manpagez: man pages & more
html files: glib
Home | html | info | man

Threads

Threads — portable support for threads, mutexes, locks, conditions and thread private data

Functions

gpointer (*GThreadFunc) ()
GThread * g_thread_new ()
GThread * g_thread_try_new ()
GThread * g_thread_ref ()
void g_thread_unref ()
gpointer g_thread_join ()
void g_thread_yield ()
void g_thread_exit ()
GThread * g_thread_self ()
void g_mutex_init ()
void g_mutex_clear ()
void g_mutex_lock ()
gboolean g_mutex_trylock ()
void g_mutex_unlock ()
GMutexLocker * g_mutex_locker_new ()
void g_mutex_locker_free ()
#define G_LOCK_DEFINE()
#define G_LOCK_DEFINE_STATIC()
#define G_LOCK_EXTERN()
#define G_LOCK()
#define G_TRYLOCK()
#define G_UNLOCK()
void g_rec_mutex_init ()
void g_rec_mutex_clear ()
void g_rec_mutex_lock ()
gboolean g_rec_mutex_trylock ()
void g_rec_mutex_unlock ()
void g_rw_lock_init ()
void g_rw_lock_clear ()
void g_rw_lock_writer_lock ()
gboolean g_rw_lock_writer_trylock ()
void g_rw_lock_writer_unlock ()
void g_rw_lock_reader_lock ()
gboolean g_rw_lock_reader_trylock ()
void g_rw_lock_reader_unlock ()
void g_cond_init ()
void g_cond_clear ()
void g_cond_wait ()
gboolean g_cond_timed_wait ()
gboolean g_cond_wait_until ()
void g_cond_signal ()
void g_cond_broadcast ()
#define G_PRIVATE_INIT()
gpointer g_private_get ()
void g_private_set ()
void g_private_replace ()
#define g_once()
gboolean g_once_init_enter ()
void g_once_init_leave ()
void g_bit_lock ()
gboolean g_bit_trylock ()
void g_bit_unlock ()
void g_pointer_bit_lock ()
gboolean g_pointer_bit_trylock ()
void g_pointer_bit_unlock ()
guint g_get_num_processors ()

Types and Values

#define G_THREAD_ERROR
enum GThreadError
  GThread
union GMutex
typedef GMutexLocker
struct GRecMutex
struct GRWLock
struct GCond
struct GPrivate
struct GOnce
enum GOnceStatus
#define G_ONCE_INIT

Includes

#include <glib.h>

Description

Threads act almost like processes, but unlike processes all threads of one process share the same memory. This is good, as it provides easy communication between the involved threads via this shared memory, and it is bad, because strange things (so called "Heisenbugs") might happen if the program is not carefully designed. In particular, due to the concurrent nature of threads, no assumptions on the order of execution of code running in different threads can be made, unless order is explicitly forced by the programmer through synchronization primitives.

The aim of the thread-related functions in GLib is to provide a portable means for writing multi-threaded software. There are primitives for mutexes to protect the access to portions of memory (GMutex, GRecMutex and GRWLock). There is a facility to use individual bits for locks (g_bit_lock()). There are primitives for condition variables to allow synchronization of threads (GCond). There are primitives for thread-private data - data that every thread has a private instance of (GPrivate). There are facilities for one-time initialization (GOnce, g_once_init_enter()). Finally, there are primitives to create and manage threads (GThread).

The GLib threading system used to be initialized with g_thread_init(). This is no longer necessary. Since version 2.32, the GLib threading system is automatically initialized at the start of your program, and all thread-creation functions and synchronization primitives are available right away.

Note that it is not safe to assume that your program has no threads even if you don't call g_thread_new() yourself. GLib and GIO can and will create threads for their own purposes in some cases, such as when using g_unix_signal_source_new() or when using GDBus.

Originally, UNIX did not have threads, and therefore some traditional UNIX APIs are problematic in threaded programs. Some notable examples are

  • C library functions that return data in statically allocated buffers, such as strtok() or strerror(). For many of these, there are thread-safe variants with a _r suffix, or you can look at corresponding GLib APIs (like g_strsplit() or g_strerror()).

  • The functions setenv() and unsetenv() manipulate the process environment in a not thread-safe way, and may interfere with getenv() calls in other threads. Note that getenv() calls may be hidden behind other APIs. For example, GNU gettext() calls getenv() under the covers. In general, it is best to treat the environment as readonly. If you absolutely have to modify the environment, do it early in main(), when no other threads are around yet.

  • The setlocale() function changes the locale for the entire process, affecting all threads. Temporary changes to the locale are often made to change the behavior of string scanning or formatting functions like scanf() or printf(). GLib offers a number of string APIs (like g_ascii_formatd() or g_ascii_strtod()) that can often be used as an alternative. Or you can use the uselocale() function to change the locale only for the current thread.

  • The fork() function only takes the calling thread into the child's copy of the process image. If other threads were executing in critical sections they could have left mutexes locked which could easily cause deadlocks in the new child. For this reason, you should call exit() or exec() as soon as possible in the child and only make signal-safe library calls before that.

  • The daemon() function uses fork() in a way contrary to what is described above. It should not be used with GLib programs.

GLib itself is internally completely thread-safe (all global data is automatically locked), but individual data structure instances are not automatically locked for performance reasons. For example, you must coordinate accesses to the same GHashTable from multiple threads. The two notable exceptions from this rule are GMainLoop and GAsyncQueue, which are thread-safe and need no further application-level locking to be accessed from multiple threads. Most refcounting functions such as g_object_ref() are also thread-safe.

A common use for GThreads is to move a long-running blocking operation out of the main thread and into a worker thread. For GLib functions, such as single GIO operations, this is not necessary, and complicates the code. Instead, the _async() version of the function should be used from the main thread, eliminating the need for locking and synchronisation between multiple threads. If an operation does need to be moved to a worker thread, consider using g_task_run_in_thread(), or a GThreadPool. GThreadPool is often a better choice than GThread, as it handles thread reuse and task queueing; GTask uses this internally.

However, if multiple blocking operations need to be performed in sequence, and it is not possible to use GTask for them, moving them to a worker thread can clarify the code.

Functions

GThreadFunc ()

gpointer
(*GThreadFunc) (gpointer data);

Specifies the type of the func functions passed to g_thread_new() or g_thread_try_new().

Parameters

data

data passed to the thread

 

Returns

the return value of the thread


g_thread_new ()

GThread *
g_thread_new (const gchar *name,
              GThreadFunc func,
              gpointer data);

This function creates a new thread. The new thread starts by invoking func with the argument data. The thread will run until func returns or until g_thread_exit() is called from the new thread. The return value of func becomes the return value of the thread, which can be obtained with g_thread_join().

The name can be useful for discriminating threads in a debugger. It is not used for other purposes and does not have to be unique. Some systems restrict the length of name to 16 bytes.

If the thread can not be created the program aborts. See g_thread_try_new() if you want to attempt to deal with failures.

If you are using threads to offload (potentially many) short-lived tasks, GThreadPool may be more appropriate than manually spawning and tracking multiple GThreads.

To free the struct returned by this function, use g_thread_unref(). Note that g_thread_join() implicitly unrefs the GThread as well.

Parameters

name

an (optional) name for the new thread.

[nullable]

func

a function to execute in the new thread

 

data

an argument to supply to the new thread

 

Returns

the new GThread

Since: 2.32


g_thread_try_new ()

GThread *
g_thread_try_new (const gchar *name,
                  GThreadFunc func,
                  gpointer data,
                  GError **error);

This function is the same as g_thread_new() except that it allows for the possibility of failure.

If a thread can not be created (due to resource limits), error is set and NULL is returned.

Parameters

name

an (optional) name for the new thread.

[nullable]

func

a function to execute in the new thread

 

data

an argument to supply to the new thread

 

error

return location for error, or NULL

 

Returns

the new GThread, or NULL if an error occurred

Since: 2.32


g_thread_ref ()

GThread *
g_thread_ref (GThread *thread);

Increase the reference count on thread .

Parameters

thread

a GThread

 

Returns

a new reference to thread

Since: 2.32


g_thread_unref ()

void
g_thread_unref (GThread *thread);

Decrease the reference count on thread , possibly freeing all resources associated with it.

Note that each thread holds a reference to its GThread while it is running, so it is safe to drop your own reference to it if you don't need it anymore.

Parameters

thread

a GThread

 

Since: 2.32


g_thread_join ()

gpointer
g_thread_join (GThread *thread);

Waits until thread finishes, i.e. the function func , as given to g_thread_new(), returns or g_thread_exit() is called. If thread has already terminated, then g_thread_join() returns immediately.

Any thread can wait for any other thread by calling g_thread_join(), not just its 'creator'. Calling g_thread_join() from multiple threads for the same thread leads to undefined behaviour.

The value returned by func or given to g_thread_exit() is returned by this function.

g_thread_join() consumes the reference to the passed-in thread . This will usually cause the GThread struct and associated resources to be freed. Use g_thread_ref() to obtain an extra reference if you want to keep the GThread alive beyond the g_thread_join() call.

Parameters

thread

a GThread

 

Returns

the return value of the thread


g_thread_yield ()

void
g_thread_yield ();

Causes the calling thread to voluntarily relinquish the CPU, so that other threads can run.

This function is often used as a method to make busy wait less evil.


g_thread_exit ()

void
g_thread_exit (gpointer retval);

Terminates the current thread.

If another thread is waiting for us using g_thread_join() then the waiting thread will be woken up and get retval as the return value of g_thread_join().

Calling g_thread_exit() with a parameter retval is equivalent to returning retval from the function func , as given to g_thread_new().

You must only call g_thread_exit() from a thread that you created yourself with g_thread_new() or related APIs. You must not call this function from a thread created with another threading library or or from within a GThreadPool.

Parameters

retval

the return value of this thread

 

g_thread_self ()

GThread *
g_thread_self (void);

This function returns the GThread corresponding to the current thread. Note that this function does not increase the reference count of the returned struct.

This function will return a GThread even for threads that were not created by GLib (i.e. those created by other threading APIs). This may be useful for thread identification purposes (i.e. comparisons) but you must not use GLib functions (such as g_thread_join()) on these threads.

Returns

the GThread representing the current thread


g_mutex_init ()

void
g_mutex_init (GMutex *mutex);

Initializes a GMutex so that it can be used.

This function is useful to initialize a mutex that has been allocated on the stack, or as part of a larger structure. It is not necessary to initialize a mutex that has been statically allocated.

1
2
3
4
5
6
7
8
9
typedef struct {
  GMutex m;
  ...
} Blob;

Blob *b;

b = g_new (Blob, 1);
g_mutex_init (&b->m);

To undo the effect of g_mutex_init() when a mutex is no longer needed, use g_mutex_clear().

Calling g_mutex_init() on an already initialized GMutex leads to undefined behaviour.

Parameters

mutex

an uninitialized GMutex

 

Since: 2.32


g_mutex_clear ()

void
g_mutex_clear (GMutex *mutex);

Frees the resources allocated to a mutex with g_mutex_init().

This function should not be used with a GMutex that has been statically allocated.

Calling g_mutex_clear() on a locked mutex leads to undefined behaviour.

Sine: 2.32

Parameters

mutex

an initialized GMutex

 

g_mutex_lock ()

void
g_mutex_lock (GMutex *mutex);

Locks mutex . If mutex is already locked by another thread, the current thread will block until mutex is unlocked by the other thread.

GMutex is neither guaranteed to be recursive nor to be non-recursive. As such, calling g_mutex_lock() on a GMutex that has already been locked by the same thread results in undefined behaviour (including but not limited to deadlocks).

Parameters

mutex

a GMutex

 

g_mutex_trylock ()

gboolean
g_mutex_trylock (GMutex *mutex);

Tries to lock mutex . If mutex is already locked by another thread, it immediately returns FALSE. Otherwise it locks mutex and returns TRUE.

GMutex is neither guaranteed to be recursive nor to be non-recursive. As such, calling g_mutex_lock() on a GMutex that has already been locked by the same thread results in undefined behaviour (including but not limited to deadlocks or arbitrary return values).

Parameters

mutex

a GMutex

 

Returns

TRUE if mutex could be locked


g_mutex_unlock ()

void
g_mutex_unlock (GMutex *mutex);

Unlocks mutex . If another thread is blocked in a g_mutex_lock() call for mutex , it will become unblocked and can lock mutex itself.

Calling g_mutex_unlock() on a mutex that is not locked by the current thread leads to undefined behaviour.

Parameters

mutex

a GMutex

 

g_mutex_locker_new ()

GMutexLocker *
g_mutex_locker_new (GMutex *mutex);

Lock mutex and return a new GMutexLocker. Unlock with g_mutex_locker_free(). Using g_mutex_unlock() on mutex while a GMutexLocker exists can lead to undefined behaviour.

This is intended to be used with g_autoptr(). Note that g_autoptr() is only available when using GCC or clang, so the following example will only work with those compilers:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
typedef struct
{
  ...
  GMutex mutex;
  ...
} MyObject;

static void
my_object_do_stuff (MyObject *self)
{
  g_autoptr(GMutexLocker) locker = g_mutex_locker_new (&self->mutex);

  // Code with mutex locked here

  if (cond)
    // No need to unlock
    return;

  // Optionally early unlock
  g_clear_pointer (&locker, g_mutex_locker_free);

  // Code with mutex unlocked here
}

Parameters

mutex

a mutex to lock

 

Returns

a GMutexLocker

Since: 2.44


g_mutex_locker_free ()

void
g_mutex_locker_free (GMutexLocker *locker);

Unlock locker 's mutex. See g_mutex_locker_new() for details.

Parameters

locker

a GMutexLocker

 

Since: 2.44


G_LOCK_DEFINE()

#define G_LOCK_DEFINE(name)    

The G_LOCK_ macros provide a convenient interface to GMutex. G_LOCK_DEFINE defines a lock. It can appear in any place where variable definitions may appear in programs, i.e. in the first block of a function or outside of functions. The name parameter will be mangled to get the name of the GMutex. This means that you can use names of existing variables as the parameter - e.g. the name of the variable you intend to protect with the lock. Look at our give_me_next_number() example using the G_LOCK macros:

Here is an example for using the G_LOCK convenience macros:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
G_LOCK_DEFINE (current_number);

int
give_me_next_number (void)
{
  static int current_number = 0;
  int ret_val;

  G_LOCK (current_number);
  ret_val = current_number = calc_next_number (current_number);
  G_UNLOCK (current_number);

  return ret_val;
}

Parameters

name

the name of the lock

 

G_LOCK_DEFINE_STATIC()

#define G_LOCK_DEFINE_STATIC(name)

This works like G_LOCK_DEFINE, but it creates a static object.

Parameters

name

the name of the lock

 

G_LOCK_EXTERN()

#define G_LOCK_EXTERN(name)    

This declares a lock, that is defined with G_LOCK_DEFINE in another module.

Parameters

name

the name of the lock

 

G_LOCK()

#define G_LOCK(name)

Works like g_mutex_lock(), but for a lock defined with G_LOCK_DEFINE.

Parameters

name

the name of the lock

 

G_TRYLOCK()

#define G_TRYLOCK(name)

Works like g_mutex_trylock(), but for a lock defined with G_LOCK_DEFINE.

Parameters

name

the name of the lock

 

Returns

TRUE, if the lock could be locked.


G_UNLOCK()

#define G_UNLOCK(name)

Works like g_mutex_unlock(), but for a lock defined with G_LOCK_DEFINE.

Parameters

name

the name of the lock

 

g_rec_mutex_init ()

void
g_rec_mutex_init (GRecMutex *rec_mutex);

Initializes a GRecMutex so that it can be used.

This function is useful to initialize a recursive mutex that has been allocated on the stack, or as part of a larger structure.

It is not necessary to initialise a recursive mutex that has been statically allocated.

1
2
3
4
5
6
7
8
9
typedef struct {
  GRecMutex m;
  ...
} Blob;

Blob *b;

b = g_new (Blob, 1);
g_rec_mutex_init (&b->m);

Calling g_rec_mutex_init() on an already initialized GRecMutex leads to undefined behaviour.

To undo the effect of g_rec_mutex_init() when a recursive mutex is no longer needed, use g_rec_mutex_clear().

Parameters

rec_mutex

an uninitialized GRecMutex

 

Since: 2.32


g_rec_mutex_clear ()

void
g_rec_mutex_clear (GRecMutex *rec_mutex);

Frees the resources allocated to a recursive mutex with g_rec_mutex_init().

This function should not be used with a GRecMutex that has been statically allocated.

Calling g_rec_mutex_clear() on a locked recursive mutex leads to undefined behaviour.

Sine: 2.32

Parameters

rec_mutex

an initialized GRecMutex

 

g_rec_mutex_lock ()

void
g_rec_mutex_lock (GRecMutex *rec_mutex);

Locks rec_mutex . If rec_mutex is already locked by another thread, the current thread will block until rec_mutex is unlocked by the other thread. If rec_mutex is already locked by the current thread, the 'lock count' of rec_mutex is increased. The mutex will only become available again when it is unlocked as many times as it has been locked.

Parameters

rec_mutex

a GRecMutex

 

Since: 2.32


g_rec_mutex_trylock ()

gboolean
g_rec_mutex_trylock (GRecMutex *rec_mutex);

Tries to lock rec_mutex . If rec_mutex is already locked by another thread, it immediately returns FALSE. Otherwise it locks rec_mutex and returns TRUE.

Parameters

rec_mutex

a GRecMutex

 

Returns

TRUE if rec_mutex could be locked

Since: 2.32


g_rec_mutex_unlock ()

void
g_rec_mutex_unlock (GRecMutex *rec_mutex);

Unlocks rec_mutex . If another thread is blocked in a g_rec_mutex_lock() call for rec_mutex , it will become unblocked and can lock rec_mutex itself.

Calling g_rec_mutex_unlock() on a recursive mutex that is not locked by the current thread leads to undefined behaviour.

Parameters

rec_mutex

a GRecMutex

 

Since: 2.32


g_rw_lock_init ()

void
g_rw_lock_init (GRWLock *rw_lock);

Initializes a GRWLock so that it can be used.

This function is useful to initialize a lock that has been allocated on the stack, or as part of a larger structure. It is not necessary to initialise a reader-writer lock that has been statically allocated.

1
2
3
4
5
6
7
8
9
typedef struct {
  GRWLock l;
  ...
} Blob;

Blob *b;

b = g_new (Blob, 1);
g_rw_lock_init (&b->l);

To undo the effect of g_rw_lock_init() when a lock is no longer needed, use g_rw_lock_clear().

Calling g_rw_lock_init() on an already initialized GRWLock leads to undefined behaviour.

Parameters

rw_lock

an uninitialized GRWLock

 

Since: 2.32


g_rw_lock_clear ()

void
g_rw_lock_clear (GRWLock *rw_lock);

Frees the resources allocated to a lock with g_rw_lock_init().

This function should not be used with a GRWLock that has been statically allocated.

Calling g_rw_lock_clear() when any thread holds the lock leads to undefined behaviour.

Sine: 2.32

Parameters

rw_lock

an initialized GRWLock

 

g_rw_lock_writer_lock ()

void
g_rw_lock_writer_lock (GRWLock *rw_lock);

Obtain a write lock on rw_lock . If any thread already holds a read or write lock on rw_lock , the current thread will block until all other threads have dropped their locks on rw_lock .

Parameters

rw_lock

a GRWLock

 

Since: 2.32


g_rw_lock_writer_trylock ()

gboolean
g_rw_lock_writer_trylock (GRWLock *rw_lock);

Tries to obtain a write lock on rw_lock . If any other thread holds a read or write lock on rw_lock , it immediately returns FALSE. Otherwise it locks rw_lock and returns TRUE.

Parameters

rw_lock

a GRWLock

 

Returns

TRUE if rw_lock could be locked

Since: 2.32


g_rw_lock_writer_unlock ()

void
g_rw_lock_writer_unlock (GRWLock *rw_lock);

Release a write lock on rw_lock .

Calling g_rw_lock_writer_unlock() on a lock that is not held by the current thread leads to undefined behaviour.

Parameters

rw_lock

a GRWLock

 

Since: 2.32


g_rw_lock_reader_lock ()

void
g_rw_lock_reader_lock (GRWLock *rw_lock);

Obtain a read lock on rw_lock . If another thread currently holds the write lock on rw_lock or blocks waiting for it, the current thread will block. Read locks can be taken recursively.

It is implementation-defined how many threads are allowed to hold read locks on the same lock simultaneously. If the limit is hit, or if a deadlock is detected, a critical warning will be emitted.

Parameters

rw_lock

a GRWLock

 

Since: 2.32


g_rw_lock_reader_trylock ()

gboolean
g_rw_lock_reader_trylock (GRWLock *rw_lock);

Tries to obtain a read lock on rw_lock and returns TRUE if the read lock was successfully obtained. Otherwise it returns FALSE.

Parameters

rw_lock

a GRWLock

 

Returns

TRUE if rw_lock could be locked

Since: 2.32


g_rw_lock_reader_unlock ()

void
g_rw_lock_reader_unlock (GRWLock *rw_lock);

Release a read lock on rw_lock .

Calling g_rw_lock_reader_unlock() on a lock that is not held by the current thread leads to undefined behaviour.

Parameters

rw_lock

a GRWLock

 

Since: 2.32


g_cond_init ()

void
g_cond_init (GCond *cond);

Initialises a GCond so that it can be used.

This function is useful to initialise a GCond that has been allocated as part of a larger structure. It is not necessary to initialise a GCond that has been statically allocated.

To undo the effect of g_cond_init() when a GCond is no longer needed, use g_cond_clear().

Calling g_cond_init() on an already-initialised GCond leads to undefined behaviour.

Parameters

cond

an uninitialized GCond

 

Since: 2.32


g_cond_clear ()

void
g_cond_clear (GCond *cond);

Frees the resources allocated to a GCond with g_cond_init().

This function should not be used with a GCond that has been statically allocated.

Calling g_cond_clear() for a GCond on which threads are blocking leads to undefined behaviour.

Parameters

cond

an initialised GCond

 

Since: 2.32


g_cond_wait ()

void
g_cond_wait (GCond *cond,
             GMutex *mutex);

Atomically releases mutex and waits until cond is signalled. When this function returns, mutex is locked again and owned by the calling thread.

When using condition variables, it is possible that a spurious wakeup may occur (ie: g_cond_wait() returns even though g_cond_signal() was not called). It's also possible that a stolen wakeup may occur. This is when g_cond_signal() is called, but another thread acquires mutex before this thread and modifies the state of the program in such a way that when g_cond_wait() is able to return, the expected condition is no longer met.

For this reason, g_cond_wait() must always be used in a loop. See the documentation for GCond for a complete example.

Parameters

cond

a GCond

 

mutex

a GMutex that is currently locked

 

g_cond_timed_wait ()

gboolean
g_cond_timed_wait (GCond *cond,
                   GMutex *mutex,
                   GTimeVal *abs_time);

g_cond_timed_wait has been deprecated since version 2.32 and should not be used in newly-written code.

Use g_cond_wait_until() instead.

Waits until this thread is woken up on cond , but not longer than until the time specified by abs_time . The mutex is unlocked before falling asleep and locked again before resuming.

If abs_time is NULL, g_cond_timed_wait() acts like g_cond_wait().

This function can be used even if g_thread_init() has not yet been called, and, in that case, will immediately return TRUE.

To easily calculate abs_time a combination of g_get_current_time() and g_time_val_add() can be used.

Parameters

cond

a GCond

 

mutex

a GMutex that is currently locked

 

abs_time

a GTimeVal, determining the final time

 

Returns

TRUE if cond was signalled, or FALSE on timeout


g_cond_wait_until ()

gboolean
g_cond_wait_until (GCond *cond,
                   GMutex *mutex,
                   gint64 end_time);

Waits until either cond is signalled or end_time has passed.

As with g_cond_wait() it is possible that a spurious or stolen wakeup could occur. For that reason, waiting on a condition variable should always be in a loop, based on an explicitly-checked predicate.

TRUE is returned if the condition variable was signalled (or in the case of a spurious wakeup). FALSE is returned if end_time has passed.

The following code shows how to correctly perform a timed wait on a condition variable (extending the example presented in the documentation for GCond):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
gpointer
pop_data_timed (void)
{
  gint64 end_time;
  gpointer data;

  g_mutex_lock (&data_mutex);

  end_time = g_get_monotonic_time () + 5 * G_TIME_SPAN_SECOND;
  while (!current_data)
    if (!g_cond_wait_until (&data_cond, &data_mutex, end_time))
      {
        // timeout has passed.
        g_mutex_unlock (&data_mutex);
        return NULL;
      }

  // there is data for us
  data = current_data;
  current_data = NULL;

  g_mutex_unlock (&data_mutex);

  return data;
}

Notice that the end time is calculated once, before entering the loop and reused. This is the motivation behind the use of absolute time on this API -- if a relative time of 5 seconds were passed directly to the call and a spurious wakeup occurred, the program would have to start over waiting again (which would lead to a total wait time of more than 5 seconds).

Parameters

cond

a GCond

 

mutex

a GMutex that is currently locked

 

end_time

the monotonic time to wait until

 

Returns

TRUE on a signal, FALSE on a timeout

Since: 2.32


g_cond_signal ()

void
g_cond_signal (GCond *cond);

If threads are waiting for cond , at least one of them is unblocked. If no threads are waiting for cond , this function has no effect. It is good practice to hold the same lock as the waiting thread while calling this function, though not required.

Parameters

cond

a GCond

 

g_cond_broadcast ()

void
g_cond_broadcast (GCond *cond);

If threads are waiting for cond , all of them are unblocked. If no threads are waiting for cond , this function has no effect. It is good practice to lock the same mutex as the waiting threads while calling this function, though not required.

Parameters

cond

a GCond

 

G_PRIVATE_INIT()

#define G_PRIVATE_INIT(notify)

A macro to assist with the static initialisation of a GPrivate.

This macro is useful for the case that a GDestroyNotify function should be associated with the key. This is needed when the key will be used to point at memory that should be deallocated when the thread exits.

Additionally, the GDestroyNotify will also be called on the previous value stored in the key when g_private_replace() is used.

If no GDestroyNotify is needed, then use of this macro is not required -- if the GPrivate is declared in static scope then it will be properly initialised by default (ie: to all zeros). See the examples below.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
static GPrivate name_key = G_PRIVATE_INIT (g_free);

// return value should not be freed
const gchar *
get_local_name (void)
{
  return g_private_get (&name_key);
}

void
set_local_name (const gchar *name)
{
  g_private_replace (&name_key, g_strdup (name));
}


static GPrivate count_key;   // no free function

gint
get_local_count (void)
{
  return GPOINTER_TO_INT (g_private_get (&count_key));
}

void
set_local_count (gint count)
{
  g_private_set (&count_key, GINT_TO_POINTER (count));
}

Parameters

notify

a GDestroyNotify

 

Since: 2.32


g_private_get ()

gpointer
g_private_get (GPrivate *key);

Returns the current value of the thread local variable key .

If the value has not yet been set in this thread, NULL is returned. Values are never copied between threads (when a new thread is created, for example).

Parameters

key

a GPrivate

 

Returns

the thread-local value


g_private_set ()

void
g_private_set (GPrivate *key,
               gpointer value);

Sets the thread local variable key to have the value value in the current thread.

This function differs from g_private_replace() in the following way: the GDestroyNotify for key is not called on the old value.

Parameters

key

a GPrivate

 

value

the new value

 

g_private_replace ()

void
g_private_replace (GPrivate *key,
                   gpointer value);

Sets the thread local variable key to have the value value in the current thread.

This function differs from g_private_set() in the following way: if the previous value was non-NULL then the GDestroyNotify handler for key is run on it.

Parameters

key

a GPrivate

 

value

the new value

 

Since: 2.32


g_once()

#define             g_once(once, func, arg)

The first call to this routine by a process with a given GOnce struct calls func with the given argument. Thereafter, subsequent calls to g_once() with the same GOnce struct do not call func again, but return the stored result of the first call. On return from g_once(), the status of once will be G_ONCE_STATUS_READY.

For example, a mutex or a thread-specific data key must be created exactly once. In a threaded environment, calling g_once() ensures that the initialization is serialized across multiple threads.

Calling g_once() recursively on the same GOnce struct in func will lead to a deadlock.

1
2
3
4
5
6
7
8
9
gpointer
get_debug_flags (void)
{
  static GOnce my_once = G_ONCE_INIT;

  g_once (&my_once, parse_debug_flags, NULL);

  return my_once.retval;
}

Parameters

once

a GOnce structure

 

func

the GThreadFunc function associated to once . This function is called only once, regardless of the number of times it and its associated GOnce struct are passed to g_once().

 

arg

data to be passed to func

 

Since: 2.4


g_once_init_enter ()

gboolean
g_once_init_enter (volatile void *location);

Function to be called when starting a critical initialization section. The argument location must point to a static 0-initialized variable that will be set to a value other than 0 at the end of the initialization section. In combination with g_once_init_leave() and the unique address value_location , it can be ensured that an initialization section will be executed only once during a program's life time, and that concurrent threads are blocked until initialization completed. To be used in constructs like this:

1
2
3
4
5
6
7
8
9
10
static gsize initialization_value = 0;

if (g_once_init_enter (&initialization_value))
  {
    gsize setup_value = 42; // initialization code here

    g_once_init_leave (&initialization_value, setup_value);
  }

// use initialization_value here

Parameters

location

location of a static initializable variable containing 0.

[not nullable]

Returns

TRUE if the initialization section should be entered, FALSE and blocks otherwise

Since: 2.14


g_once_init_leave ()

void
g_once_init_leave (volatile void *location,
                   gsize result);

Counterpart to g_once_init_enter(). Expects a location of a static 0-initialized initialization variable, and an initialization value other than 0. Sets the variable to the initialization value, and releases concurrent threads blocking in g_once_init_enter() on this initialization variable.

Parameters

location

location of a static initializable variable containing 0.

[not nullable]

result

new non-0 value for *value_location

 

Since: 2.14


g_bit_lock ()

void
g_bit_lock (volatile gint *address,
            gint lock_bit);

Sets the indicated lock_bit in address . If the bit is already set, this call will block until g_bit_unlock() unsets the corresponding bit.

Attempting to lock on two different bits within the same integer is not supported and will very probably cause deadlocks.

The value of the bit that is set is (1u << bit ). If bit is not between 0 and 31 then the result is undefined.

This function accesses address atomically. All other accesses to address must be atomic in order for this function to work reliably.

Parameters

address

a pointer to an integer

 

lock_bit

a bit value between 0 and 31

 

Since: 2.24


g_bit_trylock ()

gboolean
g_bit_trylock (volatile gint *address,
               gint lock_bit);

Sets the indicated lock_bit in address , returning TRUE if successful. If the bit is already set, returns FALSE immediately.

Attempting to lock on two different bits within the same integer is not supported.

The value of the bit that is set is (1u << bit ). If bit is not between 0 and 31 then the result is undefined.

This function accesses address atomically. All other accesses to address must be atomic in order for this function to work reliably.

Parameters

address

a pointer to an integer

 

lock_bit

a bit value between 0 and 31

 

Returns

TRUE if the lock was acquired

Since: 2.24


g_bit_unlock ()

void
g_bit_unlock (volatile gint *address,
              gint lock_bit);

Clears the indicated lock_bit in address . If another thread is currently blocked in g_bit_lock() on this same bit then it will be woken up.

This function accesses address atomically. All other accesses to address must be atomic in order for this function to work reliably.

Parameters

address

a pointer to an integer

 

lock_bit

a bit value between 0 and 31

 

Since: 2.24


g_pointer_bit_lock ()

void
g_pointer_bit_lock (volatile void *address,
                    gint lock_bit);

This is equivalent to g_bit_lock, but working on pointers (or other pointer-sized values).

For portability reasons, you may only lock on the bottom 32 bits of the pointer.

Parameters

address

a pointer to a gpointer-sized value.

[not nullable]

lock_bit

a bit value between 0 and 31

 

Since: 2.30


g_pointer_bit_trylock ()

gboolean
g_pointer_bit_trylock (volatile void *address,
                       gint lock_bit);

This is equivalent to g_bit_trylock, but working on pointers (or other pointer-sized values).

For portability reasons, you may only lock on the bottom 32 bits of the pointer.

Parameters

address

a pointer to a gpointer-sized value.

[not nullable]

lock_bit

a bit value between 0 and 31

 

Returns

TRUE if the lock was acquired

Since: 2.30


g_pointer_bit_unlock ()

void
g_pointer_bit_unlock (volatile void *address,
                      gint lock_bit);

This is equivalent to g_bit_unlock, but working on pointers (or other pointer-sized values).

For portability reasons, you may only lock on the bottom 32 bits of the pointer.

Parameters

address

a pointer to a gpointer-sized value.

[not nullable]

lock_bit

a bit value between 0 and 31

 

Since: 2.30


g_get_num_processors ()

guint
g_get_num_processors (void);

Determine the approximate number of threads that the system will schedule simultaneously for this process. This is intended to be used as a parameter to g_thread_pool_new() for CPU bound tasks and similar cases.

Returns

Number of schedulable threads, always greater than 0

Since: 2.36

Types and Values

G_THREAD_ERROR

#define G_THREAD_ERROR g_thread_error_quark ()

The error domain of the GLib thread subsystem.


enum GThreadError

Possible errors of thread related functions.

Members

G_THREAD_ERROR_AGAIN

a thread couldn't be created due to resource shortage. Try again later.

 

GThread

typedef struct {
} GThread;

The GThread struct represents a running thread. This struct is returned by g_thread_new() or g_thread_try_new(). You can obtain the GThread struct representing the current thread by calling g_thread_self().

GThread is refcounted, see g_thread_ref() and g_thread_unref(). The thread represented by it holds a reference while it is running, and g_thread_join() consumes the reference that it is given, so it is normally not necessary to manage GThread references explicitly.

The structure is opaque -- none of its fields may be directly accessed.


union GMutex

The GMutex struct is an opaque data structure to represent a mutex (mutual exclusion). It can be used to protect data against shared access.

Take for example the following function:

1
2
3
4
5
6
7
8
9
10
11
int
give_me_next_number (void)
{
  static int current_number = 0;

  // now do a very complicated calculation to calculate the new
  // number, this might for example be a random number generator
  current_number = calc_next_number (current_number);

  return current_number;
}

It is easy to see that this won't work in a multi-threaded application. There current_number must be protected against shared access. A GMutex can be used as a solution to this problem:

1
2
3
4
5
6
7
8
9
10
11
12
13
int
give_me_next_number (void)
{
  static GMutex mutex;
  static int current_number = 0;
  int ret_val;

  g_mutex_lock (&mutex);
  ret_val = current_number = calc_next_number (current_number);
  g_mutex_unlock (&mutex);

  return ret_val;
}

Notice that the GMutex is not initialised to any particular value. Its placement in static storage ensures that it will be initialised to all-zeros, which is appropriate.

If a GMutex is placed in other contexts (eg: embedded in a struct) then it must be explicitly initialised using g_mutex_init().

A GMutex should only be accessed via g_mutex_ functions.


GMutexLocker

typedef void GMutexLocker;

Opaque type. See g_mutex_locker_new() for details.

Since: 2.44


struct GRecMutex

struct GRecMutex {
};

The GRecMutex struct is an opaque data structure to represent a recursive mutex. It is similar to a GMutex with the difference that it is possible to lock a GRecMutex multiple times in the same thread without deadlock. When doing so, care has to be taken to unlock the recursive mutex as often as it has been locked.

If a GRecMutex is allocated in static storage then it can be used without initialisation. Otherwise, you should call g_rec_mutex_init() on it and g_rec_mutex_clear() when done.

A GRecMutex should only be accessed with the g_rec_mutex_ functions.

Since: 2.32


struct GRWLock

struct GRWLock {
};

The GRWLock struct is an opaque data structure to represent a reader-writer lock. It is similar to a GMutex in that it allows multiple threads to coordinate access to a shared resource.

The difference to a mutex is that a reader-writer lock discriminates between read-only ('reader') and full ('writer') access. While only one thread at a time is allowed write access (by holding the 'writer' lock via g_rw_lock_writer_lock()), multiple threads can gain simultaneous read-only access (by holding the 'reader' lock via g_rw_lock_reader_lock()).

Here is an example for an array with access functions:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
GRWLock lock;
GPtrArray *array;

gpointer
my_array_get (guint index)
{
  gpointer retval = NULL;

  if (!array)
    return NULL;

  g_rw_lock_reader_lock (&lock);
  if (index < array->len)
    retval = g_ptr_array_index (array, index);
  g_rw_lock_reader_unlock (&lock);

  return retval;
}

void
my_array_set (guint index, gpointer data)
{
  g_rw_lock_writer_lock (&lock);

  if (!array)
    array = g_ptr_array_new ();

  if (index >= array->len)
    g_ptr_array_set_size (array, index+1);
  g_ptr_array_index (array, index) = data;

  g_rw_lock_writer_unlock (&lock);
}

This example shows an array which can be accessed by many readers (the my_array_get() function) simultaneously, whereas the writers (the my_array_set() function) will only be allowed one at a time and only if no readers currently access the array. This is because of the potentially dangerous resizing of the array. Using these functions is fully multi-thread safe now.

If a GRWLock is allocated in static storage then it can be used without initialisation. Otherwise, you should call g_rw_lock_init() on it and g_rw_lock_clear() when done.

A GRWLock should only be accessed with the g_rw_lock_ functions.

Since: 2.32


struct GCond

struct GCond {
};

The GCond struct is an opaque data structure that represents a condition. Threads can block on a GCond if they find a certain condition to be false. If other threads change the state of this condition they signal the GCond, and that causes the waiting threads to be woken up.

Consider the following example of a shared variable. One or more threads can wait for data to be published to the variable and when another thread publishes the data, it can signal one of the waiting threads to wake up to collect the data.

Here is an example for using GCond to block a thread until a condition is satisfied:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
gpointer current_data = NULL;
GMutex data_mutex;
GCond data_cond;

void
push_data (gpointer data)
{
  g_mutex_lock (&data_mutex);
  current_data = data;
  g_cond_signal (&data_cond);
  g_mutex_unlock (&data_mutex);
}

gpointer
pop_data (void)
{
  gpointer data;

  g_mutex_lock (&data_mutex);
  while (!current_data)
    g_cond_wait (&data_cond, &data_mutex);
  data = current_data;
  current_data = NULL;
  g_mutex_unlock (&data_mutex);

  return data;
}

Whenever a thread calls pop_data() now, it will wait until current_data is non-NULL, i.e. until some other thread has called push_data().

The example shows that use of a condition variable must always be paired with a mutex. Without the use of a mutex, there would be a race between the check of current_data by the while loop in pop_data() and waiting. Specifically, another thread could set current_data after the check, and signal the cond (with nobody waiting on it) before the first thread goes to sleep. GCond is specifically useful for its ability to release the mutex and go to sleep atomically.

It is also important to use the g_cond_wait() and g_cond_wait_until() functions only inside a loop which checks for the condition to be true. See g_cond_wait() for an explanation of why the condition may not be true even after it returns.

If a GCond is allocated in static storage then it can be used without initialisation. Otherwise, you should call g_cond_init() on it and g_cond_clear() when done.

A GCond should only be accessed via the g_cond_ functions.


struct GPrivate

struct GPrivate {
};

The GPrivate struct is an opaque data structure to represent a thread-local data key. It is approximately equivalent to the pthread_setspecific()/pthread_getspecific() APIs on POSIX and to TlsSetValue()/TlsGetValue() on Windows.

If you don't already know why you might want this functionality, then you probably don't need it.

GPrivate is a very limited resource (as far as 128 per program, shared between all libraries). It is also not possible to destroy a GPrivate after it has been used. As such, it is only ever acceptable to use GPrivate in static scope, and even then sparingly so.

See G_PRIVATE_INIT() for a couple of examples.

The GPrivate structure should be considered opaque. It should only be accessed via the g_private_ functions.


struct GOnce

struct GOnce {
  volatile GOnceStatus status;
  volatile gpointer retval;
};

A GOnce struct controls a one-time initialization function. Any one-time initialization function must have its own unique GOnce struct.

Members

volatile GOnceStatus status;

the status of the GOnce

 

volatile gpointer retval;

the value returned by the call to the function, if status is G_ONCE_STATUS_READY

 

Since: 2.4


enum GOnceStatus

The possible statuses of a one-time initialization function controlled by a GOnce struct.

Members

G_ONCE_STATUS_NOTCALLED

the function has not been called yet.

 

G_ONCE_STATUS_PROGRESS

the function call is currently in progress.

 

G_ONCE_STATUS_READY

the function has been called.

 

Since: 2.4


G_ONCE_INIT

#define G_ONCE_INIT { G_ONCE_STATUS_NOTCALLED, NULL }

A GOnce must be initialized with this macro before it can be used.

1
GOnce my_once = G_ONCE_INIT;

Since: 2.4

© manpagez.com 2000-2024
Individual documents may contain additional copyright information.