manpagez: man pages & more
html files: gtk3
Home | html | info | man

GtkPrintOperation

GtkPrintOperation — High-level Printing API

Functions

GtkPrintOperation * gtk_print_operation_new ()
void gtk_print_operation_set_allow_async ()
void gtk_print_operation_get_error ()
void gtk_print_operation_set_default_page_setup ()
GtkPageSetup * gtk_print_operation_get_default_page_setup ()
void gtk_print_operation_set_print_settings ()
GtkPrintSettings * gtk_print_operation_get_print_settings ()
void gtk_print_operation_set_job_name ()
void gtk_print_operation_set_n_pages ()
gint gtk_print_operation_get_n_pages_to_print ()
void gtk_print_operation_set_current_page ()
void gtk_print_operation_set_use_full_page ()
void gtk_print_operation_set_unit ()
void gtk_print_operation_set_export_filename ()
void gtk_print_operation_set_show_progress ()
void gtk_print_operation_set_track_print_status ()
void gtk_print_operation_set_custom_tab_label ()
GtkPrintOperationResult gtk_print_operation_run ()
void gtk_print_operation_cancel ()
void gtk_print_operation_draw_page_finish ()
void gtk_print_operation_set_defer_drawing ()
GtkPrintStatus gtk_print_operation_get_status ()
const gchar * gtk_print_operation_get_status_string ()
gboolean gtk_print_operation_is_finished ()
void gtk_print_operation_set_support_selection ()
gboolean gtk_print_operation_get_support_selection ()
void gtk_print_operation_set_has_selection ()
gboolean gtk_print_operation_get_has_selection ()
void gtk_print_operation_set_embed_page_setup ()
gboolean gtk_print_operation_get_embed_page_setup ()
GtkPageSetup * gtk_print_run_page_setup_dialog ()
void (*GtkPageSetupDoneFunc) ()
void gtk_print_run_page_setup_dialog_async ()
void gtk_print_operation_preview_end_preview ()
gboolean gtk_print_operation_preview_is_selected ()
void gtk_print_operation_preview_render_page ()

Properties

gboolean allow-async Read / Write
gint current-page Read / Write
gchar * custom-tab-label Read / Write
GtkPageSetup * default-page-setup Read / Write
gboolean embed-page-setup Read / Write
gchar * export-filename Read / Write
gboolean has-selection Read / Write
gchar * job-name Read / Write
gint n-pages Read / Write
gint n-pages-to-print Read
GtkPrintSettings * print-settings Read / Write
gboolean show-progress Read / Write
GtkPrintStatus status Read
gchar * status-string Read
gboolean support-selection Read / Write
gboolean track-print-status Read / Write
GtkUnit unit Read / Write
gboolean use-full-page Read / Write

Signals

void begin-print Run Last
GObject* create-custom-widget Run Last
void custom-widget-apply Run Last
void done Run Last
void draw-page Run Last
void end-print Run Last
gboolean paginate Run Last
gboolean preview Run Last
void request-page-setup Run Last
void status-changed Run Last
void update-custom-widget Run Last
void got-page-size Run Last
void ready Run Last

Object Hierarchy

    GInterface
    ╰── GtkPrintOperationPreview
    GObject
    ╰── GtkPrintOperation

Prerequisites

GtkPrintOperationPreview requires GObject.

Implemented Interfaces

GtkPrintOperation implements GtkPrintOperationPreview.

Known Implementations

GtkPrintOperationPreview is implemented by GtkPrintOperation.

Includes

#include <gtk/gtk.h>

Description

GtkPrintOperation is the high-level, portable printing API. It looks a bit different than other GTK+ dialogs such as the GtkFileChooser, since some platforms don’t expose enough infrastructure to implement a good print dialog. On such platforms, GtkPrintOperation uses the native print dialog. On platforms which do not provide a native print dialog, GTK+ uses its own, see GtkPrintUnixDialog.

The typical way to use the high-level printing API is to create a GtkPrintOperation object with gtk_print_operation_new() when the user selects to print. Then you set some properties on it, e.g. the page size, any GtkPrintSettings from previous print operations, the number of pages, the current page, etc.

Then you start the print operation by calling gtk_print_operation_run(). It will then show a dialog, let the user select a printer and options. When the user finished the dialog various signals will be emitted on the GtkPrintOperation, the main one being “draw-page”, which you are supposed to catch and render the page on the provided GtkPrintContext using Cairo.

The high-level printing API

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
static GtkPrintSettings *settings = NULL;

static void
do_print (void)
{
  GtkPrintOperation *print;
  GtkPrintOperationResult res;

  print = gtk_print_operation_new ();

  if (settings != NULL)
    gtk_print_operation_set_print_settings (print, settings);

  g_signal_connect (print, "begin_print", G_CALLBACK (begin_print), NULL);
  g_signal_connect (print, "draw_page", G_CALLBACK (draw_page), NULL);

  res = gtk_print_operation_run (print, GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG,
                                 GTK_WINDOW (main_window), NULL);

  if (res == GTK_PRINT_OPERATION_RESULT_APPLY)
    {
      if (settings != NULL)
        g_object_unref (settings);
      settings = g_object_ref (gtk_print_operation_get_print_settings (print));
    }

  g_object_unref (print);
}

By default GtkPrintOperation uses an external application to do print preview. To implement a custom print preview, an application must connect to the preview signal. The functions gtk_print_operation_preview_render_page(), gtk_print_operation_preview_end_preview() and gtk_print_operation_preview_is_selected() are useful when implementing a print preview.

Functions

gtk_print_operation_new ()

GtkPrintOperation *
gtk_print_operation_new (void);

Creates a new GtkPrintOperation.

Returns

a new GtkPrintOperation

Since 2.10


gtk_print_operation_set_allow_async ()

void
gtk_print_operation_set_allow_async (GtkPrintOperation *op,
                                     gboolean allow_async);

Sets whether the gtk_print_operation_run() may return before the print operation is completed. Note that some platforms may not allow asynchronous operation.

Parameters

op

a GtkPrintOperation

 

allow_async

TRUE to allow asynchronous operation

 

Since 2.10


gtk_print_operation_get_error ()

void
gtk_print_operation_get_error (GtkPrintOperation *op,
                               GError **error);

Call this when the result of a print operation is GTK_PRINT_OPERATION_RESULT_ERROR, either as returned by gtk_print_operation_run(), or in the “done” signal handler. The returned GError will contain more details on what went wrong.

Parameters

op

a GtkPrintOperation

 

error

return location for the error

 

Since 2.10


gtk_print_operation_set_default_page_setup ()

void
gtk_print_operation_set_default_page_setup
                               (GtkPrintOperation *op,
                                GtkPageSetup *default_page_setup);

Makes default_page_setup the default page setup for op .

This page setup will be used by gtk_print_operation_run(), but it can be overridden on a per-page basis by connecting to the “request-page-setup” signal.

Parameters

op

a GtkPrintOperation

 

default_page_setup

a GtkPageSetup, or NULL.

[allow-none]

Since 2.10


gtk_print_operation_get_default_page_setup ()

GtkPageSetup *
gtk_print_operation_get_default_page_setup
                               (GtkPrintOperation *op);

Returns the default page setup, see gtk_print_operation_set_default_page_setup().

Parameters

Returns

the default page setup.

[transfer none]

Since 2.10


gtk_print_operation_set_print_settings ()

void
gtk_print_operation_set_print_settings
                               (GtkPrintOperation *op,
                                GtkPrintSettings *print_settings);

Sets the print settings for op . This is typically used to re-establish print settings from a previous print operation, see gtk_print_operation_run().

Parameters

op

a GtkPrintOperation

 

print_settings

GtkPrintSettings.

[allow-none]

Since 2.10


gtk_print_operation_get_print_settings ()

GtkPrintSettings *
gtk_print_operation_get_print_settings
                               (GtkPrintOperation *op);

Returns the current print settings.

Note that the return value is NULL until either gtk_print_operation_set_print_settings() or gtk_print_operation_run() have been called.

Parameters

Returns

the current print settings of op .

[transfer none]

Since 2.10


gtk_print_operation_set_job_name ()

void
gtk_print_operation_set_job_name (GtkPrintOperation *op,
                                  const gchar *job_name);

Sets the name of the print job. The name is used to identify the job (e.g. in monitoring applications like eggcups).

If you don’t set a job name, GTK+ picks a default one by numbering successive print jobs.

Parameters

op

a GtkPrintOperation

 

job_name

a string that identifies the print job

 

Since 2.10


gtk_print_operation_set_n_pages ()

void
gtk_print_operation_set_n_pages (GtkPrintOperation *op,
                                 gint n_pages);

Sets the number of pages in the document.

This must be set to a positive number before the rendering starts. It may be set in a “begin-print” signal hander.

Note that the page numbers passed to the “request-page-setup” and “draw-page” signals are 0-based, i.e. if the user chooses to print all pages, the last ::draw-page signal will be for page n_pages - 1.

Parameters

op

a GtkPrintOperation

 

n_pages

the number of pages

 

Since 2.10


gtk_print_operation_get_n_pages_to_print ()

gint
gtk_print_operation_get_n_pages_to_print
                               (GtkPrintOperation *op);

Returns the number of pages that will be printed.

Note that this value is set during print preparation phase (GTK_PRINT_STATUS_PREPARING), so this function should never be called before the data generation phase (GTK_PRINT_STATUS_GENERATING_DATA). You can connect to the “status-changed” signal and call gtk_print_operation_get_n_pages_to_print() when print status is GTK_PRINT_STATUS_GENERATING_DATA. This is typically used to track the progress of print operation.

Parameters

Returns

the number of pages that will be printed

Since 2.18


gtk_print_operation_set_current_page ()

void
gtk_print_operation_set_current_page (GtkPrintOperation *op,
                                      gint current_page);

Sets the current page.

If this is called before gtk_print_operation_run(), the user will be able to select to print only the current page.

Note that this only makes sense for pre-paginated documents.

Parameters

op

a GtkPrintOperation

 

current_page

the current page, 0-based

 

Since 2.10


gtk_print_operation_set_use_full_page ()

void
gtk_print_operation_set_use_full_page (GtkPrintOperation *op,
                                       gboolean full_page);

If full_page is TRUE, the transformation for the cairo context obtained from GtkPrintContext puts the origin at the top left corner of the page (which may not be the top left corner of the sheet, depending on page orientation and the number of pages per sheet). Otherwise, the origin is at the top left corner of the imageable area (i.e. inside the margins).

Parameters

op

a GtkPrintOperation

 

full_page

TRUE to set up the GtkPrintContext for the full page

 

Since 2.10


gtk_print_operation_set_unit ()

void
gtk_print_operation_set_unit (GtkPrintOperation *op,
                              GtkUnit unit);

Sets up the transformation for the cairo context obtained from GtkPrintContext in such a way that distances are measured in units of unit .

Parameters

op

a GtkPrintOperation

 

unit

the unit to use

 

Since 2.10


gtk_print_operation_set_export_filename ()

void
gtk_print_operation_set_export_filename
                               (GtkPrintOperation *op,
                                const gchar *filename);

Sets up the GtkPrintOperation to generate a file instead of showing the print dialog. The indended use of this function is for implementing “Export to PDF” actions. Currently, PDF is the only supported format.

“Print to PDF” support is independent of this and is done by letting the user pick the “Print to PDF” item from the list of printers in the print dialog.

Parameters

op

a GtkPrintOperation

 

filename

the filename for the exported file.

[type filename]

Since 2.10


gtk_print_operation_set_show_progress ()

void
gtk_print_operation_set_show_progress (GtkPrintOperation *op,
                                       gboolean show_progress);

If show_progress is TRUE, the print operation will show a progress dialog during the print operation.

Parameters

op

a GtkPrintOperation

 

show_progress

TRUE to show a progress dialog

 

Since 2.10


gtk_print_operation_set_track_print_status ()

void
gtk_print_operation_set_track_print_status
                               (GtkPrintOperation *op,
                                gboolean track_status);

If track_status is TRUE, the print operation will try to continue report on the status of the print job in the printer queues and printer. This can allow your application to show things like “out of paper” issues, and when the print job actually reaches the printer.

This function is often implemented using some form of polling, so it should not be enabled unless needed.

Parameters

op

a GtkPrintOperation

 

track_status

TRUE to track status after printing

 

Since 2.10


gtk_print_operation_set_custom_tab_label ()

void
gtk_print_operation_set_custom_tab_label
                               (GtkPrintOperation *op,
                                const gchar *label);

Sets the label for the tab holding custom widgets.

Parameters

op

a GtkPrintOperation

 

label

the label to use, or NULL to use the default label.

[allow-none]

Since 2.10


gtk_print_operation_run ()

GtkPrintOperationResult
gtk_print_operation_run (GtkPrintOperation *op,
                         GtkPrintOperationAction action,
                         GtkWindow *parent,
                         GError **error);

Runs the print operation, by first letting the user modify print settings in the print dialog, and then print the document.

Normally that this function does not return until the rendering of all pages is complete. You can connect to the “status-changed” signal on op to obtain some information about the progress of the print operation. Furthermore, it may use a recursive mainloop to show the print dialog.

If you call gtk_print_operation_set_allow_async() or set the “allow-async” property the operation will run asynchronously if this is supported on the platform. The “done” signal will be emitted with the result of the operation when the it is done (i.e. when the dialog is canceled, or when the print succeeds or fails).

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
if (settings != NULL)
  gtk_print_operation_set_print_settings (print, settings);
  
if (page_setup != NULL)
  gtk_print_operation_set_default_page_setup (print, page_setup);
  
g_signal_connect (print, "begin-print", 
                  G_CALLBACK (begin_print), &data);
g_signal_connect (print, "draw-page", 
                  G_CALLBACK (draw_page), &data);
 
res = gtk_print_operation_run (print, 
                               GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, 
                               parent, 
                               &error);
 
if (res == GTK_PRINT_OPERATION_RESULT_ERROR)
 {
   error_dialog = gtk_message_dialog_new (GTK_WINDOW (parent),
                                 GTK_DIALOG_DESTROY_WITH_PARENT,
                         GTK_MESSAGE_ERROR,
                         GTK_BUTTONS_CLOSE,
                         "Error printing file:\n%s",
                         error->message);
   g_signal_connect (error_dialog, "response", 
                     G_CALLBACK (gtk_widget_destroy), NULL);
   gtk_widget_show (error_dialog);
   g_error_free (error);
 }
else if (res == GTK_PRINT_OPERATION_RESULT_APPLY)
 {
   if (settings != NULL)
g_object_unref (settings);
   settings = g_object_ref (gtk_print_operation_get_print_settings (print));
 }

Note that gtk_print_operation_run() can only be called once on a given GtkPrintOperation.

Parameters

op

a GtkPrintOperation

 

action

the action to start

 

parent

Transient parent of the dialog.

[allow-none]

error

Return location for errors, or NULL.

[allow-none]

Returns

the result of the print operation. A return value of GTK_PRINT_OPERATION_RESULT_APPLY indicates that the printing was completed successfully. In this case, it is a good idea to obtain the used print settings with gtk_print_operation_get_print_settings() and store them for reuse with the next print operation. A value of GTK_PRINT_OPERATION_RESULT_IN_PROGRESS means the operation is running asynchronously, and will emit the “done” signal when done.

Since 2.10


gtk_print_operation_cancel ()

void
gtk_print_operation_cancel (GtkPrintOperation *op);

Cancels a running print operation. This function may be called from a “begin-print”, “paginate” or “draw-page” signal handler to stop the currently running print operation.

Parameters

Since 2.10


gtk_print_operation_draw_page_finish ()

void
gtk_print_operation_draw_page_finish (GtkPrintOperation *op);

Signalize that drawing of particular page is complete.

It is called after completion of page drawing (e.g. drawing in another thread). If gtk_print_operation_set_defer_drawing() was called before, then this function has to be called by application. In another case it is called by the library itself.

Parameters

Since 2.16


gtk_print_operation_set_defer_drawing ()

void
gtk_print_operation_set_defer_drawing (GtkPrintOperation *op);

Sets up the GtkPrintOperation to wait for calling of gtk_print_operation_draw_page_finish() from application. It can be used for drawing page in another thread.

This function must be called in the callback of “draw-page” signal.

Parameters

Since 2.16


gtk_print_operation_get_status ()

GtkPrintStatus
gtk_print_operation_get_status (GtkPrintOperation *op);

Returns the status of the print operation. Also see gtk_print_operation_get_status_string().

Parameters

Returns

the status of the print operation

Since 2.10


gtk_print_operation_get_status_string ()

const gchar *
gtk_print_operation_get_status_string (GtkPrintOperation *op);

Returns a string representation of the status of the print operation. The string is translated and suitable for displaying the print status e.g. in a GtkStatusbar.

Use gtk_print_operation_get_status() to obtain a status value that is suitable for programmatic use.

Parameters

Returns

a string representation of the status of the print operation

Since 2.10


gtk_print_operation_is_finished ()

gboolean
gtk_print_operation_is_finished (GtkPrintOperation *op);

A convenience function to find out if the print operation is finished, either successfully (GTK_PRINT_STATUS_FINISHED) or unsuccessfully (GTK_PRINT_STATUS_FINISHED_ABORTED).

Note: when you enable print status tracking the print operation can be in a non-finished state even after done has been called, as the operation status then tracks the print job status on the printer.

Parameters

Returns

TRUE, if the print operation is finished.

Since 2.10


gtk_print_operation_set_support_selection ()

void
gtk_print_operation_set_support_selection
                               (GtkPrintOperation *op,
                                gboolean support_selection);

Sets whether selection is supported by GtkPrintOperation.

Parameters

op

a GtkPrintOperation

 

support_selection

TRUE to support selection

 

Since 2.18


gtk_print_operation_get_support_selection ()

gboolean
gtk_print_operation_get_support_selection
                               (GtkPrintOperation *op);

Gets the value of “support-selection” property.

Parameters

Returns

whether the application supports print of selection

Since 2.18


gtk_print_operation_set_has_selection ()

void
gtk_print_operation_set_has_selection (GtkPrintOperation *op,
                                       gboolean has_selection);

Sets whether there is a selection to print.

Application has to set number of pages to which the selection will draw by gtk_print_operation_set_n_pages() in a callback of “begin-print”.

Parameters

op

a GtkPrintOperation

 

has_selection

TRUE indicates that a selection exists

 

Since 2.18


gtk_print_operation_get_has_selection ()

gboolean
gtk_print_operation_get_has_selection (GtkPrintOperation *op);

Gets the value of “has-selection” property.

Parameters

Returns

whether there is a selection

Since 2.18


gtk_print_operation_set_embed_page_setup ()

void
gtk_print_operation_set_embed_page_setup
                               (GtkPrintOperation *op,
                                gboolean embed);

Embed page size combo box and orientation combo box into page setup page. Selected page setup is stored as default page setup in GtkPrintOperation.

Parameters

op

a GtkPrintOperation

 

embed

TRUE to embed page setup selection in the GtkPrintUnixDialog

 

Since 2.18


gtk_print_operation_get_embed_page_setup ()

gboolean
gtk_print_operation_get_embed_page_setup
                               (GtkPrintOperation *op);

Gets the value of “embed-page-setup” property.

Parameters

Returns

whether page setup selection combos are embedded

Since 2.18


gtk_print_run_page_setup_dialog ()

GtkPageSetup *
gtk_print_run_page_setup_dialog (GtkWindow *parent,
                                 GtkPageSetup *page_setup,
                                 GtkPrintSettings *settings);

Runs a page setup dialog, letting the user modify the values from page_setup . If the user cancels the dialog, the returned GtkPageSetup is identical to the passed in page_setup , otherwise it contains the modifications done in the dialog.

Note that this function may use a recursive mainloop to show the page setup dialog. See gtk_print_run_page_setup_dialog_async() if this is a problem.

Parameters

parent

transient parent.

[allow-none]

page_setup

an existing GtkPageSetup.

[allow-none]

settings

a GtkPrintSettings

 

Returns

a new GtkPageSetup.

[transfer full]

Since 2.10


GtkPageSetupDoneFunc ()

void
(*GtkPageSetupDoneFunc) (GtkPageSetup *page_setup,
                         gpointer data);

The type of function that is passed to gtk_print_run_page_setup_dialog_async().

This function will be called when the page setup dialog is dismissed, and also serves as destroy notify for data .

Parameters

page_setup

the GtkPageSetup that has been

 

data

user data that has been passed to gtk_print_run_page_setup_dialog_async().

[closure]

gtk_print_run_page_setup_dialog_async ()

void
gtk_print_run_page_setup_dialog_async (GtkWindow *parent,
                                       GtkPageSetup *page_setup,
                                       GtkPrintSettings *settings,
                                       GtkPageSetupDoneFunc done_cb,
                                       gpointer data);

Runs a page setup dialog, letting the user modify the values from page_setup .

In contrast to gtk_print_run_page_setup_dialog(), this function returns after showing the page setup dialog on platforms that support this, and calls done_cb from a signal handler for the ::response signal of the dialog.

Parameters

parent

transient parent, or NULL.

[allow-none]

page_setup

an existing GtkPageSetup, or NULL.

[allow-none]

settings

a GtkPrintSettings

 

done_cb

a function to call when the user saves the modified page setup.

[scope async]

data

user data to pass to done_cb

 

Since 2.10


gtk_print_operation_preview_end_preview ()

void
gtk_print_operation_preview_end_preview
                               (GtkPrintOperationPreview *preview);

Ends a preview.

This function must be called to finish a custom print preview.

Parameters

Since 2.10


gtk_print_operation_preview_is_selected ()

gboolean
gtk_print_operation_preview_is_selected
                               (GtkPrintOperationPreview *preview,
                                gint page_nr);

Returns whether the given page is included in the set of pages that have been selected for printing.

Parameters

preview

a GtkPrintOperationPreview

 

page_nr

a page number

 

Returns

TRUE if the page has been selected for printing

Since 2.10


gtk_print_operation_preview_render_page ()

void
gtk_print_operation_preview_render_page
                               (GtkPrintOperationPreview *preview,
                                gint page_nr);

Renders a page to the preview, using the print context that was passed to the “preview” handler together with preview .

A custom iprint preview should use this function in its ::expose handler to render the currently selected page.

Note that this function requires a suitable cairo context to be associated with the print context.

Parameters

preview

a GtkPrintOperationPreview

 

page_nr

the page to render

 

Since 2.10

Types and Values

struct GtkPrintOperation

struct GtkPrintOperation;

struct GtkPrintOperationClass

struct GtkPrintOperationClass {
  GObjectClass parent_class;


  void     (*done)               (GtkPrintOperation *operation,
                                  GtkPrintOperationResult result);
  void     (*begin_print)        (GtkPrintOperation *operation,
                                  GtkPrintContext   *context);
  gboolean (*paginate)           (GtkPrintOperation *operation,
                                  GtkPrintContext   *context);
  void     (*request_page_setup) (GtkPrintOperation *operation,
                                  GtkPrintContext   *context,
                                  gint               page_nr,
                                  GtkPageSetup      *setup);
  void     (*draw_page)          (GtkPrintOperation *operation,
                                  GtkPrintContext   *context,
                                  gint               page_nr);
  void     (*end_print)          (GtkPrintOperation *operation,
                                  GtkPrintContext   *context);
  void     (*status_changed)     (GtkPrintOperation *operation);

  GtkWidget *(*create_custom_widget) (GtkPrintOperation *operation);
  void       (*custom_widget_apply)  (GtkPrintOperation *operation,
                                      GtkWidget         *widget);

  gboolean (*preview)        (GtkPrintOperation        *operation,
                              GtkPrintOperationPreview *preview,
                              GtkPrintContext          *context,
                              GtkWindow                *parent);

  void     (*update_custom_widget) (GtkPrintOperation *operation,
                                    GtkWidget         *widget,
                                    GtkPageSetup      *setup,
                                    GtkPrintSettings  *settings);
};

Members

GObjectClass parent_class;

The parent class.

 

done ()

Signal emitted when the print operation run has finished doing everything required for printing.

 

begin_print ()

Signal emitted after the user has finished changing print settings in the dialog, before the actual rendering starts.

 

paginate ()

Signal emitted after the “begin-print” signal, but before the actual rendering starts.

 

request_page_setup ()

Emitted once for every page that is printed, to give the application a chance to modify the page setup.

 

draw_page ()

Signal emitted for every page that is printed.

 

end_print ()

Signal emitted after all pages have been rendered.

 

status_changed ()

Emitted at between the various phases of the print operation.

 

create_custom_widget ()

Signal emitted when displaying the print dialog.

 

custom_widget_apply ()

Signal emitted right before “begin-print” if you added a custom widget in the “create-custom-widget” handler.

 

preview ()

Signal emitted when a preview is requested from the native dialog.

 

update_custom_widget ()

Emitted after change of selected printer.

 

enum GtkPrintStatus

The status gives a rough indication of the completion of a running print operation.

Members

GTK_PRINT_STATUS_INITIAL

The printing has not started yet; this status is set initially, and while the print dialog is shown.

 

GTK_PRINT_STATUS_PREPARING

This status is set while the begin-print signal is emitted and during pagination.

 

GTK_PRINT_STATUS_GENERATING_DATA

This status is set while the pages are being rendered.

 

GTK_PRINT_STATUS_SENDING_DATA

The print job is being sent off to the printer.

 

GTK_PRINT_STATUS_PENDING

The print job has been sent to the printer, but is not printed for some reason, e.g. the printer may be stopped.

 

GTK_PRINT_STATUS_PENDING_ISSUE

Some problem has occurred during printing, e.g. a paper jam.

 

GTK_PRINT_STATUS_PRINTING

The printer is processing the print job.

 

GTK_PRINT_STATUS_FINISHED

The printing has been completed successfully.

 

GTK_PRINT_STATUS_FINISHED_ABORTED

The printing has been aborted.

 

enum GtkPrintOperationAction

The action parameter to gtk_print_operation_run() determines what action the print operation should perform.

Members

GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG

Show the print dialog.

 

GTK_PRINT_OPERATION_ACTION_PRINT

Start to print without showing the print dialog, based on the current print settings.

 

GTK_PRINT_OPERATION_ACTION_PREVIEW

Show the print preview.

 

GTK_PRINT_OPERATION_ACTION_EXPORT

Export to a file. This requires the export-filename property to be set.

 

enum GtkPrintOperationResult

A value of this type is returned by gtk_print_operation_run().

Members

GTK_PRINT_OPERATION_RESULT_ERROR

An error has occured.

 

GTK_PRINT_OPERATION_RESULT_APPLY

The print settings should be stored.

 

GTK_PRINT_OPERATION_RESULT_CANCEL

The print operation has been canceled, the print settings should not be stored.

 

GTK_PRINT_OPERATION_RESULT_IN_PROGRESS

The print operation is not complete yet. This value will only be returned when running asynchronously.

 

enum GtkPrintError

Error codes that identify various errors that can occur while using the GTK+ printing support.

Members

GTK_PRINT_ERROR_GENERAL

An unspecified error occurred.

 

GTK_PRINT_ERROR_INTERNAL_ERROR

An internal error occurred.

 

GTK_PRINT_ERROR_NOMEM

A memory allocation failed.

 

GTK_PRINT_ERROR_INVALID_FILE

An error occurred while loading a page setup or paper size from a key file.

 

GTK_PRINT_ERROR

#define GTK_PRINT_ERROR gtk_print_error_quark ()

The error domain for GtkPrintError errors.


GtkPrintOperationPreview

typedef struct _GtkPrintOperationPreview GtkPrintOperationPreview;

Property Details

The “allow-async” property

  “allow-async”              gboolean

Determines whether the print operation may run asynchronously or not.

Some systems don't support asynchronous printing, but those that do will return GTK_PRINT_OPERATION_RESULT_IN_PROGRESS as the status, and emit the “done” signal when the operation is actually done.

The Windows port does not support asynchronous operation at all (this is unlikely to change). On other platforms, all actions except for GTK_PRINT_OPERATION_ACTION_EXPORT support asynchronous operation.

Flags: Read / Write

Default value: FALSE

Since 2.10


The “current-page” property

  “current-page”             gint

The current page in the document.

If this is set before gtk_print_operation_run(), the user will be able to select to print only the current page.

Note that this only makes sense for pre-paginated documents.

Flags: Read / Write

Allowed values: >= -1

Default value: -1

Since 2.10


The “custom-tab-label” property

  “custom-tab-label”         gchar *

Used as the label of the tab containing custom widgets. Note that this property may be ignored on some platforms.

If this is NULL, GTK+ uses a default label.

Flags: Read / Write

Default value: NULL

Since 2.10


The “default-page-setup” property

  “default-page-setup”       GtkPageSetup *

The GtkPageSetup used by default.

This page setup will be used by gtk_print_operation_run(), but it can be overridden on a per-page basis by connecting to the “request-page-setup” signal.

Flags: Read / Write

Since 2.10


The “embed-page-setup” property

  “embed-page-setup”         gboolean

If TRUE, page size combo box and orientation combo box are embedded into page setup page.

Flags: Read / Write

Default value: FALSE

Since 2.18


The “export-filename” property

  “export-filename”          gchar *

The name of a file to generate instead of showing the print dialog. Currently, PDF is the only supported format.

The intended use of this property is for implementing “Export to PDF” actions.

“Print to PDF” support is independent of this and is done by letting the user pick the “Print to PDF” item from the list of printers in the print dialog.

Flags: Read / Write

Default value: NULL

Since 2.10


The “has-selection” property

  “has-selection”            gboolean

Determines whether there is a selection in your application. This can allow your application to print the selection. This is typically used to make a "Selection" button sensitive.

Flags: Read / Write

Default value: FALSE

Since 2.18


The “job-name” property

  “job-name”                 gchar *

A string used to identify the job (e.g. in monitoring applications like eggcups).

If you don't set a job name, GTK+ picks a default one by numbering successive print jobs.

Flags: Read / Write

Default value: ""

Since 2.10


The “n-pages” property

  “n-pages”                  gint

The number of pages in the document.

This must be set to a positive number before the rendering starts. It may be set in a “begin-print” signal hander.

Note that the page numbers passed to the “request-page-setup” and “draw-page” signals are 0-based, i.e. if the user chooses to print all pages, the last ::draw-page signal will be for page n_pages - 1.

Flags: Read / Write

Allowed values: >= -1

Default value: -1

Since 2.10


The “n-pages-to-print” property

  “n-pages-to-print”         gint

The number of pages that will be printed.

Note that this value is set during print preparation phase (GTK_PRINT_STATUS_PREPARING), so this value should never be get before the data generation phase (GTK_PRINT_STATUS_GENERATING_DATA). You can connect to the “status-changed” signal and call gtk_print_operation_get_n_pages_to_print() when print status is GTK_PRINT_STATUS_GENERATING_DATA. This is typically used to track the progress of print operation.

Flags: Read

Allowed values: >= -1

Default value: -1

Since 2.18


The “print-settings” property

  “print-settings”           GtkPrintSettings *

The GtkPrintSettings used for initializing the dialog.

Setting this property is typically used to re-establish print settings from a previous print operation, see gtk_print_operation_run().

Flags: Read / Write

Since 2.10


The “show-progress” property

  “show-progress”            gboolean

Determines whether to show a progress dialog during the print operation.

Flags: Read / Write

Default value: FALSE

Since 2.10


The “status” property

  “status”                   GtkPrintStatus

The status of the print operation.

Flags: Read

Default value: GTK_PRINT_STATUS_INITIAL

Since 2.10


The “status-string” property

  “status-string”            gchar *

A string representation of the status of the print operation. The string is translated and suitable for displaying the print status e.g. in a GtkStatusbar.

See the “status” property for a status value that is suitable for programmatic use.

Flags: Read

Default value: ""

Since 2.10


The “support-selection” property

  “support-selection”        gboolean

If TRUE, the print operation will support print of selection. This allows the print dialog to show a "Selection" button.

Flags: Read / Write

Default value: FALSE

Since 2.18


The “track-print-status” property

  “track-print-status”       gboolean

If TRUE, the print operation will try to continue report on the status of the print job in the printer queues and printer. This can allow your application to show things like “out of paper” issues, and when the print job actually reaches the printer. However, this is often implemented using polling, and should not be enabled unless needed.

Flags: Read / Write

Default value: FALSE

Since 2.10


The “unit” property

  “unit”                     GtkUnit

The transformation for the cairo context obtained from GtkPrintContext is set up in such a way that distances are measured in units of unit .

Flags: Read / Write

Default value: GTK_UNIT_NONE

Since 2.10


The “use-full-page” property

  “use-full-page”            gboolean

If TRUE, the transformation for the cairo context obtained from GtkPrintContext puts the origin at the top left corner of the page (which may not be the top left corner of the sheet, depending on page orientation and the number of pages per sheet). Otherwise, the origin is at the top left corner of the imageable area (i.e. inside the margins).

Flags: Read / Write

Default value: FALSE

Since 2.10

Signal Details

The “begin-print” signal

void
user_function (GtkPrintOperation *operation,
               GtkPrintContext   *context,
               gpointer           user_data)

Emitted after the user has finished changing print settings in the dialog, before the actual rendering starts.

A typical use for ::begin-print is to use the parameters from the GtkPrintContext and paginate the document accordingly, and then set the number of pages with gtk_print_operation_set_n_pages().

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

context

the GtkPrintContext for the current operation

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.10


The “create-custom-widget” signal

GObject*
user_function (GtkPrintOperation *operation,
               gpointer           user_data)

Emitted when displaying the print dialog. If you return a widget in a handler for this signal it will be added to a custom tab in the print dialog. You typically return a container widget with multiple widgets in it.

The print dialog owns the returned widget, and its lifetime is not controlled by the application. However, the widget is guaranteed to stay around until the “custom-widget-apply” signal is emitted on the operation. Then you can read out any information you need from the widgets.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

user_data

user data set when the signal handler was connected.

 

Returns

A custom widget that gets embedded in the print dialog, or NULL.

[transfer none]

Flags: Run Last

Since 2.10


The “custom-widget-apply” signal

void
user_function (GtkPrintOperation *operation,
               GtkWidget         *widget,
               gpointer           user_data)

Emitted right before “begin-print” if you added a custom widget in the “create-custom-widget” handler. When you get this signal you should read the information from the custom widgets, as the widgets are not guaraneed to be around at a later time.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

widget

the custom widget added in create-custom-widget

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.10


The “done” signal

void
user_function (GtkPrintOperation      *operation,
               GtkPrintOperationResult result,
               gpointer                user_data)

Emitted when the print operation run has finished doing everything required for printing.

result gives you information about what happened during the run. If result is GTK_PRINT_OPERATION_RESULT_ERROR then you can call gtk_print_operation_get_error() for more information.

If you enabled print status tracking then gtk_print_operation_is_finished() may still return FALSE after “done” was emitted.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

result

the result of the print operation

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.10


The “draw-page” signal

void
user_function (GtkPrintOperation *operation,
               GtkPrintContext   *context,
               gint               page_nr,
               gpointer           user_data)

Emitted for every page that is printed. The signal handler must render the page_nr 's page onto the cairo context obtained from context using gtk_print_context_get_cairo_context().

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
static void
draw_page (GtkPrintOperation *operation,
           GtkPrintContext   *context,
           gint               page_nr,
           gpointer           user_data)
{
  cairo_t *cr;
  PangoLayout *layout;
  gdouble width, text_height;
  gint layout_height;
  PangoFontDescription *desc;

  cr = gtk_print_context_get_cairo_context (context);
  width = gtk_print_context_get_width (context);

  cairo_rectangle (cr, 0, 0, width, HEADER_HEIGHT);

  cairo_set_source_rgb (cr, 0.8, 0.8, 0.8);
  cairo_fill (cr);

  layout = gtk_print_context_create_pango_layout (context);

  desc = pango_font_description_from_string ("sans 14");
  pango_layout_set_font_description (layout, desc);
  pango_font_description_free (desc);

  pango_layout_set_text (layout, "some text", -1);
  pango_layout_set_width (layout, width * PANGO_SCALE);
  pango_layout_set_alignment (layout, PANGO_ALIGN_CENTER);

  pango_layout_get_size (layout, NULL, &layout_height);
  text_height = (gdouble)layout_height / PANGO_SCALE;

  cairo_move_to (cr, width / 2,  (HEADER_HEIGHT - text_height) / 2);
  pango_cairo_show_layout (cr, layout);

  g_object_unref (layout);
}

Use gtk_print_operation_set_use_full_page() and gtk_print_operation_set_unit() before starting the print operation to set up the transformation of the cairo context according to your needs.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

context

the GtkPrintContext for the current operation

 

page_nr

the number of the currently printed page (0-based)

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.10


The “end-print” signal

void
user_function (GtkPrintOperation *operation,
               GtkPrintContext   *context,
               gpointer           user_data)

Emitted after all pages have been rendered. A handler for this signal can clean up any resources that have been allocated in the “begin-print” handler.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

context

the GtkPrintContext for the current operation

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.10


The “paginate” signal

gboolean
user_function (GtkPrintOperation *operation,
               GtkPrintContext   *context,
               gpointer           user_data)

Emitted after the “begin-print” signal, but before the actual rendering starts. It keeps getting emitted until a connected signal handler returns TRUE.

The ::paginate signal is intended to be used for paginating a document in small chunks, to avoid blocking the user interface for a long time. The signal handler should update the number of pages using gtk_print_operation_set_n_pages(), and return TRUE if the document has been completely paginated.

If you don't need to do pagination in chunks, you can simply do it all in the ::begin-print handler, and set the number of pages from there.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

context

the GtkPrintContext for the current operation

 

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if pagination is complete

Flags: Run Last

Since 2.10


The “preview” signal

gboolean
user_function (GtkPrintOperation        *operation,
               GtkPrintOperationPreview *preview,
               GtkPrintContext          *context,
               GtkWindow                *parent,
               gpointer                  user_data)

Gets emitted when a preview is requested from the native dialog.

The default handler for this signal uses an external viewer application to preview.

To implement a custom print preview, an application must return TRUE from its handler for this signal. In order to use the provided context for the preview implementation, it must be given a suitable cairo context with gtk_print_context_set_cairo_context().

The custom preview implementation can use gtk_print_operation_preview_is_selected() and gtk_print_operation_preview_render_page() to find pages which are selected for print and render them. The preview must be finished by calling gtk_print_operation_preview_end_preview() (typically in response to the user clicking a close button).

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

preview

the GtkPrintOperationPreview for the current operation

 

context

the GtkPrintContext that will be used

 

parent

the GtkWindow to use as window parent, or NULL.

[allow-none]

user_data

user data set when the signal handler was connected.

 

Returns

TRUE if the listener wants to take over control of the preview

Flags: Run Last

Since 2.10


The “request-page-setup” signal

void
user_function (GtkPrintOperation *operation,
               GtkPrintContext   *context,
               gint               page_nr,
               GtkPageSetup      *setup,
               gpointer           user_data)

Emitted once for every page that is printed, to give the application a chance to modify the page setup. Any changes done to setup will be in force only for printing this page.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

context

the GtkPrintContext for the current operation

 

page_nr

the number of the currently printed page (0-based)

 

setup

the GtkPageSetup

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.10


The “status-changed” signal

void
user_function (GtkPrintOperation *operation,
               gpointer           user_data)

Emitted at between the various phases of the print operation. See GtkPrintStatus for the phases that are being discriminated. Use gtk_print_operation_get_status() to find out the current status.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.10


The “update-custom-widget” signal

void
user_function (GtkPrintOperation *operation,
               GtkWidget         *widget,
               GtkPageSetup      *setup,
               GtkPrintSettings  *settings,
               gpointer           user_data)

Emitted after change of selected printer. The actual page setup and print settings are passed to the custom widget, which can actualize itself according to this change.

Parameters

operation

the GtkPrintOperation on which the signal was emitted

 

widget

the custom widget added in create-custom-widget

 

setup

actual page setup

 

settings

actual print settings

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

Since 2.18


The “got-page-size” signal

void
user_function (GtkPrintOperationPreview *preview,
               GtkPrintContext          *context,
               GtkPageSetup             *page_setup,
               gpointer                  user_data)

The ::got-page-size signal is emitted once for each page that gets rendered to the preview.

A handler for this signal should update the context according to page_setup and set up a suitable cairo context, using gtk_print_context_set_cairo_context().

Parameters

preview

the object on which the signal is emitted

 

context

the current GtkPrintContext

 

page_setup

the GtkPageSetup for the current page

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last


The “ready” signal

void
user_function (GtkPrintOperationPreview *preview,
               GtkPrintContext          *context,
               gpointer                  user_data)

The ::ready signal gets emitted once per preview operation, before the first page is rendered.

A handler for this signal can be used for setup tasks.

Parameters

preview

the object on which the signal is emitted

 

context

the current GtkPrintContext

 

user_data

user data set when the signal handler was connected.

 

Flags: Run Last

© manpagez.com 2000-2024
Individual documents may contain additional copyright information.