smi_config(3) SMI Management Information Library smi_config(3)
NAME
smiInit, smiExit, smiSetErrorLevel, smiGetFlags, smiSetFlags, smiLoad-
Module, smiGetPath, smiSetPath, smiReadConfig - SMI library configura-
tion routines
SYNOPSIS
#include <smi.h>
int smiInit(const char *tag);
int smiExit();
void smiSetErrorLevel(int level);
int smiGetFlags();
void smiSetFlags(int userflags);
char *smiLoadModule(char *module);
int smiIsLoaded(char *module);
char *smiGetPath();
int smiSetPath(char *path);
int smiSetSeverity(char *pattern, int severity);
int smiReadConfig(char *filename, const char *tag);
void smiSetErrorHandler(SmiErrorHandler *smiErrorHandler);
typedef void (SmiErrorHandler) (char *path, int line,
int severity, char *msg, char *tag);
DESCRIPTION
These functions provide some initialization and adjustment operations
for the SMI library.
The smiInit() function should be the first SMI function called in an
application. It initializes internal structures. If tag is not NULL,
the global configuration file and (on UNIX systems) a user configura-
tion file are read implicitly, if existent. All global statements and
those statements with a tag (a "tag:" prefix) that matches the tag
argument are executed (see also CONFIGURATION FILES below). If tag is
NULL, no configuration files are read, leaving full control to the
application. smiInit() returns zero on success, or otherwise a negative
value.
The smiInit() function can also be used to support multiple different
sets of loaded MIB modules. In this case, the tag argument consists of
the tag followed by a colon and a name to differentiate the loaded MIB
module data sets. Any library function call subsequent to an smi-
Init("tag:dataset") call is using the most recently selected data set.
The smiExit() function should be called when the application no longer
needs any SMI information to release any allocated SMI resources.
The smiSetErrorLevel() function sets the pedantic level (0-9) of the
SMI parsers of the SMI library, currently SMIv1/v2 and SMIng. The
higher the level, the louder it complains. Values up to 3 should be
regarded as errors, higher level could be interpreted as warnings. But
note that this classification is some kind of personal taste. The
default level is 0, since usually only MIB checkers want to tune a
higher level.
The smiGetFlags() and smiSetFlags() functions allow to fetch, modify,
and set some userflags that control the SMI library's behaviour. If
SMI_FLAG_ERRORS is not set, no error messages are printed at all to
keep the SMI library totally quiet, which might be mandatory for some
applications. If SMI_FLAG_STATS is set, the library prints some module
statistics. If SMI_FLAG_RECURSIVE is set, the library also complains
about errors in modules that are read due to import statements. If
SMI_FLAG_NODESCR is set, no description and references strings are
stored in memory. This may save a huge amount of memory in case of
applications that do not need this information.
The smiSetSeverity() function allows to set the severity of all error
that have name prefixed by pattern to the value severity.
The smiLoadModule() function specifies an additional MIB module that
the application claims to know or an additional file path to read.
Only after a module is made known through this function, iterating
retrieval functions and retrieval functions without fully qualified
identifiers will return results from this module. smiLoadModule()
returns the name of the loaded module, of NULL if it could not be
loaded.
The smiIsLoaded() function returns a positive value if the module named
module is already loaded, or zero otherwise.
The smiGetPath() and smiSetPath() functions allow to fetch, modify, and
set the path that is used to search MIB modules. smiGetPath() returns
a copy of the current search path in the form "DIR1:DIR2:...", or NULL
if no path is set. The application should free this string if it is no
longer needed. smiSetPath() sets the search path to path.
The smiReadConfig() function reads the configuration file filename.
All global statements in the configuration file and those statements
with a tag (a ``tag: '' prefix) that matches the tag argument, if
present, are executed.
The smiSetErrorHandler() function allows to set a callback function
that is called by the MIB parsers deviating from the builtin default
error handler, that prints error messages to stderr. The error handler
has to comply with the SmiErrorHandler function type. The path, line,
severity, msg, and tag arguements carry the module's pathname, the line
number within the module, the error severity level, a textual error
message, and a short error name of the error being reported.
MODULE LOCATIONS
The SMI library may retrieve MIB modules from different kinds of
resources. Currently, SMIv1/v2 and SMIng module files are supported.
If in an smiLoadModule() function call a module is specified by a path
name (identified by containing at least one dot or slash character),
this is assumed to be the exact file to read. Otherwise, if a module is
identified by its plain module name, the correspondant file (either
SMIv1/2 or SMIng) is searched along a path. This path is initialized
with
/opt/local/share/mibs/ietf:/opt/local/share/mibs/iana:/opt/local/share/mibs/irtf:/opt/local/share/mibs/site:/opt/local/share/mibs/jacobs:/opt/local/share/mibs/tubs:/opt/local/share/pibs/ietf:/opt/local/share/pibs/site:/opt/local/share/pibs/tubs:/opt/local/share/yang/ietf:/opt/local/share/yang/iana:/opt/local/share/yang/site.
Afterwards the optional global and user configuration files are parsed
for `path' commands, and finally the optional SMIPATH environment vari-
able is evaluated. The `path' command argument and the environment
variable either start with a path separator character (`:' on UNIX-like
systems, `;' on MS-Windows systems) to append to the path, or end with
a path separator character to prepend to the path, or otherwise com-
pletely replace the path. The path can also be controlled by the
smiGetPath() and smiSetPath() functions (see above).
When files are searched by a given module name, they might have no
extension or one of the extensions `.my', `.smiv2', `.sming', `.mib',
or `.txt'. However, the MIB module language is identified by the file's
content, not by its file name extension.
CONFIGURATION FILES
SMI library configuration files read at initialization and on demand by
smiReadConfig() have a simple line oriented syntax. Empty lines and
those starting with `#' are ignored. Other lines start with an optional
tag (prepended by a colon), followed by a command and options dependent
on the command. Tags are used to limit the scope of a command to those
applications that are using this tag.
The load command is used to preload a given MIB module. If multiple
modules shall be preloaded, multiple load commands must be used.
The path command allows to prepend or append components to the MIB mod-
ule search path or to modify it completely (see also MODULE LOCATIONS
above).
The cache command allows to add an additional directory for MIB module
lookup as a last resort. The first argument specifies the directory and
the rest of the line starting from the second argument specifies the
caching method, which is invoked with the MIB module name appended if
the module is found neither in one of the regular directories nor in
the cache directory beforehand.
The level command sets the error level.
The hide command allows to tune the list of errors that are reported.
It raises all errors with names prefixed by the given pattern to sever-
ity level 9. [Currently, there is no way to list the error names. RTFS:
error.c.]
Example configuration:
#
# $HOME/.smirc
#
# add a private directory
path :/usr/home/strauss/lib/mibs
# don't show any errors by default
level 0
# preload some basic modules
load SNMPv2-SMI
load SNMPv2-TC
load SNMPv2-CONF
# want to make smilint shout
smilint: level 8
# but please don't claim about
# any names longer than 32 chars
smilint: hide namelength-32
tcpdump: load DISMAN-SCRIPT-MIB
smiquery: load IF-MIB
smiquery: load DISMAN-SCRIPT-MIB
FILES
${prefix}/etc/smi.conf global configuration file
$HOME/.smirc user configuration file
${prefix}/include/smi.h SMI library header file
/opt/local/share/mibs/ SMI module repository directory
SEE ALSO
libsmi(3), smi.h
AUTHOR
(C) 1999-2001 Frank Strauss, TU Braunschweig, Germany
<strauss@ibr.cs.tu-bs.de>
IBR August 22, 2001 smi_config(3)
libsmi 0.5.0 - Generated Sun Apr 12 14:42:28 CDT 2015