gtk_adjustment_new ()

GtkAdjustment *
gtk_adjustment_new (gdouble value,
                    gdouble lower,
                    gdouble upper,
                    gdouble step_increment,
                    gdouble page_increment,
                    gdouble page_size);

Creates a new GtkAdjustment.

gtk_adjustment_get_value ()

gdouble
gtk_adjustment_get_value (GtkAdjustment *adjustment);

Gets the current value of the adjustment. See gtk_adjustment_set_value().

gtk_adjustment_set_value ()

void
gtk_adjustment_set_value (GtkAdjustment *adjustment,
                          gdouble value);

Sets the GtkAdjustment value. The value is clamped to lie between “lower” and “upper”.

Note that for adjustments which are used in a GtkScrollbar, the effective range of allowed values goes from “lower” to “upper” - “page-size”.

gtk_adjustment_clamp_page ()

void
gtk_adjustment_clamp_page (GtkAdjustment *adjustment,
                           gdouble lower,
                           gdouble upper);

Updates the “value” property to ensure that the range between lower and upper is in the current page (i.e. between “value” and “value” + “page-size”). If the range is larger than the page size, then only the start of it will be in the current page.

A “value-changed” signal will be emitted if the value is changed.

gtk_adjustment_changed ()

void
gtk_adjustment_changed (GtkAdjustment *adjustment);

Emits a “changed” signal from the GtkAdjustment. This is typically called by the owner of the GtkAdjustment after it has changed any of the GtkAdjustment properties other than the value.

gtk_adjustment_value_changed ()

void
gtk_adjustment_value_changed (GtkAdjustment *adjustment);

Emits a “value-changed” signal from the GtkAdjustment. This is typically called by the owner of the GtkAdjustment after it has changed the “value” property.

gtk_adjustment_configure ()

void
gtk_adjustment_configure (GtkAdjustment *adjustment,
                          gdouble value,
                          gdouble lower,
                          gdouble upper,
                          gdouble step_increment,
                          gdouble page_increment,
                          gdouble page_size);

Sets all properties of the adjustment at once.

Use this function to avoid multiple emissions of the “changed” signal. See gtk_adjustment_set_lower() for an alternative way of compressing multiple emissions of “changed” into one.

Since: 2.14

gtk_adjustment_get_lower ()

gdouble
gtk_adjustment_get_lower (GtkAdjustment *adjustment);

Retrieves the minimum value of the adjustment.

Since: 2.14

gtk_adjustment_get_page_increment ()

gdouble
gtk_adjustment_get_page_increment (GtkAdjustment *adjustment);

Retrieves the page increment of the adjustment.

Since: 2.14

gtk_adjustment_get_page_size ()

gdouble
gtk_adjustment_get_page_size (GtkAdjustment *adjustment);

Retrieves the page size of the adjustment.

Since: 2.14

gtk_adjustment_get_step_increment ()

gdouble
gtk_adjustment_get_step_increment (GtkAdjustment *adjustment);

Retrieves the step increment of the adjustment.

Since: 2.14

gtk_adjustment_get_minimum_increment ()

gdouble
gtk_adjustment_get_minimum_increment (GtkAdjustment *adjustment);

Gets the smaller of step increment and page increment.

Since: 3.2

gtk_adjustment_get_upper ()

gdouble
gtk_adjustment_get_upper (GtkAdjustment *adjustment);

Retrieves the maximum value of the adjustment.

Since: 2.14

gtk_adjustment_set_lower ()

void
gtk_adjustment_set_lower (GtkAdjustment *adjustment,
                          gdouble lower);

Sets the minimum value of the adjustment.

When setting multiple adjustment properties via their individual setters, multiple “changed” signals will be emitted. However, since the emission of the “changed” signal is tied to the emission of the “notify” signals of the changed properties, it’s possible to compress the “changed” signals into one by calling g_object_freeze_notify() and g_object_thaw_notify() around the calls to the individual setters.

Alternatively, using a single g_object_set() for all the properties to change, or using gtk_adjustment_configure() has the same effect of compressing “changed” emissions.

Since: 2.14

gtk_adjustment_set_page_increment ()

void
gtk_adjustment_set_page_increment (GtkAdjustment *adjustment,
                                   gdouble page_increment);

Sets the page increment of the adjustment.

See gtk_adjustment_set_lower() about how to compress multiple emissions of the “changed” signal when setting multiple adjustment properties.

Since: 2.14

gtk_adjustment_set_page_size ()

void
gtk_adjustment_set_page_size (GtkAdjustment *adjustment,
                              gdouble page_size);

Sets the page size of the adjustment.

See gtk_adjustment_set_lower() about how to compress multiple emissions of the GtkAdjustment::changed signal when setting multiple adjustment properties.

Since: 2.14

gtk_adjustment_set_step_increment ()

void
gtk_adjustment_set_step_increment (GtkAdjustment *adjustment,
                                   gdouble step_increment);

Sets the step increment of the adjustment.

See gtk_adjustment_set_lower() about how to compress multiple emissions of the “changed” signal when setting multiple adjustment properties.

Since: 2.14

gtk_adjustment_set_upper ()

void
gtk_adjustment_set_upper (GtkAdjustment *adjustment,
                          gdouble upper);

Sets the maximum value of the adjustment.

Note that values will be restricted by upper - page-size if the page-size property is nonzero.

See gtk_adjustment_set_lower() about how to compress multiple emissions of the “changed” signal when setting multiple adjustment properties.

Since: 2.14

GtkAdjustment

typedef struct _GtkAdjustment GtkAdjustment;

The GtkAdjustment contains only private fields and should not be directly accessed.

The “lower” property

  “lower”                    double

The minimum value of the adjustment.

Owner: GtkAdjustment

Flags: Read / Write

Default value: 0

Since: 2.4

The “page-increment” property

  “page-increment”           double

The page increment of the adjustment.

Owner: GtkAdjustment

Flags: Read / Write

Default value: 0

Since: 2.4

The “page-size” property

  “page-size”                double

The page size of the adjustment. Note that the page-size is irrelevant and should be set to zero if the adjustment is used for a simple scalar value, e.g. in a GtkSpinButton.

Owner: GtkAdjustment

Flags: Read / Write

Default value: 0

Since: 2.4

The “step-increment” property

  “step-increment”           double

The step increment of the adjustment.

Owner: GtkAdjustment

Flags: Read / Write

Default value: 0

Since: 2.4

The “upper” property

  “upper”                    double

The maximum value of the adjustment. Note that values will be restricted by upper - page-size if the page-size property is nonzero.

Owner: GtkAdjustment

Flags: Read / Write

Default value: 0

Since: 2.4

The “value” property

  “value”                    double

The value of the adjustment.

Owner: GtkAdjustment

Flags: Read / Write

Default value: 0

Since: 2.4

The “changed” signal

void
user_function (GtkAdjustment *adjustment,
               gpointer       user_data)

Emitted when one or more of the GtkAdjustment properties have been changed, other than the “value” property.

Flags: No Recursion

The “value-changed” signal

void
user_function (GtkAdjustment *adjustment,
               gpointer       user_data)

Emitted when the “value” property has been changed.

Flags: No Recursion