sane-hp3900(5) SANE Scanner Access Now Easy sane-hp3900(5)
NAME
sane-hp3900 - SANE backend for RTS8822 chipset based scanners
DESCRIPTION
The sane-hp3900 library implements a SANE (Scanner Access Now Easy)
backend that provides access at least to the following USB flatbed
scanners:
Model: Chipset:
------ --------
HP ScanJet 3800 RTS8822BL-03A
HP ScanJet 3970 RTS8822L-01H
HP ScanJet 4070 Photosmart RTS8822L-01H
HP ScanJet 4370 RTS8822L-02A
HP ScanJet G2710 RTS8822BL-03A
HP ScanJet G3010 RTS8822L-02A
HP ScanJet G3110 RTS8822L-02A
UMAX Astra 4900/4950 RTS8822L-01H *
BenQ 5550 RTS8823L-01E *
More details can be found on the sane-hp3900(5) backend homepage
http://sourceforge.net/projects/hp3900-series/.
This is ALPHA software. Keep your hand at the scanner's plug and unplug
it, if scanner does not start to scan. See also the BUGS section.
If you own a scanner other than the ones listed above that works with
this backend, please let us know this by sending the scanner's exact
model name and the USB vendor and device ids (e.g. from
/proc/bus/usb/devices, sane-find-scanner(1) or syslog) to us. Even if the
scanner's name is only slightly different from the models mentioned
above, please let us know.
CONFIGURATION
The contents of the hp3900.conf file is a list of usb lines containing
vendor and product ids that correspond to USB scanners. The file can also
contain the names of device files that correspond to an HP 39XX scanner.
Empty lines and lines starting with a hash mark (#) are ignored. The
scanners are autodetected by usb vendor_id product_id statements which
are already included into hp3900.conf. "vendor_id" and "product_id" are
hexadecimal numbers that identify the scanner. If autodetection does not
work, add the device name of your scanner to the configuration file,
FILES
/opt/local/etc/sane.d/hp3900.conf
The backend configuration file (see also description of
SANE_CONFIG_DIR below).
/opt/local/lib/sane/libsane-hp3900.a
The static library implementing this backend.
/opt/local/lib/sane/libsane-hp3900.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_CONFIG_DIR
This environment variable specifies the list of directories that
may contain the configuration file. On *NIX systems, the
directories are separated by a colon (`:'), under OS/2, they are
separated by a semi-colon (`;'). If this variable is not set, the
configuration file is searched in two default directories: first,
the current working directory (.) and then in
/opt/local/etc/sane.d. If the value of the environment variable
ends with the directory separator character, then the default
directories are searched after the explicitly specified
directories. For example, setting SANE_CONFIG_DIR to
"/tmp/config:" would result in directories tmp/config, ., and
/opt/local/etc/sane.d being searched (in this order).
SANE_DEBUG_HP3900
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output.
Example: export SANE_DEBUG_HP3900=4
SEE ALSO
sane(7), sane-usb(5), sane-find-scanner(1),
http://sourceforge.net/projects/hp3900-series/
http://jkdsoftware.dyndns.org/drupal/?q=es/books/151
AUTHOR
Jonathan Bravo Lopez <jkdsoft@gmail.com>
BUGS
Scanning is only tested with Linux/ix86/gcc. Be careful when testing on
other operating systems and especially on big-endian platforms. The
scanner may get wrong data.
06 Jan 2009 sane-hp3900(5)
sane-backends 1.2.1 - Generated Sat Feb 25 11:42:55 CST 2023