manpagez: man pages & more
html files: gst-plugins-good-plugins-1.0
Home | html | info | man

rtspsrc

rtspsrc

Properties

gboolean debug Read / Write
gchar * location Read / Write
GstRTSPLowerTrans protocols Read / Write
guint retry Read / Write
guint64 timeout Read / Write
guint latency Read / Write
guint64 tcp-timeout Read / Write
guint64 connection-speed Read / Write
GstRTSPNatMethod nat-method Read / Write
gboolean do-rtcp Read / Write
gchar * proxy Read / Write
guint rtp-blocksize Read / Write
gchar * user-id Read / Write
gchar * user-pw Read / Write
GstRTSPSrcBufferMode buffer-mode Read / Write
gchar * port-range Read / Write
gint udp-buffer-size Read / Write
gboolean short-header Read / Write
gboolean do-rtsp-keep-alive Read / Write
gboolean drop-on-latency Read / Write
guint probation Read / Write
gboolean udp-reconnect Read / Write
gchar * proxy-id Read / Write
gchar * proxy-pw Read / Write
gchar * multicast-iface Read / Write
gboolean ntp-sync Read / Write
gboolean use-pipeline-clock Read / Write
GstStructure * sdes Read / Write
GTlsDatabase * tls-database Read / Write
GTlsCertificateFlags tls-validation-flags Read / Write
gboolean do-retransmission Read / Write
GTlsInteraction * tls-interaction Read / Write
GstRTSPSrcNtpTimeSource ntp-time-source Read / Write
gchar * user-agent Read / Write
gint max-rtcp-rtp-time-diff Read / Write
gboolean rfc7273-sync Read / Write
GstRTSPVersion default-rtsp-version Read / Write
gint64 max-ts-offset Read / Write
guint64 max-ts-offset-adjustment Read / Write
GstRTSPBackchannel backchannel Read / Write

Types and Values

struct GstRTSPSrc

Object Hierarchy

    GObject
    ╰── GInitiallyUnowned
        ╰── GstObject
            ╰── GstElement
                ╰── GstBin
                    ╰── GstRTSPSrc

Implemented Interfaces

GstRTSPSrc implements GstChildProxy and GstURIHandler.

Description

Makes a connection to an RTSP server and read the data. rtspsrc strictly follows RFC 2326 and therefore does not (yet) support RealMedia/Quicktime/Microsoft extensions.

RTSP supports transport over TCP or UDP in unicast or multicast mode. By default rtspsrc will negotiate a connection in the following order: UDP unicast/UDP multicast/TCP. The order cannot be changed but the allowed protocols can be controlled with the “protocols” property.

rtspsrc currently understands SDP as the format of the session description. For each stream listed in the SDP a new rtp_stream%d pad will be created with caps derived from the SDP media description. This is a caps of mime type "application/x-rtp" that can be connected to any available RTP depayloader element.

rtspsrc will internally instantiate an RTP session manager element that will handle the RTCP messages to and from the server, jitter removal, packet reordering along with providing a clock for the pipeline. This feature is implemented using the gstrtpbin element.

rtspsrc acts like a live source and will therefore only generate data in the PLAYING state.

Example launch line

1
gst-launch-1.0 rtspsrc location=rtsp://some.server/url ! fakesink
Establish a connection to an RTSP server and send the raw RTP packets to a fakesink.

Synopsis

Element Information

plugin

rtsp

author

Wim Taymans <wim@fluendo.com>, Thijs Vermeir <thijs.vermeir@barco.com>, Lutz Mueller <lutz@topfrose.de>

class

Source/Network

Element Pads

name

stream_%u

direction

source

presence

sometimes

details

application/x-rtp

application/x-rdt

Functions

Types and Values

struct GstRTSPSrc

struct GstRTSPSrc;

Property Details

The “debug” property

  “debug”                    gboolean

Dump request and response messages to stdout(DEPRECATED: Printed all RTSP message to gstreamer log as 'log' level).

Flags: Read / Write

Default value: FALSE


The “location” property

  “location”                 gchar *

Location of the RTSP url to read.

Flags: Read / Write

Default value: NULL


The “protocols” property

  “protocols”                GstRTSPLowerTrans

Allowed lower transport protocols.

Flags: Read / Write

Default value: GST_RTSP_LOWER_TRANS_UDP|GST_RTSP_LOWER_TRANS_UDP_MCAST|GST_RTSP_LOWER_TRANS_TCP


The “retry” property

  “retry”                    guint

Max number of retries when allocating RTP ports.

Flags: Read / Write

Allowed values: <= 65535

Default value: 20


The “timeout” property

  “timeout”                  guint64

Retry TCP transport after UDP timeout microseconds (0 = disabled).

Flags: Read / Write

Default value: 5000000


The “latency” property

  “latency”                  guint

Amount of ms to buffer.

Flags: Read / Write

Default value: 2000


The “tcp-timeout” property

  “tcp-timeout”              guint64

Fail after timeout microseconds on TCP connections (0 = disabled).

Flags: Read / Write

Default value: 20000000


The “connection-speed” property

  “connection-speed”         guint64

Network connection speed in kbps (0 = unknown).

Flags: Read / Write

Allowed values: <= 18446744073709551

Default value: 0


The “nat-method” property

  “nat-method”               GstRTSPNatMethod

Method to use for traversing firewalls and NAT.

Flags: Read / Write

Default value: Send Dummy packets


The “do-rtcp” property

  “do-rtcp”                  gboolean

Enable RTCP support. Some old server don't like RTCP and then this property needs to be set to FALSE.

Flags: Read / Write

Default value: TRUE


The “proxy” property

  “proxy”                    gchar *

Set the proxy parameters. This has to be a string of the format http://host[:port].

Flags: Read / Write

Default value: NULL


The “rtp-blocksize” property

  “rtp-blocksize”            guint

RTP package size to suggest to server.

Flags: Read / Write

Allowed values: <= 65536

Default value: 0


The “user-id” property

  “user-id”                  gchar *

RTSP location URI user id for authentication.

Flags: Read / Write

Default value: NULL


The “user-pw” property

  “user-pw”                  gchar *

RTSP location URI user password for authentication.

Flags: Read / Write

Default value: NULL


The “buffer-mode” property

  “buffer-mode”              GstRTSPSrcBufferMode

Control the buffering and timestamping mode used by the jitterbuffer.

Flags: Read / Write

Default value: Choose mode depending on stream live


The “port-range” property

  “port-range”               gchar *

Configure the client port numbers that can be used to recieve RTP and RTCP.

Flags: Read / Write

Default value: NULL


The “udp-buffer-size” property

  “udp-buffer-size”          gint

Size of the kernel UDP receive buffer in bytes.

Flags: Read / Write

Allowed values: >= 0

Default value: 524288


The “short-header” property

  “short-header”             gboolean

Only send the basic RTSP headers for broken encoders.

Flags: Read / Write

Default value: FALSE


The “do-rtsp-keep-alive” property

  “do-rtsp-keep-alive”       gboolean

Enable RTSP keep alive support. Some old server don't like RTSP keep alive and then this property needs to be set to FALSE.

Flags: Read / Write

Default value: TRUE


The “drop-on-latency” property

  “drop-on-latency”          gboolean

Tells the jitterbuffer to never exceed the given latency in size.

Flags: Read / Write

Default value: FALSE


The “probation” property

  “probation”                guint

Consecutive packet sequence numbers to accept the source.

Flags: Read / Write

Default value: 2


The “udp-reconnect” property

  “udp-reconnect”            gboolean

Reconnect to the server if RTSP connection is closed when doing UDP.

Flags: Read / Write

Default value: TRUE


The “proxy-id” property

  “proxy-id”                 gchar *

Sets the proxy URI user id for authentication. If the URI set via the "proxy" property contains a user-id already, that will take precedence.

Flags: Read / Write

Default value: ""

Since: 1.2


The “proxy-pw” property

  “proxy-pw”                 gchar *

Sets the proxy URI password for authentication. If the URI set via the "proxy" property contains a password already, that will take precedence.

Flags: Read / Write

Default value: ""

Since: 1.2


The “multicast-iface” property

  “multicast-iface”          gchar *

The network interface on which to join the multicast group.

Flags: Read / Write

Default value: NULL


The “ntp-sync” property

  “ntp-sync”                 gboolean

Synchronize received streams to the NTP clock.

Flags: Read / Write

Default value: FALSE


The “use-pipeline-clock” property

  “use-pipeline-clock”       gboolean

Use the pipeline running-time to set the NTP time in the RTCP SR messages(DEPRECATED: Use ntp-time-source property).

Flags: Read / Write

Default value: FALSE


The “sdes” property

  “sdes”                     GstStructure *

The SDES items of this session.

Flags: Read / Write


The “tls-database” property

  “tls-database”             GTlsDatabase *

TLS database with anchor certificate authorities used to validate the server certificate.

Flags: Read / Write


The “tls-validation-flags” property

  “tls-validation-flags”     GTlsCertificateFlags

TLS certificate validation flags used to validate the server certificate.

Flags: Read / Write

Default value: G_TLS_CERTIFICATE_UNKNOWN_CA|G_TLS_CERTIFICATE_BAD_IDENTITY|G_TLS_CERTIFICATE_NOT_ACTIVATED|G_TLS_CERTIFICATE_EXPIRED|G_TLS_CERTIFICATE_REVOKED|G_TLS_CERTIFICATE_INSECURE|G_TLS_CERTIFICATE_GENERIC_ERROR


The “do-retransmission” property

  “do-retransmission”        gboolean

Ask the server to retransmit lost packets.

Flags: Read / Write

Default value: TRUE


The “tls-interaction” property

  “tls-interaction”          GTlsInteraction *

A GTlsInteraction object to promt the user for password or certificate.

Flags: Read / Write


The “ntp-time-source” property

  “ntp-time-source”          GstRTSPSrcNtpTimeSource

NTP time source for RTCP packets.

Flags: Read / Write

Default value: NTP time based on realtime clock


The “user-agent” property

  “user-agent”               gchar *

The User-Agent string to send to the server.

Flags: Read / Write

Default value: "GStreamer/1.14.0"


The “max-rtcp-rtp-time-diff” property

  “max-rtcp-rtp-time-diff”   gint

Maximum amount of time in ms that the RTP time in RTCP SRs is allowed to be ahead (-1 disabled).

Flags: Read / Write

Allowed values: >= G_MAXULONG

Default value: 1000


The “rfc7273-sync” property

  “rfc7273-sync”             gboolean

Synchronize received streams to the RFC7273 clock (requires clock and offset to be provided).

Flags: Read / Write

Default value: FALSE


The “default-rtsp-version” property

  “default-rtsp-version”     GstRTSPVersion

The preferred RTSP version to use while negotiating the version with the server.

Flags: Read / Write

Default value: GST_RTSP_VERSION_1_0

Since: 1.14


The “max-ts-offset” property

  “max-ts-offset”            gint64

The maximum absolute value of the time offset in (nanoseconds). Note, if the ntp-sync parameter is set the default value is changed to 0 (no limit).

Flags: Read / Write

Allowed values: >= 0

Default value: 3000000000


The “max-ts-offset-adjustment” property

  “max-ts-offset-adjustment” guint64

Syncing time stamps to NTP time adds a time offset. This parameter specifies the maximum number of nanoseconds per frame that this time offset may be adjusted with. This is used to avoid sudden large changes to time stamps.

Flags: Read / Write

Default value: 0


The “backchannel” property

  “backchannel”              GstRTSPBackchannel

The type of backchannel to setup. Default is 'none'.

Flags: Read / Write

Default value: No backchannel

Signal Details

The “handle-request” signal

void
user_function (GstRTSPSrc *rtspsrc,
               gpointer    request,
               gpointer    response,
               gpointer    user_data)

Handle a server request in request and prepare response .

This signal is called from the streaming thread, you should therefore not do any state changes on rtspsrc because this might deadlock. If you want to modify the state as a result of this signal, post a GST_MESSAGE_REQUEST_STATE message on the bus or signal the main thread in some other way.

Parameters

rtspsrc

a GstRTSPSrc

 

request

a GstRTSPMessage

 

response

a GstRTSPMessage

 

user_data

user data set when the signal handler was connected.

 

Since: 1.2


The “on-sdp” signal

void
user_function (GstRTSPSrc    *rtspsrc,
               GstSDPMessage *sdp,
               gpointer       user_data)

Emited when the client has retrieved the SDP and before it configures the streams in the SDP. sdp can be inspected and modified.

This signal is called from the streaming thread, you should therefore not do any state changes on rtspsrc because this might deadlock. If you want to modify the state as a result of this signal, post a GST_MESSAGE_REQUEST_STATE message on the bus or signal the main thread in some other way.

Parameters

rtspsrc

a GstRTSPSrc

 

sdp

a GstSDPMessage

 

user_data

user data set when the signal handler was connected.

 

Since: 1.2


The “select-stream” signal

gboolean
user_function (GstRTSPSrc *rtspsrc,
               guint       num,
               GstCaps    *caps,
               gpointer    user_data)

Emited before the client decides to configure the stream num with caps .

Parameters

rtspsrc

a GstRTSPSrc

 

num

the stream number

 

caps

the stream caps

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE when the stream should be selected, FALSE when the stream is to be ignored.

Flags: Run First

Since: 1.2


The “new-manager” signal

void
user_function (GstRTSPSrc *rtspsrc,
               GstElement *manager,
               gpointer    user_data)

Emited after a new manager (like rtpbin) was created and the default properties were configured.

Parameters

rtspsrc

a GstRTSPSrc

 

manager

a GstElement

 

user_data

user data set when the signal handler was connected.

 

Flags: Run First

Since: 1.4


The “request-rtcp-key” signal

GstCaps*
user_function (GstRTSPSrc *rtspsrc,
               guint       num,
               gpointer    user_data)

Signal emited to get the crypto parameters relevant to the RTCP stream. User should provide the key and the RTCP encryption ciphers and authentication, and return them wrapped in a GstCaps.

Parameters

rtspsrc

a GstRTSPSrc

 

num

the stream number

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since: 1.4


The “accept-certificate” signal

gboolean
user_function (GstRTSPSrc          *rtspsrc,
               GTlsConnection      *peer_cert,
               GTlsCertificate     *errors,
               GTlsCertificateFlags user_data,
               gpointer             user_data)

This will directly map to GTlsConnection 's "accept-certificate" signal and be performed after the default checks of GstRTSPConnection (checking against the GTlsDatabase with the given GTlsCertificateFlags) have failed. If no GTlsDatabase is set on this connection, only this signal will be emitted.

Parameters

rtspsrc

a GstRTSPSrc

 

peer_cert

the peer's GTlsCertificate

 

errors

the problems with peer_cert

 

user_data

user data set when the signal handler was connected.

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since: 1.14


The “before-send” signal

gboolean
user_function (GstRTSPSrc     *gstrtspsrc,
               GstRTSPMessage *arg1,
               gpointer        user_data)

Flags: Run First


The “push-backchannel-buffer” signal

GstFlowReturn
user_function (GstRTSPSrc *rtspsrc,
               guint       buffer,
               GstBuffer  *arg2,
               gpointer    user_data)

Parameters

rtspsrc

a GstRTSPSrc

 

buffer

RTP buffer to send back

 

user_data

user data set when the signal handler was connected.

 

Flags: Action

© manpagez.com 2000-2024
Individual documents may contain additional copyright information.