sane-umax1220u(5) SANE Scanner Access Now Easy sane-umax1220u(5)
NAME
sane-umax1220u - SANE backend for the UMAX Astra 1220U and similar
scanners
DESCRIPTION
The sane-umax1220 library implements a SANE (Scanner Access Now Easy)
backend for the the UMAX Astra 1220U and similar scanners.
For more information on this backend, please visit
http://umax1220u-sane.sourceforge.net/.
UMAX ASTRA 1600U/2000U/2100U SUPPORT
This backend is also able to drive the UMAX Astra 1600U/2000U/2100U. The
2100U is confirmed to work. For the other scanners no reports have been
received yet. Please contact us and tell us if your scanner works
(sane-devel@alioth-lists.debian.net).
CONFIGURATION
Usually, no manual configuration is necessary. The configuration file for
this backend resides in /opt/local/etc/sane.d/umax1220u.conf.
Its content is a list of device names that correspond to UMAX Astra
scanners. Empty lines and lines starting with a hash mark (#) are
ignored. A sample configuration file is shown below:
#usb vendor product
usb 0x1606 0x0010
# Device list for non-linux systems
/dev/scanner
/dev/usb/scanner0
See sane-usb(5) for information on how to set the access permissions on
the usb device files.
FILES
The backend configuration file:
/opt/local/etc/sane.d/umax1220u.conf
The static library implementing this backend:
/opt/local/lib/sane/libsane-umax1220u.a
The shared library implementing this backend:
/opt/local/lib/sane/libsane-umax1220u.so (present on systems that
support dynamic loading)
ENVIRONMENT
SANE_DEBUG_UMAX1220U
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
E.g., a value of 128 requests all debug output to be printed.
Smaller levels reduce verbosity:
SANE_DEBUG_UMAX1220U values:
Number Remark
1 print failures
2 print information
3 print high-level function calls
4 print high-level function checkpoints
9 print mid-level function calls
10 print mid-level function checkpoints
80 print protocol-level function entry
90 print protocol-level function exit
Example:
export SANE_DEBUG_UMAX1220U=10
KNOWN BUGS
600 dpi scanning may fail for large image sizes.
If you keep getting I/O errors, try cycling the power on your scanner to
reset it.
There is no way to cancel a scan, since the driver ignores sane_cancel().
If you try scanning an image which is too small, you will get I/O errors.
Be sure to adjust the scan area before doing a scan, since by default,
the scan area is zero.
SEE ALSO
sane(7), sane-usb(5)
(Old) homepage:
http://umax1220u-sane.sourceforge.net/
AUTHOR
Marcio Luis Teixeira <marciot@users.sourceforge.net>
EMAIL-CONTACT
sane-devel@alioth-lists.debian.net
REPORTING BUGS
This backend isn't actively maintained. Nevertheless, bug reports and
comments should be sent to the sane-devel mailing list. When reporting
bugs, please run the backend with SANE_DEBUG_UMAX1220U set to 10 and
attach a copy of the log messages.
14 Jul 2008 sane-umax1220u(5)
sane-backends 1.2.1 - Generated Sat Feb 25 15:35:50 CST 2023