Smokeping_probes_EchoPingChargen(3)
NAME
Smokeping::probes::EchoPingChargen - an echoping(1) probe for SmokePing
OVERVIEW
Measures TCP chargen (port 19) roundtrip times for SmokePing.
SYNOPSIS
*** Probes ***
+EchoPingChargen
binary = /opt/local/bin/echoping
forks = 5
offset = 50%
step = 300
# The following variables can be overridden in each target section
/^influx_.+/ = influx_location = In the basement
extraopts = -some-letter-the-author-did-not-think-of
fill = A
ipversion = 4
pings = 5
priority = 6
size = 510
timeout = 1
tos = 0xa0
waittime = 1
# [...]
*** Targets ***
probe = EchoPingChargen # if this should be the default probe
# [...]
+ mytarget
# probe = EchoPingChargen # if the default probe is something else
host = my.host
/^influx_.+/ = influx_location = In the basement
extraopts = -some-letter-the-author-did-not-think-of
fill = A
ipversion = 4
pings = 5
priority = 6
size = 510
timeout = 1
tos = 0xa0
waittime = 1
VARIABLES
Supported probe-specific variables:
binary
The location of your echoping binary.
Default value: /opt/local/bin/echoping
forks
Run this many concurrent processes at maximum
Example value: 5
Default value: 5
offset
If you run many probes concurrently you may want to prevent them
from hitting your network all at the same time. Using the probe-
specific offset parameter you can change the point in time when
each probe will be run. Offset is specified in % of total interval,
or alternatively as 'random', and the offset from the 'General'
section is used if nothing is specified here. Note that this does
NOT influence the rrds itself, it is just a matter of when data
acquisition is initiated. (This variable is only applicable if the
variable 'concurrentprobes' is set in the 'General' section.)
Example value: 50%
step
Duration of the base interval that this probe should use, if
different from the one specified in the 'Database' section. Note
that the step in the RRD files is fixed when they are originally
generated, and if you change the step parameter afterwards, you'll
have to delete the old RRD files or somehow convert them. (This
variable is only applicable if the variable 'concurrentprobes' is
set in the 'General' section.)
Example value: 300
Supported target-specific variables:
/^influx_.+/
This is a tag that will be sent to influxdb and has no impact on
the probe measurement. The tag name will be sent without the
"influx_" prefix, which will be replaced with "tag_" instead. Tags
can be used for filtering.
Example value: influx_location = In the basement
extraopts
Any extra options specified here will be passed unmodified to
echoping(1).
Example value: -some-letter-the-author-did-not-think-of
fill
The "-f" echoping(1) option.
Example value: A
ipversion
The IP protocol used. Possible values are "4" and "6". Passed to
echoping(1) as the "-4" or "-6" options.
Example value: 4
pings
How many pings should be sent to each target, if different from the
global value specified in the Database section. Note that the
number of pings in the RRD files is fixed when they are originally
generated, and if you change this parameter afterwards, you'll have
to delete the old RRD files or somehow convert them.
Example value: 5
priority
The "-p" echoping(1) option.
Example value: 6
size
The "-s" echoping(1) option.
Example value: 510
timeout
The "-t" echoping(1) option.
Example value: 1
Default value: 5
tos The "-P" echoping(1) option.
Example value: 0xa0
waittime
The "-w" echoping(1) option.
Example value: 1
AUTHORS
Niko Tyni <ntyni@iki.fi>
NOTES
The udp variable is not supported.
SEE ALSO
Smokeping::probes::EchoPing(3)
2.8.0 Smokeping_probes_EchoPingChargen(3)
smokeping 2.8.0 - Generated Thu Aug 12 08:14:35 CDT 2021