sane-matsushita(5) SANE Scanner Access Now Easy sane-matsushita(5)
NAME
sane-matsushita - SANE backend for Panasonic KV-SS high speed scanners
DESCRIPTION
The sane-matsushita library implements a SANE (Scanner Access Now Easy)
backend that provides access to some Panasonic KV-SS high speed scanners.
This backend is stable.
At present, the following scanners are known to work with this backend:
Product id
--------------
KV-SS25
KV-SS25D
KV-SS55EX (*)
KV-S2025C (*)
KV-S2045C (*)
KV-S2065L (*)
(*) WARNING: None of the advanced options of these scanners are available
(ie no color, no high resolution, no automatic cropping). Basically, the
driver does no more than what it does for the KV-SS25. I don't have
access to such scanners, and thus cannot add these options.
Other Panasonic high speed scanners may or may not work with that
backend.
Valid command line options and their syntax can be listed by using
scanimage --help -d matsushita
Scan Mode
--mode selects the basic mode of operation of the scanner.
--resolution
selects the resolution for a scan. Each model supports all or a
subset of these resolutions: 100, 150, 200, 240, 300, 360, 400.
--duplex
indicates whether to scan both side of the sheet.
--feeder-mode
selects the number of pages to scan (one or until the tray is
empty).
Geometry
--paper-size A4|...|Legal|Letter [A4]
options selects the area to scan. It adjust the -l -t -x -y
options accordingly. It does not need to be the real size of the
paper.
-l -t -x -y
control the scan area: -l sets the top left x coordinate, -t the
top left y coordinate, -x selects the width and -y the height of
the scan area. All parameters are specified in millimeters. It is
possible to use the option --paper-size instead.
Enhancement
--brightness
controls the brightness of the acquired image. The value varies
from 1 to 255, or less, depending on the scanner model.
--contrast
controls the contrast of the acquired image. Some models do not
support that option.
--automatic-threshold
automatically sets brightness, contrast, white level, gamma, noise
reduction and image emphasis. These options are not available when
automatic-threshold is in use.
--halftone-pattern
option sets the tonal gradation for the halftone mode. Pattern
downloading is not implemented by the backend.
--autoseparation
provides automatic separation of text and images.
--white-level
option indicate the source of the white base.
--noise-reduction
reduces the isolated dot noise. This option is not supported by
all scanners.
--image-emphasis
option sets the image emphasis. Some selection are not available
on all scanners.
--gamma
options set the gamma curve. It is only valid for Gray modes, and
is not available on all scanners. Gamma downloading is not
implemented by the backend.
CONFIGURATION FILE
The configuration file /opt/local/etc/sane.d/matsushita.conf supports the
device name to use (eg /dev/scanner) and the SCSI option to auto-detect
the scanners supported.
FILES
/opt/local/lib/sane/libsane-matsushita.a
The static library implementing this backend.
/opt/local/lib/sane/libsane-matsushita.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_MATSUSHITA
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
E.g., a value of 128 requests all debug output to be printed.
Smaller levels reduce verbosity.
LIMITATIONS
Memory in the KV-SS 25
The KV-SS 25 has not enough internal memory to scan a whole A4
page in duplex mode at high resolution. The frontend will return a
memory error in that case. Apparently, the KV-SS 25D has not that
problem.
Pattern and gamma downloading
The scanner, with the proper firmware, can download a halftone
pattern and a gamma table. This is not implemented.
Sub-areas
The scanner can support up to 3 sub-areas on each side to define
some more precise enhancement options. This is not implemented.
Duplex mode
The backend does not support the setting of different options for
each side. The scan will occur with the same options (halftone
pattern, brightness, image emphasis) for both sides.
SCANNING EXAMPLE
To date, the only frontend capable of using this scanner at full speed is
scanadf(1).
A scanadf(1) command line would be:
scanadf -d matsushita --output-file scan%04d.pbm --start-count 0 --duplex
--resolution 300 --feeder-mode="All pages" --paper-size="A4"
BUGS
None known.
SEE ALSO
sane-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)
AUTHOR
The package is actively maintained by Frank Zago.
http://www.zago.net/sane/#matsushita
11 Jul 2008 sane-matsushita(5)
sane-backends 1.2.1 - Generated Sat Feb 25 08:53:00 CST 2023