gtk_accel_group_new ()

GtkAccelGroup *
gtk_accel_group_new (void);

Creates a new GtkAccelGroup.

gtk_accel_group_connect ()

void
gtk_accel_group_connect (GtkAccelGroup *accel_group,
                         guint accel_key,
                         GdkModifierType accel_mods,
                         GtkAccelFlags accel_flags,
                         GClosure *closure);

Installs an accelerator in this group. When accel_group is being activated in response to a call to gtk_accel_groups_activate(), closure will be invoked if the accel_key and accel_mods from gtk_accel_groups_activate() match those of this connection.

The signature used for the closure is that of GtkAccelGroupActivate.

Note that, due to implementation details, a single closure can only be connected to one accelerator group.

gtk_accel_group_connect_by_path ()

void
gtk_accel_group_connect_by_path (GtkAccelGroup *accel_group,
                                 const gchar *accel_path,
                                 GClosure *closure);

Installs an accelerator in this group, using an accelerator path to look up the appropriate key and modifiers (see gtk_accel_map_add_entry()). When accel_group is being activated in response to a call to gtk_accel_groups_activate(), closure will be invoked if the accel_key and accel_mods from gtk_accel_groups_activate() match the key and modifiers for the path.

The signature used for the closure is that of GtkAccelGroupActivate.

Note that accel_path string will be stored in a GQuark. Therefore, if you pass a static string, you can save some memory by interning it first with g_intern_static_string().

GtkAccelGroupActivate ()

gboolean
(*GtkAccelGroupActivate) (GtkAccelGroup *accel_group,
                          GObject *acceleratable,
                          guint keyval,
                          GdkModifierType modifier);

GtkAccelGroupFindFunc ()

gboolean
(*GtkAccelGroupFindFunc) (GtkAccelKey *key,
                          GClosure *closure,
                          gpointer data);

Since: 2.2

gtk_accel_group_disconnect ()

gboolean
gtk_accel_group_disconnect (GtkAccelGroup *accel_group,
                            GClosure *closure);

Removes an accelerator previously installed through gtk_accel_group_connect().

Since 2.20 closure can be NULL.

gtk_accel_group_disconnect_key ()

gboolean
gtk_accel_group_disconnect_key (GtkAccelGroup *accel_group,
                                guint accel_key,
                                GdkModifierType accel_mods);

Removes an accelerator previously installed through gtk_accel_group_connect().

gtk_accel_group_activate ()

gboolean
gtk_accel_group_activate (GtkAccelGroup *accel_group,
                          GQuark accel_quark,
                          GObject *acceleratable,
                          guint accel_key,
                          GdkModifierType accel_mods);

Finds the first accelerator in accel_group that matches accel_key and accel_mods , and activates it.

gtk_accel_group_lock ()

void
gtk_accel_group_lock (GtkAccelGroup *accel_group);

Locks the given accelerator group.

Locking an acelerator group prevents the accelerators contained within it to be changed during runtime. Refer to gtk_accel_map_change_entry() about runtime accelerator changes.

If called more than once, accel_group remains locked until gtk_accel_group_unlock() has been called an equivalent number of times.

gtk_accel_group_unlock ()

void
gtk_accel_group_unlock (GtkAccelGroup *accel_group);

Undoes the last call to gtk_accel_group_lock() on this accel_group .

gtk_accel_group_get_is_locked ()

gboolean
gtk_accel_group_get_is_locked (GtkAccelGroup *accel_group);

Locks are added and removed using gtk_accel_group_lock() and gtk_accel_group_unlock().

Since: 2.14

gtk_accel_group_from_accel_closure ()

GtkAccelGroup *
gtk_accel_group_from_accel_closure (GClosure *closure);

Finds the GtkAccelGroup to which closure is connected; see gtk_accel_group_connect().

gtk_accel_group_get_modifier_mask ()

GdkModifierType
gtk_accel_group_get_modifier_mask (GtkAccelGroup *accel_group);

Gets a GdkModifierType representing the mask for this accel_group . For example, GDK_CONTROL_MASK, GDK_SHIFT_MASK, etc.

Since: 2.14

gtk_accel_groups_activate ()

gboolean
gtk_accel_groups_activate (GObject *object,
                           guint accel_key,
                           GdkModifierType accel_mods);

Finds the first accelerator in any GtkAccelGroup attached to object that matches accel_key and accel_mods , and activates that accelerator.

gtk_accel_groups_from_object ()

GSList *
gtk_accel_groups_from_object (GObject *object);

Gets a list of all accel groups which are attached to object .

gtk_accel_group_find ()

GtkAccelKey *
gtk_accel_group_find (GtkAccelGroup *accel_group,
                      GtkAccelGroupFindFunc find_func,
                      gpointer data);

Finds the first entry in an accelerator group for which find_func returns TRUE and returns its GtkAccelKey.

gtk_accelerator_valid ()

gboolean
gtk_accelerator_valid (guint keyval,
                       GdkModifierType modifiers);

Determines whether a given keyval and modifier mask constitute a valid keyboard accelerator. For example, the GDK_KEY_a keyval plus GDK_CONTROL_MASK is valid - this is a “Ctrl+a” accelerator. But, you can't, for instance, use the GDK_KEY_Control_L keyval as an accelerator.

gtk_accelerator_parse ()

void
gtk_accelerator_parse (const gchar *accelerator,
                       guint *accelerator_key,
                       GdkModifierType *accelerator_mods);

Parses a string representing an accelerator. The format looks like “<Control>a” or “<Shift><Alt>F1” or “<Release>z” (the last one is for key release).

The parser is fairly liberal and allows lower or upper case, and also abbreviations such as “<Ctl>” and “<Ctrl>”. Key names are parsed using gdk_keyval_from_name(). For character keys the name is not the symbol, but the lowercase name, e.g. one would use “<Ctrl>minus” instead of “<Ctrl>-”.

If the parse fails, accelerator_key and accelerator_mods will be set to 0 (zero).

gtk_accelerator_name ()

gchar *
gtk_accelerator_name (guint accelerator_key,
                      GdkModifierType accelerator_mods);

Converts an accelerator keyval and modifier mask into a string parseable by gtk_accelerator_parse(). For example, if you pass in GDK_KEY_q and GDK_CONTROL_MASK, this function returns “<Control>q”.

If you need to display accelerators in the user interface, see gtk_accelerator_get_label().

gtk_accelerator_get_label ()

gchar *
gtk_accelerator_get_label (guint accelerator_key,
                           GdkModifierType accelerator_mods);

Converts an accelerator keyval and modifier mask into a string which can be used to represent the accelerator to the user.

Since: 2.6

gtk_accelerator_parse_with_keycode ()

void
gtk_accelerator_parse_with_keycode (const gchar *accelerator,
                                    guint *accelerator_key,
                                    guint **accelerator_codes,
                                    GdkModifierType *accelerator_mods);

Parses a string representing an accelerator, similarly to gtk_accelerator_parse() but handles keycodes as well. This is only useful for system-level components, applications should use gtk_accelerator_parse() instead.

If accelerator_codes is given and the result stored in it is non-NULL, the result must be freed with g_free().

If a keycode is present in the accelerator and no accelerator_codes is given, the parse will fail.

If the parse fails, accelerator_key , accelerator_mods and accelerator_codes will be set to 0 (zero).

Since: 3.4

gtk_accelerator_name_with_keycode ()

gchar *
gtk_accelerator_name_with_keycode (GdkDisplay *display,
                                   guint accelerator_key,
                                   guint keycode,
                                   GdkModifierType accelerator_mods);

Converts an accelerator keyval and modifier mask into a string parseable by gtk_accelerator_parse_with_keycode(), similarly to gtk_accelerator_name() but handling keycodes. This is only useful for system-level components, applications should use gtk_accelerator_parse() instead.

Since: 3.4

gtk_accelerator_get_label_with_keycode ()

gchar *
gtk_accelerator_get_label_with_keycode
                               (GdkDisplay *display,
                                guint accelerator_key,
                                guint keycode,
                                GdkModifierType accelerator_mods);

Converts an accelerator keyval and modifier mask into a (possibly translated) string that can be displayed to a user, similarly to gtk_accelerator_get_label(), but handling keycodes.

This is only useful for system-level components, applications should use gtk_accelerator_parse() instead.

Since: 3.4

gtk_accelerator_set_default_mod_mask ()

void
gtk_accelerator_set_default_mod_mask (GdkModifierType default_mod_mask);

Sets the modifiers that will be considered significant for keyboard accelerators. The default mod mask depends on the GDK backend in use, but will typically include GDK_CONTROL_MASK | GDK_SHIFT_MASK | GDK_MOD1_MASK | GDK_SUPER_MASK | GDK_HYPER_MASK | GDK_META_MASK. In other words, Control, Shift, Alt, Super, Hyper and Meta. Other modifiers will by default be ignored by GtkAccelGroup.

You must include at least the three modifiers Control, Shift and Alt in any value you pass to this function.

The default mod mask should be changed on application startup, before using any accelerator groups.

gtk_accelerator_get_default_mod_mask ()

GdkModifierType
gtk_accelerator_get_default_mod_mask (void);

Gets the modifier mask.

The modifier mask determines which modifiers are considered significant for keyboard accelerators. See gtk_accelerator_set_default_mod_mask().

struct GtkAccelGroup

struct GtkAccelGroup;

An object representing and maintaining a group of accelerators.

struct GtkAccelGroupClass

struct GtkAccelGroupClass {
  GObjectClass parent_class;


  void (*accel_changed) (GtkAccelGroup *accel_group,
				 guint           keyval,
				 GdkModifierType modifier,
				 GClosure       *accel_closure);
};

enum GtkAccelFlags

Accelerator flags used with gtk_accel_group_connect().

struct GtkAccelKey

struct GtkAccelKey {
  guint           accel_key;
  GdkModifierType accel_mods;
  guint           accel_flags : 16;
};

The “is-locked” property

  “is-locked”                gboolean

Is the accel group locked.

Flags: Read

Default value: FALSE

The “modifier-mask” property

  “modifier-mask”            GdkModifierType

Modifier Mask.

Flags: Read

The “accel-activate” signal

gboolean
user_function (GtkAccelGroup  *accel_group,
               GObject        *acceleratable,
               guint           keyval,
               GdkModifierType modifier,
               gpointer        user_data)

The accel-activate signal is an implementation detail of GtkAccelGroup and not meant to be used by applications.

Flags: Has Details

The “accel-changed” signal

void
user_function (GtkAccelGroup  *accel_group,
               guint           keyval,
               GdkModifierType modifier,
               GClosure       *accel_closure,
               gpointer        user_data)

The accel-changed signal is emitted when an entry is added to or removed from the accel group.

Widgets like GtkAccelLabel which display an associated accelerator should connect to this signal, and rebuild their visual representation if the accel_closure is theirs.

Flags: Has Details