vips_merge ()

int
vips_merge (VipsImage *ref,
            VipsImage *sec,
            VipsImage **out,
            VipsDirection direction,
            int dx,
            int dy,
            ...);

Optional arguments:

This operation joins two images left-right (with ref on the left) or up-down (with ref above) with a smooth seam.

If the number of bands differs, one of the images must have one band. In this case, an n-band image is formed from the one-band image by joining n copies of the one-band image together, and then the two n-band images are operated upon.

The two input images are cast up to the smallest common type (see table Smallest common format in

dx and dy give the displacement of sec relative to ref , in other words, the vector to get from the origin of sec to the origin of ref , in other words, dx will generally be a negative number.

mblend limits the maximum width of the blend area. A value of "-1" means "unlimited". The two images are blended with a raised cosine.

Pixels with all bands equal to zero are "transparent", that is, zero pixels in the overlap area do not contribute to the merge. This makes it possible to join non-rectangular images.

See also: vips_mosaic(), vips_insert().

vips_mosaic ()

int
vips_mosaic (VipsImage *ref,
             VipsImage *sec,
             VipsImage **out,
             VipsDirection direction,
             int xref,
             int yref,
             int xsec,
             int ysec,
             ...);

Optional arguments:

This operation joins two images left-right (with ref on the left) or top-bottom (with ref above) given an approximate overlap.

sec is positioned so that the pixel (xsec , ysec ) in sec lies on top of the pixel (xref , yref ) in ref . The overlap area is divided into three sections, 20 high-contrast points in band bandno of image ref are found in each, and a window of pixels of size hwindow around each high-contrast point is searched for in sec over an area of harea .

A linear model is fitted to the 60 tie-points, points a long way from the fit are discarded, and the model refitted until either too few points remain or the model reaches good agreement.

The detected displacement is used with vips_merge() to join the two images together.

You can read out the detected transform with dx0 , dy0 , scale1 , angle1 , dx1 , dy1 .

See also: vips_merge(), vips_insert().

vips_mosaic1 ()

int
vips_mosaic1 (VipsImage *ref,
              VipsImage *sec,
              VipsImage **out,
              VipsDirection direction,
              int xr1,
              int yr1,
              int xs1,
              int ys1,
              int xr2,
              int yr2,
              int xs2,
              int ys2,
              ...);

Optional arguments:

This operation joins two images top-bottom (with sec on the right) or left-right (with sec at the bottom) given an approximate pair of tie-points. sec is scaled and rotated as necessary before the join.

If search is TRUE, before performing the transformation, the tie-points are improved by searching an area of sec of size harea for a object of size hwindow in ref .

mblend limits the maximum size of the blend area. A value of "-1" means "unlimited". The two images are blended with a raised cosine.

Pixels with all bands equal to zero are "transparent", that is, zero pixels in the overlap area do not contribute to the merge. This makes it possible to join non-rectangular images.

If the number of bands differs, one of the images must have one band. In this case, an n-band image is formed from the one-band image by joining n copies of the one-band image together, and then the two n-band images are operated upon.

The two input images are cast up to the smallest common type (see table Smallest common format in

See also: vips_merge(), vips_insert(), vips_globalbalance().

vips_match ()

int
vips_match (VipsImage *ref,
            VipsImage *sec,
            VipsImage **out,
            int xr1,
            int yr1,
            int xs1,
            int ys1,
            int xr2,
            int yr2,
            int xs2,
            int ys2,
            ...);

Optional arguments:

Scale, rotate and translate sec so that the tie-points line up.

If search is TRUE, before performing the transformation, the tie-points are improved by searching an area of sec of size harea for a match of size hwindow to ref .

This function will only work well for small rotates and scales.

vips_globalbalance ()

int
vips_globalbalance (VipsImage *in,
                    VipsImage **out,
                    ...);

Optional arguments:

vips_globalbalance() can be used to remove contrast differences in an assembled mosaic.

It reads the History field attached to in and builds a list of the source images that were used to make the mosaic and the position that each ended up at in the final image.

It opens each of the source images in turn and extracts all parts which overlap with any of the other images. It finds the average values in the overlap areas and uses least-mean-square to find a set of correction factors which will minimise overlap differences. It uses gamma to gamma-correct the source images before calculating the factors. A value of 1.0 will stop this.

Each of the source images is transformed with the appropriate correction factor, then the mosaic is reassembled. out is VIPS_FORMAT_FLOAT, but if int_output is set, the output image is the same format as the input images.

There are some conditions that must be met before this operation can work: the source images must all be present under the filenames recorded in the history on in , and the mosaic must have been built using only operations in this package.

See also: vips_remosaic().

[method]

vips_remosaic ()

int
vips_remosaic (VipsImage *in,
               VipsImage **out,
               const char *old_str,
               const char *new_str,
               ...);

vips_remosaic() works rather as vips_globalbalance(). It takes apart the mosaiced image in and rebuilds it, substituting images.

Unlike vips_globalbalance(), images are substituted based on their file‐ names. The rightmost occurrence of the string old_str is swapped for new_str , that file is opened, and that image substituted for the old image.

It's convenient for multispectral images. You can mosaic one band, then use that mosaic as a template for mosaicing the others automatically.

See also: vips_globalbalance().

[method]

vips_matrixinvert ()

int
vips_matrixinvert (VipsImage *m,
                   VipsImage **out,
                   ...);

This operation calculates the inverse of the matrix represented in m . The scale and offset members of the input matrix are ignored.

See also: vips_matrixload().

[method]