Top |
Properties
guint | clock-rate | Read / Write |
guint | packet-redundancy | Read / Write |
guint | pt | Read / Write |
guint | seqnum | Read |
gint | seqnum-offset | Read / Write |
guint | ssrc | Read / Write |
guint | timestamp | Read |
gint | timestamp-offset | Read / Write |
Object Hierarchy
GObject ╰── GInitiallyUnowned ╰── GstObject ╰── GstElement ╰── GstBaseSrc ╰── GstRTPDTMFSrc
Description
The RTPDTMFSrc element generates RTP DTMF (RFC 2833) event packets on request from application. The application communicates the beginning and end of a DTMF event using custom upstream gstreamer events. To report a DTMF event, an application must send an event of type GST_EVENT_CUSTOM_UPSTREAM, having a structure of name "dtmf-event" with fields set according to the following table:
Name | GType | Possible values | Purpose |
---|---|---|---|
type | G_TYPE_INT | 0-1 | The application uses this field to specify which of the two methods specified in RFC 2833 to use. The value should be 0 for tones and 1 for named events. Tones are specified by their frequencies and events are specied by their number. This element can only take events as input. Do not confuse with "method" which specified the output. |
number | G_TYPE_INT | 0-15 | The event number. |
volume | G_TYPE_INT | 0-36 | This field describes the power level of the tone, expressed in dBm0 after dropping the sign. Power levels range from 0 to -63 dBm0. The range of valid DTMF is from 0 to -36 dBm0. Can be omitted if start is set to FALSE. |
start | G_TYPE_BOOLEAN | True or False | Whether the event is starting or ending. |
method | G_TYPE_INT | 1 | The method used for sending event, this element will react if this field is absent or 1. |
For example, the following code informs the pipeline (and in turn, the RTPDTMFSrc element inside the pipeline) about the start of an RTP DTMF named event '1' of volume -25 dBm0:
structure = gst_structure_new ("dtmf-event", "type", G_TYPE_INT, 1, "number", G_TYPE_INT, 1, "volume", G_TYPE_INT, 25, "start", G_TYPE_BOOLEAN, TRUE, NULL); event = gst_event_new_custom (GST_EVENT_CUSTOM_UPSTREAM, structure); gst_element_send_event (pipeline, event);
When a DTMF tone actually starts or stop, a "dtmf-event-processed" element GstMessage with the same fields as the "dtmf-event" GstEvent that was used to request the event. Also, if any event has not been processed when the element goes from the PAUSED to the READY state, then a "dtmf-event-dropped" message is posted on the GstBus in the order that they were received.
Synopsis
Property Details
The “clock-rate”
property
“clock-rate” guint
The clock-rate at which to generate the dtmf packets.
Flags: Read / Write
Default value: 8000
The “packet-redundancy”
property
“packet-redundancy” guint
Number of packets to send to indicate start and stop dtmf events.
Flags: Read / Write
Allowed values: [1,5]
Default value: 1
The “pt”
property
“pt” guint
The payload type of the packets.
Flags: Read / Write
Allowed values: <= 128
Default value: 96
The “seqnum”
property
“seqnum” guint
The RTP sequence number of the last processed packet.
Flags: Read
Default value: 0
The “seqnum-offset”
property
“seqnum-offset” gint
Offset to add to all outgoing seqnum (-1 = random).
Flags: Read / Write
Allowed values: >= G_MAXULONG
Default value: -1
The “ssrc”
property
“ssrc” guint
The SSRC of the packets (-1 == random).
Flags: Read / Write
Default value: 4294967295
The “timestamp”
property
“timestamp” guint
The RTP timestamp of the last processed packet.
Flags: Read
Default value: 0
The “timestamp-offset”
property
“timestamp-offset” gint
Offset to add to all outgoing timestamps (-1 = random).
Flags: Read / Write
Allowed values: >= G_MAXULONG
Default value: -1