAMPLE CONFIGURATIONS NOTE
This configuration allows the "pinger" community full access to the
DISMAN-PING-MIB. There is information in the description of
pingCtlOwnerIndex in RFC 4560 (<http://tools.ietf.org/html/rfc4560>)
about using the vacmViewTreeFamilyTable to further restrict access.
The author has not tried this method.
2.8.0 2021-08-11 Smokeping_probes_DismanPing(3)
smokeping 2.8.0 - Generated Thu Aug 12 11:27:56 CDT 2021