manpagez: man pages & more
man perlstyle(1)
Home | html | info | man
PERLSTYLE(1pm)         Perl Programmers Reference Guide         PERLSTYLE(1pm)


       perlstyle - Perl style guide


       Each programmer will, of course, have his or her own preferences in
       regards to formatting, but there are some general guidelines that will
       make your programs easier to read, understand, and maintain.

       The most important thing is to use strict and warnings in all your code
       or know the reason why not to.  You may turn them off explicitly for
       particular portions of code via "no warnings" or "no strict", and this
       can be limited to the specific warnings or strict features you wish to
       disable.  The -w flag and $^W variable should not be used for this
       purpose since they can affect code you use but did not write, such as
       modules from core or CPAN.

       Regarding aesthetics of code lay out, about the only thing Larry cares
       strongly about is that the closing curly bracket of a multi-line BLOCK
       should line up with the keyword that started the construct.  Beyond
       that, he has other preferences that aren't so strong:

       o   4-column indent.

       o   Opening curly on same line as keyword, if possible, otherwise line

       o   Space before the opening curly of a multi-line BLOCK.

       o   One-line BLOCK may be put on one line, including curlies.

       o   No space before the semicolon.

       o   Semicolon omitted in "short" one-line BLOCK.

       o   Space around most operators.

       o   Space around a "complex" subscript (inside brackets).

       o   Blank lines between chunks that do different things.

       o   Uncuddled elses.

       o   No space between function name and its opening parenthesis.

       o   Space after each comma.

       o   Long lines broken after an operator (except "and" and "or").

       o   Space after last parenthesis matching on current line.

       o   Line up corresponding items vertically.

       o   Omit redundant punctuation as long as clarity doesn't suffer.

       Larry has his reasons for each of these things, but he doesn't claim
       that everyone else's mind works the same as his does.

       Here are some other more substantive style issues to think about:

       o   Just because you CAN do something a particular way doesn't mean
           that you SHOULD do it that way.  Perl is designed to give you
           several ways to do anything, so consider picking the most readable
           one.  For instance

               open(my $fh, '<', $foo) || die "Can't open $foo: $!";

           is better than

               die "Can't open $foo: $!" unless open(my $fh, '<', $foo);

           because the second way hides the main point of the statement in a
           modifier.  On the other hand

               print "Starting analysis\n" if $verbose;

           is better than

               $verbose && print "Starting analysis\n";

           because the main point isn't whether the user typed -v or not.

           Similarly, just because an operator lets you assume default
           arguments doesn't mean that you have to make use of the defaults.
           The defaults are there for lazy systems programmers writing one-
           shot programs.  If you want your program to be readable, consider
           supplying the argument.

           Along the same lines, just because you CAN omit parentheses in many
           places doesn't mean that you ought to:

               return print reverse sort num values %array;
               return print(reverse(sort num (values(%array))));

           When in doubt, parenthesize.  At the very least it will let some
           poor schmuck bounce on the % key in vi.

           Even if you aren't in doubt, consider the mental welfare of the
           person who has to maintain the code after you, and who will
           probably put parentheses in the wrong place.

       o   Don't go through silly contortions to exit a loop at the top or the
           bottom, when Perl provides the "last" operator so you can exit in
           the middle.  Just "outdent" it a little to make it more visible:

                   for (;;) {
                     last LINE if $foo;
                       next LINE if /^#/;

       o   Don't be afraid to use loop labels--they're there to enhance
           readability as well as to allow multilevel loop breaks.  See the
           previous example.

       o   Avoid using "grep()" (or "map()") or `backticks` in a void context,
           that is, when you just throw away their return values.  Those
           functions all have return values, so use them.  Otherwise use a
           "foreach()" loop or the "system()" function instead.

       o   For portability, when using features that may not be implemented on
           every machine, test the construct in an eval to see if it fails.
           If you know what version or patchlevel a particular feature was
           implemented, you can test $] ($PERL_VERSION in "English") to see if
           it will be there.  The "Config" module will also let you
           interrogate values determined by the Configure program when Perl
           was installed.

       o   Choose mnemonic identifiers.  If you can't remember what mnemonic
           means, you've got a problem.

       o   While short identifiers like $gotit are probably ok, use
           underscores to separate words in longer identifiers.  It is
           generally easier to read $var_names_like_this than
           $VarNamesLikeThis, especially for non-native speakers of English.
           It's also a simple rule that works consistently with

           Package names are sometimes an exception to this rule.  Perl
           informally reserves lowercase module names for "pragma" modules
           like "integer" and "strict".  Other modules should begin with a
           capital letter and use mixed case, but probably without underscores
           due to limitations in primitive file systems' representations of
           module names as files that must fit into a few sparse bytes.

       o   You may find it helpful to use letter case to indicate the scope or
           nature of a variable. For example:

               $ALL_CAPS_HERE   constants only (beware clashes with perl vars!)
               $Some_Caps_Here  package-wide global/static
               $no_caps_here    function scope my() or local() variables

           Function and method names seem to work best as all lowercase.
           E.g., "$obj->as_string()".

           You can use a leading underscore to indicate that a variable or
           function should not be used outside the package that defined it.

       o   If you have a really hairy regular expression, use the "/x"  or
           "/xx" modifiers and put in some whitespace to make it look a little
           less like line noise.  Don't use slash as a delimiter when your
           regexp has slashes or backslashes.

       o   Use the new "and" and "or" operators to avoid having to
           parenthesize list operators so much, and to reduce the incidence of
           punctuation operators like "&&" and "||".  Call your subroutines as
           if they were functions or list operators to avoid excessive
           ampersands and parentheses.

       o   Use here documents instead of repeated "print()" statements.

       o   Line up corresponding things vertically, especially if it'd be too
           long to fit on one line anyway.

               $IDX = $ST_MTIME;
               $IDX = $ST_ATIME       if $opt_u;
               $IDX = $ST_CTIME       if $opt_c;
               $IDX = $ST_SIZE        if $opt_s;

               mkdir $tmpdir, 0700 or die "can't mkdir $tmpdir: $!";
               chdir($tmpdir)      or die "can't chdir $tmpdir: $!";
               mkdir 'tmp',   0777 or die "can't mkdir $tmpdir/tmp: $!";

       o   Always check the return codes of system calls.  Good error messages
           should go to "STDERR", include which program caused the problem,
           what the failed system call and arguments were, and (VERY
           IMPORTANT) should contain the standard system error message for
           what went wrong.  Here's a simple but sufficient example:

               opendir(my $dh, $dir)        or die "can't opendir $dir: $!";

       o   Line up your transliterations when it makes sense:

               tr [abc]

       o   Think about reusability.  Why waste brainpower on a one-shot when
           you might want to do something like it again?  Consider
           generalizing your code.  Consider writing a module or object class.
           Consider making your code run cleanly with "use strict" and "use
           warnings" in effect.  Consider giving away your code.  Consider
           changing your whole world view.  Consider... oh, never mind.

       o   Try to document your code and use Pod formatting in a consistent
           way. Here are commonly expected conventions:

           o   use "C<>" for function, variable and module names (and more
               generally anything that can be considered part of code, like
               filehandles or specific values). Note that function names are
               considered more readable with parentheses after their name,
               that is "function()".

           o   use "B<>" for commands names like cat or grep.

           o   use "F<>" or "C<>" for file names. "F<>" should be the only Pod
               code for file names, but as most Pod formatters render it as
               italic, Unix and Windows paths with their slashes and
               backslashes may be less readable, and better rendered with

       o   Be consistent.

       o   Be nice.

perl v5.34.0                      2020-06-14                    PERLSTYLE(1pm)

perl 5.34.0 - Generated Sun Feb 27 12:38:56 CST 2022
© 2000-2024
Individual documents may contain additional copyright information.